258
Views
1
CrossRef citations to date
0
Altmetric
Research Articles

Influence of deposit track on the forming and performance of wire arc additive manufactured 2319 aluminum alloy components

, , , , , & show all
Pages 9-16 | Received 15 Nov 2021, Accepted 08 Dec 2021, Published online: 05 Jan 2022

References

  • Li JG, Wang SQ. Distortion caused by residual stresses in machining aeronautical aluminum alloy parts: recent advances. Int J Adv Manuf Technol. 2017;89(1–4):997–1012.
  • Fan CL, Chen C, Lin SB, et al. Microstructure homogenization of 2A14 aluminum alloy weld seam by ultrasonic irradiation in metal inert gas welding. Int J Adv Manuf Technol. 2020;108(4):1085–1089.
  • Rao KS, Raju PN, Reddy GM, et al. Microstructure and high temperature strength of age hardenable AA2219 aluminium alloy modified by Sc, Mg and Zr additions. Mater Sci Eng A. 2007;25(1):92–101.
  • Spencer JD, Dickens PM, Wykes CM. Rapid prototyping of metal parts by three-dimensional welding. Proc Institution Mech Eng Part B. 1998;212(3):175–182.
  • Escobar PG, Gault R, Ridgway K. Preliminary empirical models for predictingshrinkage, part geometry and metallurgical aspects of Ti-6A1-4V shaped metaldeposition builds. IOP Conf Ser Mater Sci Eng. 2011;26(1):002–012.
  • Wang Y. Effect of the content of Cu on the solidification characteristics of Al-Cu alloys. Doctoral dissertation, Harbin University of Science and Technology;2015.
  • Huang C, Kou S. Liquation cracking in full-penetration Al-Cu welds. Weld Res. 2004;83(2):50–58.
  • Li H, Zou JS, Yao JS, et al. Uniform design and optimization of active agent and technology research for A-TIG welding of 2219 aluminum alloy. Int J Adv Manuf Technol. 2017;92(9):3435–3446.
  • Babu NK, Talari MK, Pan D, et al. High-temperature mechanical properties investigation of Al-6.5 % Cu gas tungsten arc welds made with scandium modified 2319 filler. Int J Adv Manuf Technol. 2013;65(9–12):1757–1767.
  • Yao YF, Wang MQ, Fang XW, et al. Cold metal transition (CMT) additive manufacturing 2219 aluminum alloy performance. Weld Joining. 2019;53(6):53–60+68.
  • Cong BQ, Ding JL, Williams S. Effect of arc mode in cold metal transfer process on porosity of additively manufactured Al-6.3%Cu alloy. Int J Adv Manuf Technol. 2015;76(9–12):1593–1606.
  • Song YA, Park S, Choi D, et al. 3D welding and milling: part I-a direct approach for freeform fabrication of metallic prototypes. Int J Mach Tools Manuf. 2005;45(9):1057–1062.
  • Yin F, Wang KH, Feng YH, et al. Width dimension modeling and analysis of wire and arc additive manufacture. Mach Build Autom. 2018;3:119–122.
  • Chaurasia M, Sinha MK. Investigations on process parameters of wire arc additive manufacturing (WAAM): a review. In: Singari, RM, Mathiyazhagan, K, Kumar, editors. Advances in manufacturing and industrial engineering. Singapore: Springer. 2021. p. 845–853.
  • Karpagaraj A, Sel B, Thangavelu A, et al. A review on the suitability of wire arc additive manufacturing (WAAM) for stainless steel 316. AIP Conf Proc. 2020;2247(1):050001.
  • Patel M, Mulgaonkar S, Desai H, et al. Development and Implementation of Wire Arc Additive Manufacturing (WAAM) based on pulse spray GMAW for aluminum alloy (AlSi7Mg). Trans Indian Inst Met. 2021; 74:1129–1140.
  • Zeng Y, Wang XK, Qin XP, et al. Laser ultrasonic inspection of a Wire + Arc Additive Manufactured (WAAM) sample with artificial defects. Ultrasonics. 2021;110:106273.
  • Bai JY. Microstructure evolution of 2219-Al during GTA based additive manufacturing and heat treatment. Harbin: Harbin Institute of Technology; 2017.
  • Zhang L, Zhang ZD, Liu LM. Study on forming principles for arc additive manufacturing part of 316 stainless steel. Weld Technol. 2018;303(4):18–22.
  • Henckell P, Gierth M, Ali Y, et al. Reduction of energy input in wire arc additive manufacturing (WAAM) with gas metal arc welding (GMAW). Materials. 2020;13(11):2491.
  • Manurung YHP, Prajadhiana KP, Adenan MS, et al. Analysis of material property medels on WAAM distortion using nonlinear numerical computation and experimental verification with P-GMAW. Arch Civil Mech Eng. 2021;21(1):1–13.
  • Langelandsvik G, Horgar A, Furu T, et al. Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting. Int J Adv Manuf Technol. 2020;110(3–4):935–947.
  • Li XW, Song G, Zhang ZD, et al. Microstructure and properties of 316 stainless steel produced by laser-induced arc hybrid additive manufacturing. Chin J Lasers. 2019;46(12):101–109.
  • Hajizadeh P, Giyahban A, Eini S. Predicting the effect of temperature on layer geometry using thermal simulation of wired and arc additive manufacturing (WAAM) process. 9th International Conference of Material Engineering and Metallurgy; 2020 November 10–11; Chiba University, Japan.
  • Saadatmand M, Talemi R. Study on the thermal cycle of wire arc additive manufactured (WAAM) carbon steel wall using numerical simulation. Frattura ed Integrità Strutturale. 2020;14(52):98–104.
  • Manokruang S, Vignat F, Museau M, et al. Process parameters effect on weld beads geometry deposited by Wire and Arc Additive Manufacturing (WAAM). International Joint Conference on Mechanics, Design Engineering and Advanced Manufacturing; 2020 June 2–4; Aix-en-Provence, France.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.