References
- Okuda N, Yamada M, Wada T, et al. Narrow-gap submerged arc welding (The KNS method). In: Narrow-gap welding – the present situation in Japan, welding methods guide book. Tokyo: Japan Welding Society Technical Commission on Welding Processes. 1984. p. 140–143.
- Sugioka I, Motosugi H, Nishimura S, et al. Narrow-gap submerged arc welding (The SUBNAP method). In: Narrow-gap welding – the present situation in Japan, welding methods guidebook. Tokyo: Japan Welding Society Technical Commission on Welding Processes. 1984. p. 144–149.
- Adachi T, Narita A. Narrow-gap welding using the submerged arc welding method. In: Narrow-gap welding – the present situation in Japan, welding methods guidebook. Tokyo: Japan Welding Society Technical Commission on Welding Processes. 1984. p. 150–154.
- Katō I, Tsmura H. Narrow-gap submerged arc welding (The SNAF method). In: Narrow-gap welding – the present situation in Japan, welding methods guidebook. Tokyo: Japan Welding Society Technical Commission on Welding Processes. 1984. p. 155–159.
- Fusari F, Marangon P, Musti M, et al. Improvements in the welding technology for heavy pressure vessels 2¼Cr 1Mo ¼V low alloy steels. Proceedings of the ASME 2017 Pressure Vessels and Piping Conference; 2017 Jul 16-20; Waikoloa, HI.
- Andō A, Kobayahi K, Iijima T. A study of tandem SAW methods using current waveform control. Abstracts of the Japan Welding Society National Conference; 2010 Sept 7-9; Fukushima, Japan. 2010; 86: 146–147.
- Terasaki T, Akiyama T, Ishimoto K, et al. Proposal of an estimation formula for cooling time t8/5. Q J JWS. 1988;62:301–305.
- Miyata. A submerged arc welding power source fitted with a waveform control function. J JWS. 2008;77–7:635–639.
- Verwaerde L. Wave form controlled submerged arc welding. Proceedings of The First South-East Asia International Institute of Welding Congress; 21–22 Nov 2006; Bangkok (Thailand). p. 178–189.
- Shigeta M, Watanabe T. Numerical analysis for co-condensation processes in silicide nanoparticle synthesis using induction thermal plasma at atmospheric pressure conditions. J Mater Res. 2005;20(10):2801–2811.
- Shigeta M, Watanabe T. Multi-component co-condensation model of Ti-based boride/silicide nanoparticle growth in induction thermal plasmas. Thin Solid Films. 2007;515:4217–4227.
- Shigeta M, Watanabe T. Growth mechanism of silicon-based functional nanoparticles fabricated by inductively coupled thermal plasmas. J Phys D Appl Phys. 2007;40(8):2407–2419.
- Shigeta M, Watanabe T. Two-directional nodal model for co-condensation growth of multi-component nanoparticles in thermal plasma processing. J Therm Spray Technol. 2009;18(5–6):1022–1037.
- Shigeta M, Watanabe T. Growth model of binary alloy nanopowders for thermal plasma synthesis. J Appl Phys. 2010;108(4):043306 (15).
- Cheng Y, Shigeta M, Choi S, et al. Formation mechanism of titanium boride nanoparticles by RF induction thermal plasma. Chem Eng J. 2012;183:483–491.
- Shigeta M, Watanabe T. Effect of precursor fraction on silicide nanopowder growth under thermal plasma conditions: a computational study. Powder Technol. 2016;288:191–201.
- Shigeta M, Watanabe T. Effect of saturation pressure difference on metal-silicide nanopowder formation in thermal plasma fabrication. Nanomaterials. 2016;6:43 (10)
- Mendez F, Gott G, Guest SD. High-speed video of metal transfer in submerged arc welding. Weld J. 2015;94(10):325–332.
- Komen H, Abe Y, Fujimoto T, et al. Visualization of submerged arc welding phenomena by X-ray observation and direct observation. Weld Lett. 2018;36(4):9WL–12WL.
- Komen H, Matsui S, Konishi K, et al. Modelling of submerged arc welding phenomena and experimental study of the heat source characteristics. Q J Jpn Weld Soc. 2017;35(2):93–101. ( in Japanese).
- Asai S, Miyasaka F, Nomura K, et al. Recent progresses of welding and joining engineering. J Jpn Weld Soc. 2020;89(5):38–51. ( in Japanese).
- Komen H, Shigeta M, Tanaka M, et al. Incompressible SPH simulation of weld pool convection with molten metal droplets in a GMA welding. Q J Jpn Weld Soc. 2015;33(4):332–340. ( in Japanese).
- Komen H, Shigeta M, Tanaka M. Numerical simulation of molten metal droplet behavior in gas metal arc welding by three-dimensional incompressible smoothed particle hydrodynamics method. J Flow Control Meas Visualization. 2018;6:66–81.
- Komen H, Shigeta M, Tanaka M. Numerical simulation of molten metal droplet transfer and weld pool convection during gas metal arc welding using incompressible smoothed particle hydrodynamics method. Int J Heat Mass Transfer. 2018;121:978–985.
- Shigeta M, Tanaka M. Visualization of electromagnetic-thermal-fluid phenomena in arc welding. Jpn J Appl Phys. 2019;59:SA0805 (12).
- Shigeta M, Watanabe T, Izawa S, et al. Incompressible SPH simulation of double-diffusive convection phenomena. Int J Emerging Multidiscip Fluid Sci. 2009;1(1):1–18.
- Komen H, Shigeta M, Tanaka M, et al. Simulation of flux melting process during a SAW by DEM-ISPH hybrid method. Q J Jpn Weld Soc. 2017;35(2):38s–41s.
- Komen H, Shigeta M, Tanaka M, et al. Numerical simulation of slag forming process during submerged arc welding using DEM-ISPH hybrid method. Weld World. 2018;62(6):1323–1330.
- Matsunawa A, Nishiguchi K, Itō M. First layer bead formation phenomena and the narrow gap during argon metal arc welding. Abstracts of the Japan Welding Society National Conference; 1976 Nov 4-6; Osaka, Japan. 1976; 19: 274–275.
- Nakamura T, Mikami Y, Mochizuki M, et al. Identification of the basic characteristics of arc phenomena associated with reduction of the groove width and a proposed method of welding stabilisation. Q J JWS. 2001;19–1:44–53.
- Andō K, Hasegawa M. Welding arc phenomena. Sanpo Shuppan. 1962.