Study of arc welding stability in flux cored arc welding process and pulsed continuous current

References

• American Welding Society. Welding handbook. Vol. 2, 8 ed. Miami/FL: American Welding Societ; 1991. DOI: https://doi.org/10.1007/978-1-349-03073-6.
   Google Scholar
• Norrish J. Advanced welding processes. Amsterdam/NL: Woodhead Publishing Series in Welding and Other Joining Technologies, Woodhead Publishing; 2006. DOI:https://doi.org/10.1533/9781845691707.1.
   Google Scholar
• Corrêa CA. Aço inoxidável martenstico aplicado em revestimento pelo processo mig pulsado e convencional. [Master’s thesis]. Campinas/SP: Universidade Estadual de Campinas, Faculdade de Eng. Mecânica; 2000. Available from: http://repositorio.unicamp.br/jspui/handle/REPOSIP/265296
   Google Scholar
• Bracarense AQ. Processo de soldagem TIG-GTAW. Belo Horizonte/MG:Universidade Federal de Minas Gerais; 2000. Available from: https://asmtreinamentos.com.br/downloads/soldador/arquivo40.pdf
   Google Scholar
• Khan MI. Welding science and technology. 1 ed. New Delhi/IN: New Age International (P) Limited; 2007. ISBN: 978–81–224–2073–9.
   Google Scholar
• Hermans M, Ouden GD. Process behavior and stability in short circuit gas metal arc welding. Weld J. 1999;78:137–s. Available from: https://app.aws.org/wj/supplement/S-1999.html
   Web of Science ®Google Scholar
• Zhang Y, Liguo E, Kovacevic R, et al. Active metal transfer control by monitoring excited droplet oscillation. Weld J N Y. 1998;77:388–s.
   Web of Science ®Google Scholar
• Marques PV, Modenesi PJ, Bracaraense AQ. Soldagem: fundamentos e Tecnologia. Vol. 3. Editora UFMG, Belo Horizonte/MG; 2009. Available from: https://books.google.com.br/books?id=uIxCk9IcgJECprintsec=frontcoverhl=pt-BRsource=gbs_atb#v=onepageqf=false
   Google Scholar
• Borba TMD, Flores WD, de Oliveira Turani L, et al. Assessment of the weldability of eh36 tmcp shipbuilding steel welded by high heat input submerged arc welding. Weld Int. 2016;31(3):184–195.
   Google Scholar
• Huang H-Y. Effects of activating flux on the welded joint characteristics in gas metal arc welding. Mater Des. 2010;31(5):2488–2495.
   Web of Science ®Google Scholar
• Lin H-L, Yan J-C. Optimization of weld bead geometry in the activated gma welding process via a grey-based taguchi method. J Mech Sci Technol. 2014;28(8):3249–3254.
   Web of Science ®Google Scholar
• Singla M, Singh D, Deepak D. Parametric optimization of gas metal arc welding processes by using factorial design approach. J Miner Mater Charact Eng. 2010;9(4):353–363.
   Google Scholar
• Wang Y, Tsai HL. Effects of surface active elements on weld pool fluid flow and weld penetration in gas metal arc welding. Metall Mat Trans B. 2001;32:501–515.
   Web of Science ®Google Scholar
• Zhang ZD, Cao QJ. Study on metal transfer behaviour in metal inert gas arc welding with activating flux for magnesium alloy. Sci Tec Weld Joining. 2012;17(7):550–555.
   Web of Science ®Google Scholar
• Liskevych O, Scotti A. Influence of the co2 content on operational performance of short-circuit gmaw. Weld World. 2015;59(2):217–224.
   Web of Science ®Google Scholar
• Biao C, Yuan-Peng X, Xiao-Qing L, et al. Approximate entropy—a new statistic to quantify arc and welding process stability in short-circuiting gas metal arc welding. Chin Phys B. 2008;17(3):865.
   Web of Science ®Google Scholar
• Roca AS, Fals HC, Fernández JB, et al. Stability analysis of the gas metal arc welding process based on acoustic emission technique. Weld Int. 2009;23(3):173–180.
   Google Scholar
• de Meneses VA, Gomes JFP, Scotti A. The effect of metal transfer stability (spattering) on fume generation, morphology and composition in short-circuit mag welding. J Mater Process Technol. 2014;214(7):1388–1397.
   Web of Science ®Google Scholar
• Rezende GMC, Liskévych O, Vilarinho LO, et al. Um critério para determinar a regulagem da tensão em soldagem mig/mag por curto-circuito. Soldagem Inspeção. 2011;16(2):98–103.
   Google Scholar
• Lima AC, Ferraresi VA. Study of metallic transfer modes of a self-shielded tubular wire with variation in the contact tube-workpiece distance. Weld Int. 2007;21(6):421–429.
   Google Scholar
• Nogueira RMU, Bohórquez CEN, Zanella IG. Comparison of arc stability and variability of geometry of welds obtained by mig/mag and fcaw processes. Weld Int. 2016;31(3):161–172.
   Google Scholar
• Souza D, Rossi ML, Keocheguerians F, et al. Influência da regulagem de parâmetros de soldagem sobre a estabilidade do processo mig/mag operando em curto-circuito. Soldagem Inspeção. 2011a;16(1):22–32.
   Google Scholar
• Corrêa CA. Uma contribuição ao processo de soldagem de revestimento com arame tubular pulsado de um aço CA6NM aplicando o método Taguchi. [PhD thesis]. Campinas/SP: Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica; 2018. Available from: http://repositorio.unicamp.br/jspui/handle/REPOSIP/331460
   Google Scholar
• ESAB. Ok tubrod 410nimo mc. especificações e downloads. 2006. Available from: https://www.esab.com.br/br/pt/products/filler-metals/gas-shielded-flux-cored-wires-fcaw/stainless-steel-wires/ok-tubrod-410nimo-mc.cfm
   Google Scholar
• Nyquist H. Certain topics in telegraph transmission theory. Trans Am Inst Electr Eng. 1928;47(2):617–644.
   Google Scholar
• Palani P, Murugan N. Selection of parameters of pulsed current gas metal arc welding. J Mater Process Technol. 2006;172(1):1–10.
   Web of Science ®Google Scholar
• Ferreira GRB, Campos RA, Moreira Filho RM, et al. Uma metodologia para análise da distribuição de contagem dos picos de tensão de reignição para avaliação da estabilidade do processo gmaw curto-circuito. Soldagem Inspeção. 2019;24:9.
   Google Scholar
• Souza D, Rossi ML, Keocheguerians F, et al. Influência da regulagem de parâmetros de soldagem sobre a estabilidade do processo mig/mag operando em curto-circuito. Soldagem Inspeção. 2011b;16(1):22–32.
   Google Scholar
• Castellanos OM, Moreno-Uribe AM, Ramón SA, et al. Evaluación de la transferencia metálica y estabilidad del proceso gmaw. Revista UIS Ingenierías. 2021;20(3):47–60.
   Google Scholar