Effects of annealing on the interfacial microstructure and mechanical properties of explosively welded AZ80 magnesium alloy and A6005C aluminium alloy

References

• Zhao Y, Ding Z, Chen Y. Crystallographic orientations of intermetallic compounds of a multi-pass friction stir processed Al/Mg composite materials. Mater Charact. 2017;128:156–164.
   Web of Science ®Google Scholar
• Liu F, Ren D, Liu L. Effect of Al foils interlayer on microstructures and mechanical properties of Mg-Al butt joints welded by gas tungsten arc welding filling with Zn filler metal. Mater Des. 2013;46:419–425.
   Web of Science ®Google Scholar
• Fernandus MJ, Senthilkumar T, Balasubramanian V, et al. Optimizing diffusion bonding parameters to maximize the strength of AA6061 aluminium and AZ31B magnesium alloy joints. Mater Des. 2012;33:31–41.
   Web of Science ®Google Scholar
• Zhu B, Liang W, Li XR. Interfacial microstructure, bonding strength and fracture of magnesium–aluminium laminated composite plates fabricated by direct hot pressing. Mat Sci Eng. 2011;528(21):6584–6588.
   Google Scholar
• Yamamoto N, Liao J, Watanabe S, et al. Effect of intermetallic compound layer on tensile strength of dissimilar friction stir weld of a high strength Mg alloy and Al alloy. Mater Trans. 2009;50(12):2833–2838.
   Web of Science ®Google Scholar
• Islam MR, Ishak M, Shah LH, et al. Dissimilar welding of A7075-T651 and AZ31B alloys by gas metal arc plug welding method. Int J Adv Manuf Technol. 2017;88(9–12):2773–2783.
   Web of Science ®Google Scholar
• Zhao Y, Lu Z, Yan K, et al. Microstructural characterizations and mechanical properties in underwater friction stir welding of aluminium and magnesium dissimilar alloys. Mater Des. 2015;65:675–681.
   Web of Science ®Google Scholar
• Morishige T, Kawaguchi A, Tsujikawa M, et al. Dissimilar welding of Al and Mg alloys by FSW. Mater Trans. 2008;49(5):1129–1131.
   Web of Science ®Google Scholar
• Onzawa T. The mechanism of wave formation in explosively bonded interface. J High Press Inst Japan. 1975;13:103–109.
   Google Scholar
• Findik F. Recent developments in explosive welding. Mater Des. 2011;32(3):1081–1093.
   Web of Science ®Google Scholar
• Otsuka M. Transition joints using explosive welding clad. J High Press Inst Japan. 2015;53:42–45.
   Google Scholar
• Bataev IA, Tanaka S, Zhou Q, et al. Towards better understanding of explosive welding by combination of numerical simulation and experimental study. Mater Des. 2019;169:107649.
   Web of Science ®Google Scholar
• Yan YB, Zhang ZW, Shen W, et al. Microstructure and properties of magnesium AZ31B– aluminium 7075 explosively welded composite plate. Mater Sci Eng, A. 2010;527(9):2241–2245.
   Web of Science ®Google Scholar
• Ghaderi SH, Mori A, Hokamoto K. Analysis of explosively welded aluminium–AZ31 magnesium alloy joints. Mater Trans. 2008;49(5):1142–1147.
   Web of Science ®Google Scholar
• Chen P, Feng J, Zhou Q, et al. Investigation on the explosive welding of 1100 aluminium alloy and AZ31 magnesium alloy. J Mater Eng Perform. 2016;25(7):2635–2641.
   Web of Science ®Google Scholar
• Zhang T, Wang W, Zhang W, et al. Microstructure evolution and mechanical properties of an AA6061/AZ31B alloy plate fabricated by explosive welding. J Alloys Compd. 2018;735:1759–1768.
   Web of Science ®Google Scholar
• Asai K, Mihara-Narita M, Sato H, et al. Effect of magnesium alloy compositions on the interfacial microstructure, corrosion resistance and mechanical properties of explosively welded magnesium/aluminium alloys. J Jpn Inst Light Met. 2022;72(5):255–264.
   Google Scholar
• Mihara-Narita M, Asai K, Sato H, et al. Interfacial microstructure and mechanical properties of explosively welded Mg/Al alloy plates. J Mater Eng Perform. 2022;31(9):7039–7048.
   Web of Science ®Google Scholar
• Mihara-Narita M, Mori H, Sato H, et al. Characterization of metallographic structure of interface on explosively welded magnesium alloy/aluminium alloy clad materials. J Light Metal Weld. 2022;60:38–45.
   Google Scholar
• Karolczuk A, Kowalski M, Kluger K, et al. Identification of residual stress phenomena based on the hole drilling method in explosively welded Steel-Titanium composite. Arch Metall Mater. 2014;59(3):1119–1123.
   Web of Science ®Google Scholar
• Li N, Zhang M, Ye J, et al. Experimental investigation on residual stress distribution in zirconium/titanium/steel tri-metal explosively welded composite plate after cutting and welding of a cover plate. J Manuf Processes. 2021;64:455–463.
   Web of Science ®Google Scholar
• Sahul M, Sahul M, Lokaj J, et al. The effect of annealing on the properties of AW5754 aluminium Alloy-AZ31B magnesium alloy explosively welded bimetals. J Mater Eng Perform. 2019;28(10):6192–6208.
   Web of Science ®Google Scholar
• Edited by T. B. Massalski: Binary alloy phase diagrams. 2nd ed. Almere (NL): ASM International; 1990. p. 169–171.
   Google Scholar
• Matsumoto K, Nishimoto A, Ishikawa T, et al. Dissimilar materials joining of A6061 Al alloy and AZ31 Mg alloy by laser welding. J Light Metal Weld. 2019;57:198–206.
   Google Scholar
• Su Z, Zhu Z, Zhang Y, et al. Analysis of microstructure and mechanical properties of AZ31B magnesium alloy/AA6061 aluminium alloy welded joint by ultrasonic welding. Mat Res. 2021;24(2):e20200488.
   Web of Science ®Google Scholar
• Varavallo R, Moreira VM, Paes V, et al. Welding induced residual stresses in explosion cladded AL- 6XN superaustenitic stainless steel and ASME SA516-70 steel composite plates. Adv Mater Res. 2014;996:451–456.
   Google Scholar
• Sedighi M, Honarpisheh M. Experimental study of through-depth residual stress in explosive welded Al-Cu-Al multilayer. Mater Des. 2012;37:577–581.
   Web of Science ®Google Scholar
• Nakata K. Weldability of magnesium alloys. J Light Metal Weld. 2001;39:582–591.
   Google Scholar
• Karolczuk A, Kowalski M, Bański R, et al. Fatigue phenomena in explosively welded steel-Titanium clad components subjected to push-pull loading. Int J Fatigue. 2013;48:101–108.
   Web of Science ®Google Scholar
• Karolczuk A, Carpinteri A, Robak G, et al. Fatigue failure analysis of three-layer Zr–Ti/Zr–steel composite plates: an insight into the evolution of cracks initiated at the interfaces. Arch Civ Mech Eng. 2020;20(4):1–13.
   Web of Science ®Google Scholar