Influence of thickness reduction in base plate on elastic stress state of patch plate joint by combination of welding and bonding

References

• Natori T, Nishikawa K, Murakoshi J, et al. Study on characteristics of corrosion damages in steel bridge members. J Jpn Soc Civil Eng. 2001;I-54(668):299–311. (in Japanese).
   Google Scholar
• Yokoyama K, Konishi T, Miki C. User participation type database of repair cases on fatigue failures. J Jpn Soc Civil Eng Ser A1 (SE/EE). 2017;73(1):126–145. (in Japanese).
   Google Scholar
• Ishikawa T. The current situation and issues of repair and strengthening of steel bridges by bonding CFRP strips. J Adhes Soc Jpn. 2009;45(4):139–144. (in Japanese).
   Google Scholar
• Morishita T, Fujii K, Morita K, et al. On rehabilitation of corroded steel plates by adhesive and steel cover plates. J Struct Eng A. 2011;57A:747–755. (in Japanese).
   Google Scholar
• Hirohata M. Effect of joint dimension and restraint conditions on residual stress generated by patch welding. J Jpn Soc Civil Eng Ser A2 (AM). 2016;72 (2):I_613-I_621. (in Japanese).
   Google Scholar
• Hirohata M. Static tensile strength characteristics of fillet welded lap joints assisted with bonding. Quarter J JWS. 2013;31(4):252–259. (in Japanese).
   Google Scholar
• Hirohata M. Elastic mechanical behavior of spliced joints assembled by fillet welding and bonding. Weld World. 2016;60(2):327–335.
   Web of Science ®Google Scholar
• Hirohata M, Itoh Y. Fatigue characteristics of patch plate joints by fillet welding assisted with bonding. Quarter J JWS. 2015;33(3):224–232. (in Japanese).
   Google Scholar
• Liu X, Hirohata M. Compressive behavior of steel members reinforced by patch plate with welding and bonding. Open J Civil Eng. 2018;8(4):341–357.
   Google Scholar
• Natori T, Nishikawa K, Murakoshi J, et al. Study on restrengthening of corroded steel bridge members. J Jpn Soc Civil Eng. 2001;I-56(682):207–224. (in Japanese).
   Google Scholar
• Chen X, Kitane Y, Itoh Y. Evaluation of repair design on corrosion-damaged steel pipe pies using welded patch plates under compression. J Struct Eng. 2011;57A:756–768.
   Google Scholar
• The Japan Iron and Steel Federation. Life cycle design for steel structures of port and harbor -current trend of maintenance management and improvement technology. Tokyo, Japan: The Japan Iron and Steel Federation; 2020. p. 77–90. (in Japanese).
   Google Scholar
• Japanese Standard Association. Solid wires for MAG and MIG welding of mild steel, high strength steel and low temperature service steel, JIS Z 3312. Tokyo, Japan: Japanese Standard Association; 2009. (in Japanese).
   Google Scholar
• Adams CM. Cooling rates and peak temperatures in fusion welding. Weld J. 1985;37-5:210s–215s.
   Google Scholar
• Japan Welding Society. Welding and joining handbook. 2nd edn. Tokyo, Japan: Maruzen; 2003. p. 548–553. (in Japanese).
   Google Scholar
• Cottrell CLM. Controlled thermal severity cracking test simulates practical welded joints. Weld J. 1953;32-6:257s–272s.
   Google Scholar
• Taniguchi T, Mori T, Endo K. A study on fatigue strength evaluation method for out-of-plane gusset welded joints failing from weld root. J Jpn Soc Civil Eng Ser A2 (AM). 2017;73(2):I_757–I_768. (in Japanese).
   Google Scholar
• Tanino T, Ogata H, Sakaida K, et al. A study on stress concentration factor on weld toes of cruciform welded joints by FEM analysis. J Jpn Soc Naval Architects Ocean Eng. 2016;24:309–315. (in Japanese).
   Google Scholar
• Tateishi K, Kitagawa K, Inaba N, et al. Fatigue crack propagation control by resin injection with local heating method. J Jpn Soc Civil Eng Ser A. 2006;62(1):126–131. (in Japanese).
   Google Scholar
• Tamari J, Ishikawa T, Hirohata M, et al. Fatigue strength improvement for weld root of sole plate by filling resin. Proc Construct Steel. 2019;27:749–758. (in Japanese).
   Google Scholar
• Tateishi K, Natori T, Miki C. Fatigue damage of shoes in plate girder bridges and improvement of their details. J Jpn Soc Civil Eng. 1994;I-27(489):167–176. (in Japanese).
   Google Scholar
• Niwa Y, Matsumoto K, Yajima S, et al. Reinforcement for fatigue damage of welded joints of sole plate in steel railway composite girder. J Struct Eng A. 2012;58A:611–621. (in Japanese).
   Google Scholar
• Nakanishi Y. Fracture and damage of bridge. J Jpn Weld Soc. 2018;87(6):23–28. (in Japanese).
   Google Scholar