Microstructure and mechanical properties of TC4 titanium alloy and 316L stainless steel joint by MIG welding with mortise structure

References

• Hao X, Dong H, Li P, et al. Dissimilar joining of TC4 alloy to ST16 steel by GTAW. J Manuf Process. 2019;37:413–417.
   Web of Science ®Google Scholar
• Gnyusov SF, Klimenov VA, Alkhimov YV, et al. Formation of the structure of titanium and stainless steel in laser welding. Weld Int. 2013;27(4):295–299.
   Google Scholar
• Xia Y, Dong H, Li P. Brazing TC4 titanium alloy/316L stainless steel joint with Ti50-xZrxCu39Ni11 amorphous filler metals. J Alloys Compd. 2020;849:156650.
   Web of Science ®Google Scholar
• Hashi O, El K, Irie H. Diffusion welding of SUS304L stainless steel to titanium. Weld Int. 1996;10(3):188–192.
   Google Scholar
• Li P, Li C, Dong H, et al. Vacuum diffusion bonding of TC4 titanium alloy to 316L stainless steel with AlCoCrCuNi2 high-entropy alloy interlayer. J Alloys Compd. 2022;909:164698.
   Web of Science ®Google Scholar
• Futamata M, Fuji A. Friction welding of titanium and SUS 304L austenitic stainless steel. Weld Int. 1990;4(10):768–774.
   Google Scholar
• Dong H, Yu L, Deng D, et al. Effect of post-weld heat treatment on properties of friction welded joint between TC4 titanium alloy and 40Cr steel rods. J Mater Sci Technol. 2015;31(9):962–968.
   Web of Science ®Google Scholar
• Li J, Liu Y, Zhen Z, et al. Weld formation mechanism and microstructural evolution of TC4/304 stainless steel joint with Cu-Based filler wire and preheating. Mater. 2019;12(19):3071.
   Google Scholar
• Pardal G, Ganguly S, Williams S, et al. Dissimilar metal joining of stainless steel and titanium using copper as transition metal. Int J Adv Manuf Technol. 2016;86(5–8):1139–1150.
   Web of Science ®Google Scholar
• Mou G, Hua X, Wang M, et al. Effects of Ni addition on removing Fe-Ti intermetallic compounds in cold metal transfer arc-brazed TC4/304L dissimilar joints. J Manuf Process. 2019;38:104–112.
   Web of Science ®Google Scholar
• Mou G, Hua X, Wang M, et al. Effect of axial magnetic field on cold metal transfer arc-brazing of Ti6Al4V to 304L steel. J Mater Process Technol. 2020;275:116322.
   Web of Science ®Google Scholar
• Hao X, Dong H, Yu F, et al. Arc welding of titanium alloy to stainless steel with Cu foil as interlayer and Ni-based alloy as filler metal. J Mater Res Technol. 2021;13:48–60.
   Google Scholar
• Reza-E-Rabby M, Ross K, Overman NR, et al. Joining thick section aluminum to steel with suppressed FeAl intermetallic formation via friction stir dovetailing. Scr Mater. 2018;148:63–67.
   Web of Science ®Google Scholar
• Huang Y, Wang J, Wan L, et al. Self-riveting friction stir lap welding of aluminum alloy to steel. Mater Lett. 2016;185:181–184.
   Web of Science ®Google Scholar
• Huang Y, Huang T, Wan L, et al. Material flow and mechanical properties of aluminum-to-steel self-riveting friction stir lap joints. J Mater Process Technol. 2019;263:129–137.
   Web of Science ®Google Scholar
• Whalen S, Reza-E-Rabby M, Ross K, et al. inventor; Battelle Memorial Institute, Richland, WA (US), assignee. Methods and devices for connecting two dissimilar materials. US2020016687A12020. Jan. 16.
   Google Scholar
• Hao X. Microstructure and mechanical properties of TC4 titanium alloy/304 stainless steel sheets gas tungsten arc welded joint[dissertation]. Dalian University of Technology; 2020.
   Google Scholar
• Hao X, Li P, Xia Y, et al. Microstructure and mechanical properties of dissimilar TC4 titanium alloy/304 stainless steel joint using copper filler wire. Metall and Mat Trans A. 2019;50(2):688–703.
