100
Views
0
CrossRef citations to date
0
Altmetric
Articles

Estimation of phase transformation behaviour and high-temperature properties in SUS410 using visualization techniques

, , &
Pages 754-761 | Received 14 Jun 2013, Accepted 19 Jul 2014, Published online: 12 Feb 2015

References

  • Kujanpaa K, Suutala N, Takalo T, Mioiso T. Correlation between solidification cracking and microstructure in austenitic and austenitic–ferritic stainless steel welds. Weld Res Int. 1979;9:55–76.
  • Katayama S, Fujimoto T, Matsunawa A. Correlation among solidification process, microstructure, microsegregation and solidification cracking susceptibility in stainless steel weld metals. Trans JWRI. 1985;14:123–138.
  • Brooks JA, Thompson AW, Williams JC. A fundamental study of the beneficial effect of delta ferrite in reducing weld cracking. Weld J. 1984;63:71s–83s.
  • Schaeffler AL. Met Prog. 1949;56  :680–680B.
  • De Long WT, Ostrom GA, Szumachowski ER. Measurement and calculation of ferrite in stainless steel weld metal. Weld J. 1956;35:521s–528s.
  • Hammer O, Svensson U. Solidification and casting of metals. London: The Metals Society; 1979. p. 401–410.
  • Suutala: N, Takulo T, Moiso T. The relationship between solidification and microstructure in austenitic and austenitic-ferritic stainless steel welds. Metall Trans. 1979;10A:512–514.
  • Park SH, Esaka H, Shinozaki K. Change in primary dendrite arm spacing by abrupt change of growth velocity. J Jpn Inst Met. 2012;76:189–196.
  • Koseki T, Inoue H. Equiaxed solidification of steel nucleating on titanium nitride. J Jpn Inst Met. 2001;65:644–651  (in Japanese).
  • Shibata H, Emi T. Confocal scanning laser microscope technique to ‘in situ’ observe phase transformation and behavior of nonmetallic inclusions and precipitates in metals at elevated temperatures. Mat Jpn. 1997;36:809–813  (in Japanese).
  • Komizo Y, Terasaki H, Yonemura M, Osuki T. In situ observation of phase evolution in fusion welding of hypereutectoid carbon steel. Q J Jpn Weld Soc. 2006;24:57–64  (in Japanese).
  • Yasuda H, Nagira T, Yoshiya M, Nakatsuka N, Sugiyama A, Uesugi K, Umetani K. Development of X-ray imaging for observing solidification of carbon steels. ISIJ Int. 2011;51:402–408.
  • Shinozaki K, Yamamoto M, Wen P, Tamura T. Prediction of occurrence of solidification cracking in weld metal. J JWS. 2008;77:284–289  (in Japanese).
  • Steinbach I, Pezzola F, Nestler B, Seesselberg M, Prieler R, Schmitz GJ. Phase field concept for multiphase systems. Physica D. 1996;94:135–147.
  • Nogami A, Koseki T, Fukuda Y. Simulation of solidification morphology using Monte Carlo and finite difference hybrid modeling incorporated with computational thermodynamics. J Jpn Inst Met. 2003;42:506–513  (in Japanese).
  • Nakagawa M, Natsume Y, Ohsasa K. Dendrite growth model using front tracking technique with new growth algorithm. ISI J Int. 2006;46:909–913.
  • Nakama K, Haruna Y, Nakano J, Sridhar S. The effect of alloy solidification path on sulfide formation in Fe–Cr–Ni Alloys. ISIJ Int. 2009;49:355–364.
  • Fukumoto S, Nomoto S. Microstructure simulation for solidification of stainless steel by multi-phase field model. J Jpn Inst Met. 2009;72:502–508  (in Japanese).
  • Sundman B, Jonsson B, Andersson JO. The thermo calc databank system. CALPHAD. 1985;9:153–190.
  • Mizukami H, Suzuki T, Umeda T. Numerical analysis for initial stage of rapid solidification of 18Cr–8Ni stainless steel. Tetsu-to-Hagané. 1992;78:767–773  (in Japanese).
  • Kotecki DJ, Siewert TA. WRC-1992 constitution diagram for stainless steel weld metals. Weld J. 1992;71:171s–178s.
  • Fe-DATA (ver.6). Thermotech Ltd., Surrey Technology Center, The Surrey Research Park. Guildford Surrey; 2006.
  • Kurz W, Giovanola B, Trivedi R. Theory of microstructural development during rapid solidification. Acta Metall. 1986;34:23–830.
  • Fukumoto S, Inoue H. Evaluation of microstructure for mationin SUS304 by multi-phase-field method. Q J Jpn Weld Soc. 2011;29:197–203  (in Japanese).
  • Steven W, Haynes AG. The temperature of formation of Martensite and Bainite in low-alloy steels. J Iron Steel Inst. 1956:183349–183359.
  • Handbook of Stainless Steels. Nippon Kogyo Shinbun: Japan Stainless Steel Association; 1995. p. 101.
  • Iwasaki Y, Fukumoto S, Inoue H. Effect of cooling rate on microstructure formation of duplex stainless steel welds. Prepr Natl Meeting JWS. 2011;89:12–13  (in Japanese).
  • Koseki T, Flemings MC. Solidification of under cooled Fe–Cr–Ni alloys. Part I. Thermal behavior. Metall Mater Trans. 1995  :26A2991–26A2999.
  • Gjostein NA, Domain HA, Aaronson HI, Eichen E. Relative interfacial energies in Fe–C alloys. Acta Metall. 1966;14:1637–1644.
  • Eichen E, Aaronson HI, Pound GM, Trivedi RK. Thermionic emission microscopy study of the formation of ferrite sideplates. Acta Metall. 1964;12:1298–1301.
  • Van Vlack LH. Intergranular energy of iron and some iron alloys. Trans AIME. 1951;191:251–259.
  • Mizukami H, Yamanaka A, Watanabe T. Tensile strength of chromium steel during and after solidification. Tetsu-to-Hagané. 1999;85:592–598  (in Japanese).
  • Shin G, Kajitani T, Suzuki T, Umeda T. Mechanical properties of carbon steels during solidification. Tetsu-to-Hagané. 1992;78:587–593  (in Japanese).
  • Flemings MC, Poirier DR, Barone RV, Brody HD. Microsegregation in iron–base alloys. JISI. 1970;208:371–381.
  • Fukumoto S, Umeda T. Solidification microstructure control of stainless steels. Mater Jpn. 2001;40:150–157. (in Japanese).
  • Miettinen J. Calculation of solidification-related thermo physical properties for steels. Metall Mater Trans. 1997;28B:281–297.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.