References
- Shimizu T, Aoyanagi N. TS 780 MPa grade hot rolled sheet steels with high fatigue strength. Kawasaki Tech Rev. 1999;31-3:185–189. (in Japanese).
- Okamoto R, Asou T, Okada H. Development of hot rolled 780 MPa class steel sheet with excellent hall expansion ratio. Mater J. 2012;51-1:28–30. (in Japanese).
- Kitani Y, Matsuda H, Matsushita M, et al. Development of welding technologies for automotive chassis. JFE Techn Rep. 2018;41:55–61. (in Japanese).
- For example, Welding Fatigue Strength Research Committee, Japan Welding Society, ed. Fatigue of welded structures. Tokyo (Japan): SANPO PUBLICATIONS; 2015. p. 81. (in Japanese)
- Hashimoto S, Ogawa K, Nakagawa H, et al. Fatigue properties of fillet welded lap joints of high strength steel sheets. Preprint Nat Meet Jpn Weld Soc. 1994;55:402–403. (in Japanese)
- Uchihara A, Kurita M, Taka T. Effects of metallurgical properties on fatigue limit of arc-welded sheet steel. Tetsu-to-Hagané. 2000;86-5:52–58. (in Japanese)
- Yokoi T, Shirasawa H, Sugino T, et al. Fatigue property of fillet arc-welded hot-rolled high strength steels –2. Effects of welding conditions on fatigue limit of arc-welded steel. Curr Adv Mater Process. 1994;7-6:1665. (in Japanese).
- Feng Z, Sang Y, Jiang C, et al. Fatigue performance of advanced high-strength steels (AHSS) GMAW joints. SAE Technical Paper Series, SAE-2009-01-0256;2009. p. 8P.
- Bonnen JJF, Mandapati R, Kang HT, et al. Durability of advanced high strength steel gas metal arc welds. SAE Technical Paper Series, SAE-2009-01-025;2009. p. 17P.
- Kataoka T, Ikeda R, Ueda S, et al. Development of corrosion resistance and fatigue strength improvement welding technology of chassis parts (report 1) – study of fatigue strength improvement technology. Preprint Nat Meet Jpn Weld Soc. 2014;95:356–357. (in Japanese)
- Matsushita M, Kataoka T, Ikeda R, et al. Development of plasma-arc hybrid welding technology. Q J Jpn Weld Soc. 2012;30-1:77–85. (in Japanese).
- Kodama S, Matsuda K, Ishida Y, et al. Improvement of fatigue strength in fillet lap joints of high strength thin plates by using high strength welding wire. Preprint Nat Meet Jpn Weld Soc. 2016;99:378–379. (in Japanese)
- Kodama S, Fujimoto H, Ishida Y, et al. Arc welding technologies for high strength steel sheets for automotive chassis members. Nippon Steel Tech Rep. 2019;412:78–85. (in Japanese)
- Takahashi M. Development of high strength steels for automobiles. Nippon Steel Tech Rep. 2003;378:2–6. (in Japanese)
- Shiozaki T, Yamaguchi N, Tamai Y, et al. Effect of weld toe geometry on fatigue life of lap fillet welded ultra-high strength steel joints. Int J Fatigue. 2018;116:409–420.
- Hara N, Sugino T, Otsu M. High-tough welding consumables for 950N/mm2 class high-strength steels. R&D Kobe Steel Eng Rep. 2001;51-1:68–71. (in Japanese).
- Tokita Y, Shiozaki T, Tamai Y, et al. Fatigue properties of arc welded lap joints of joggled steel sheets. Trans Soc Automotive Eng J. 2019;50-1:160–165. (in Japanese).
- Tanaka M, Tashiro S. A study of thermal pinch effect of welding arcs. Q J Jpn Weld Soc. 2007;25-2:336–342. (in Japanese).
- Shigeta M, Nakanishi S, Tanaka M, et al. Analysis of dynamic plasma behaviours in gas metal arc welding by imaging spectroscopy. Weld Int. 2017;31-9:669–680.
- Yamamoto S, Suzuki S, Ando S, et al. Corrosion behavior of arc welded joints of chassis parts and an approach to improve its corrosion resistance. Q J Jpn Weld Soc. 2018;36-1:77–85. (in Japanese).
- Matsuda K, Kodama S. Observation of micro fatigue cracks at GMA welded joint of thin steel sheet. Q J Jpn Weld Soc. 2020;38-3:157–163. (in Japanese).
- Morikage Y, Handa T, Tagawa T, et al. Improvement mechanisms of fatigue strength in weld joints by hammer peening. Q J Jpn Weld Soc. 2019;37-1:17–23. (in Japanese).