   Google Scholar
• Raghavan V. Fe-Si-Ti (Iron-Silicon-Titanium). J. Phase Equilib. Diffus. 2009;30(4):393–396.
   Web of Science ®Google Scholar
• Mou G, Hua X, Wu D, et al. Microstructure and mechanical properties of cold metal transfer welding-brazing of titanium alloy (TC4) to stainless steel (304L) using V-shaped groove joints. J Mater Process Technol. 2019;266:696–706.
   Web of Science ®Google Scholar
• Du Z. 焊接冶金学-基本原理 [welding Metallurgy-Basic principles]. Beijing: China Machine Press; 2018. Chinese.
   Google Scholar
• Zhang Y, Sun DQ, Gu XY, et al. Nd/YAG pulsed laser welding of TC4 titanium alloy to 301L stainless steel via pure copper interlayer. Int J Adv Manuf Technol. 2017;90(1-4):953–961.
   Web of Science ®Google Scholar
• Mou G, Hua X, Shen C, et al. Effects of thermal distribution strategy on a Ti-6Al-4V/304L dissimilar joint fabricated using the variable polarity cold metal transfer arc-brazing method. Mater Des. 2020;191:108619.
   Web of Science ®Google Scholar
• Thaddeus B. Binary alloy phase diagrams second edition. 2nd ed. Ohio(OH): ASM International. 1990.
   Google Scholar
• Hao X, Dong H, Li S, et al. Lap joining of TC4 titanium alloy to 304 stainless steel with fillet weld by GTAW using copper-based filler wire. J Mater Process Technol. 2018;257:88–100.
   Web of Science ®Google Scholar
• Jin P, Sun Q, Liu Y, et al. Microstructural evolution and mechanical property of TC4/304 stainless steel joined by CMT using a CuSi3 filler wire. J Manuf Process. 2020;60:308–317.
   Web of Science ®Google Scholar
• Mou G, Hua X, Huang Y, et al. Study on the microstructure optimization and mechanical properties of dissimilar TC4-304L arc-brazing joints. Mater Sci Eng A. 2020;788:139566.
   Web of Science ®Google Scholar
• Raghavan V. Cu-Fe-Ti (Copper-Iron-Titanium). JPE. 2002;23(2):172–174.
   Google Scholar
• Wu B, Dong H, Li P, et al. Vacuum diffusion bonding of TC4 titanium alloy and T2 copper by a slow cooling heat treatment. J Mater Process Technol. 2022;305:117595.
   Web of Science ®Google Scholar
• Dong H, Hu W, Zhang X. Detachment of interfacial layers during arc-brazing of aluminum alloy to carbon steel with filler wire. Trans Nonferrous Met Soc China. 2013;23(6):1583–1588.
   Web of Science ®Google Scholar
• Huang L, Dong H, Ma Y, et al. Interfacial layer regulation and its effect on mechanical properties of Ti6Al4V titanium alloy and T2 copper dissimilar joints by cold metal transfer welding. J Manuf Process. 2022;75:1100–1110.
   Web of Science ®Google Scholar
• Aboulfadl H, Deges J, Choi P, et al. Dynamic strain aging studied at the atomic scale. Acta Mater. 2015;86:34–42.
   Web of Science ®Google Scholar
• He P, Webster RF, Yakubov V, et al. Fatigue and dynamic aging behavior of a high strength Al-5024 alloy fabricated by laser powder bed fusion additive manufacturing. Acta Mater. 2021;220:117312.
   Web of Science ®Google Scholar
• Rodriguez P. Serrated plastic flow. Bull. Mater. Sci. 1984;6(4):653–663.
   Google Scholar
• Jin P, Liu Y, Sun Q, et al. Wetting mechanism and microstructure evolution of TC4/304 stainless steel joined by CMT with an assisted hybrid magnetic field. J. Alloys Compd. 2020;819:152951.
   Web of Science ®Google Scholar
• Zhong Q, Zhao Z. 断口学 [Fractography]. Beijing: higher Education Press; 2006. Chinese.
   Google Scholar
• Shu D. 工程材料力学性能 [Mechanical properties of engineering materials]. Beijing: China Machine Press; 2004. Chinese.
   Google Scholar
• Chu Q, Bai R, Zhang M, et al. Microstructure and mechanical properties of titanium/steel bimetallic joints. Mater Charact. 2017;132:330–337.
   Web of Science ®Google Scholar