Stress corrosion cracking of the AISI 316L stainless steel HAZ in a PWR nuclear reactor environment

References

• Júlio , RB , Di Lorenzo , RF and Mansur , TR . 2002 . “ Management of ageing and extension of the life of nuclear power stations ” . In IX Brazilian Congress on Energy , Rio de Janeiro : COPPE/UFRJ . 2002, Rio de Janeiro. Minutes…
   Google Scholar
• Simes S, Cleto J, Fortes P, Seixas J. Activities developed with the TIMES model at the New University of Lisbon. In: Gary Goldsteir, GianCarlo Tosato, editor. Global Energy Systems and Common Analyses – Final report of annex X (2005–2008). ETSAP - international energy agency implementing agreement for a programme of energy technology systems analysis. Ed. Gary Goldstein and GianCarlo Tosato; 2008
   Google Scholar
• Jones , RH . 1992 . Stress corrosion cracking – materials performance and evaluation , Ohio : American Society of Metals International .
   Google Scholar
• Scott PM. An overview of materials degradation by stress corrosion in PWRs. Eurocorr – Annual European corrosion conference of the European federation of corrosion, 12–16 September, Nice Acropolis; 2004
   Google Scholar
• Alexandreanu B, Chen Y, Chopra KO, Chung MH, Gruber EE, Soppet KW, Shack JW. Environmentally assisted cracking in light water reactors. Argone National Laboratory – NUREG – CR-4667. US Regulatory Commission Office of Nuclear Regulatory Research, March 2007
   Google Scholar
• Jones , RH . 2003 . “ Stress corrosion cracking ” . In Corrosion: fundamentals, testing, and protection , ASM Handbook Vol. 13A , 879 – 936 . ASM International .
   Google Scholar
• Sedricks , AJ . 1990 . Stress corrosion cracking test methods in Corrosion testing made easy , NACE . In: Syrett BC, editor
   Google Scholar
• Sedricks , AJ . 1996 . Corrosion of stainless steel , 2nd ed. , New Jersey : Princeton .
   Google Scholar
• Danko , JC . 1992 . “ Corrosion in the nuclear power industry ” . ASM Handbook Vol. 13 , 927 ASM International . Corrosion
   Google Scholar
• EPRI – Electric Power research Institute. Review of SCC of Alloys 182, 82 in PWR Primary Service. MRP 220, 2007. Available from: www.epriweb.com/public0000000000001015427.pdf
   Google Scholar
• Gomez-Briceño D, Serrano M. Nickel based alloys in primary conditions for PWR nuclear power reactors. Materials, March; 2005
   Google Scholar
• Andresen , PL and Morra , MM . 2008 . IGSCC of non sensitised stainless steels in high temperature water . J Nucl Mater , 383 : 97 – 111 .
   Web of Science ®Google Scholar
• Sireesha , M , Shankar , V , Albert , SK and Sundaresan , S . 2000 . Micro structural features of dissimilar welds between 316 LN austenitic stainless steel and alloy 800 . Mater Sci Eng , A262 : 74 – 82 .
   Google Scholar
• Mitev R, Taylor NG. General review of dissimilar metal welds in piping systems of pressurised water reactors, including WWER designs. European Commission DG JRC/IE, Petten, Netherlands, EUR 22469 EN; 2006
   Google Scholar
• Jang , C , Lee , J , Kim , SJ and Jin , ET . 2007 . Mechanical property variation within Inconel 82/182 dissimilar metal weld between low alloy steel and 316 stainless steel . Int J Press Vess Piping , 85 : 635 – 646 .
   Google Scholar
• Faidy C, Gilles P. Assessment of dissimilar weld integrity: final report of the NESC III project. European Commission, EUR 22510 EM; 2006
   Google Scholar
• IAEA-International Atomic Energy Agency. Assessment and Management of Ageing of Major Nuclear Power Plant Components Important to Safety-Primary Piping in PWRs. IAEA – TECDOD 1361; 2003
   Google Scholar
• Feldstein , JG . 2003 . “ Dissimilar welds with stainless steel ” . In Welding, brazing and soldering , ASM Handbook Vol. 6 , 1279 – 1281 . ASM International .
   Google Scholar
• Schaefer A. Dissimilar metal weld failure problems in large steam generators. Power; 1979. p. 68–69
   Google Scholar
• National Association of Corrosion. Engineers – The National Association of Corrosion Engineers. Nace Standard test Method – SSRT Method for Screening Corrosion Resistant Alloys (CRAs) for Stress Corrosion Cracking in Sour Oilfield Service – TMO 198-2004; 2004
   Google Scholar
• American Society for Testing and Materials . 1995 . ASTM G129 – Standard practice for slow strain rate testing to evaluate the susceptibility of metallic materials to environmentally assisted cracking , West Conshohocken : Annual Book of ASTM Standards .
   Google Scholar
• American Society for Testing and Materials . 2000 . “ ASTM G49-Standard practice for preparation and use of direct tension stress corrosion test specimen ” . In Annual Book of ASTM Standards West Conshohocken
   Google Scholar
• American Society for Testing and Materials . 2000 . “ ASTM E8-Standard test methods for tension testing of metallic materials ” . In Annual Book of ASTM Standards West Conshohocken
   Google Scholar
• Ishiyama , N , Mayuzumi , M , Mizutani , Y and Tani , J-I . 2005 . “ Stress corrosion cracking of Type 316 and 316L stainless steel in high temperature water ” . In Proceedings of the 12th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water reactors, 2005, Minutes … TMS – The Minerals, Metals and Materials Society
   Google Scholar