References
- Grigoryants AG, Stavertiy AY, Bazaleeva KO, et al. Laser surfacing of nickel-based composite war-resisting coatings reinforced with tungsten carbide. Weld Int. 2017;(1):52–57.
- Grigor’yants AG, Shiganov IN, Misyurov AI, et al. Laser additive technologies in engineering. Moscow: Publ. MGTU im. N.E. Baumana; 2018. p. 280.
- Liu A, Guo M, Zhao M, et al. Microstructures and wear resistance of large WC particles reinforced surface metal matrix composites produced by plasma melt injection. Surf Coat Technol. 2007;(18):7978–7982.
- Lykov AM, Maslov VE, Glibina LA. Plasma hardening of flanges of locomotive and carriage wheels. Vestnik VNIIZhT. 2005;(1):31–33.
- Bogdanov AV, Grezev NV, Shmelev SA. Use of fibre lasers for increasing the wear resistance and contact fatigue strength of railway wheels. Naukoemkie Tekhnologii V Mashinostroenii. 2015;(6):30–34.
- Grigor’yants AG, Shiganov IN, Misyurov AI. Laser treatment processes: a university textbook. Moscow: Publ. MGTU im. N.E. Baumana; 2008. p. 664.
- Tong X, Li F-H, Kuang M, et al. Effects of WC particle size on the wear resistance of laser surface alloyed medium carbon steel. Appl Surf Sci. 2012;(7):3214–3220.
- Deschuyteneer D, Petit F, Gonon M, et al. Influence of large particle size — up to 1.2 mm — and morphology on wear resistance in NiCrBSi/WC laser cladded composite coatings. Surf Coat Technol. 2017;311:365–373.
- Zhong Y-M, Du X-D, Wu G. Effect of powder-feeding modes during plasma spray on the properties of tungsten carbide composite coatings. J Mater Eng Perform. 2017;(5):2285–2292.
- Grigor’yants AG, Shiganov IN, Tret’yakov RS, et al. Characteristic features of the formation of a composite surface layer by laser-powder introduction of tungsten carbide particles into a carbon steel matrix. Svarochnoe Proizvodstvo. 2018;(10):25–29.
- Perestoronin A, Grigoryants A, Tretyakov R, et al. The features of surface composite layer formation by laser-powder treatment of steel with tungsten carbide particles. IOP Conf Ser: J Phys. 2018;1109:Article numb. 012028.
- Ortiz A, Garcнa A, Cadenas M, et al. WC particles distribution model in the cross-section of laser cladded NiCrBSi + WC coatings, for different wt% WC. Surf Coat Technol. 2017;324:298–306.
- Wang L, Yao J, Hu Y, et al. Influence of electric-magnetic compound field on the WC particles distribution in laser melt injection. Surf Coat Technol. 2017;315l:32–43.
- Buvanashekaran G, Siva Shanmugam N, Sankaranarayanasamy K, et al. A study of laser welding modes with varying beam energy levels. Proc Inst Mech Eng Part C J Mech Eng Sci. 2008;(5):1141–1156.
- Fruehan RJ, Pittsburgh PA, Edited by. The making, shaping and treating of steel. Vol. 1. Pittsburgh: The AISE Steel Foundation; 1998. p. 11.
- Popel’ SI, Sotnikov AI, Boronenkov VN. Theory of metallurgical processes: a university textbook. Moscow: Metallurgiya; 1986. p. 463.
- Grigor’yants AG, Shiganov IN, Tret’yakov RS, et al. Hardening the surface of railway locomotive wheels by creating a composite layer by laser-powder treatment. Byulleten’ Ob”edinennogo uchenogo soveta OAO “RZhD”. 2018;(4):40–50.