Cyclic true stress true strain relation in the large strain region of common steel for welded structures

References

• Toyosada M, Gotoh K, Niwa T. Fatigue crack propagation for a through thickness crack: a crack propagation law considering cyclic plasticity near the crack tip. Int J Fatigue. 2004;26(9):983–992. doi: 10.1016/j.ijfatigue.2003.12.006
   Web of Science ®Google Scholar
• K Yamaguchi KG. Numerical simulation of fatigue crack propagation considering the alternating plastic behavior that occurs near the crack tip using Elastic-Plastic finite element analysis. Conf Proc Jpn Soc Nav Archit Ocean Eng. 2021;32:417–422. in Japanese)
   Google Scholar
• Tsutsumi S, Murakami K, Gotoh K, et al. Cyclic stress-strain relation under high cycle fatigue process -Elastoplastic constitutive model incorporating cyclic damage. JJASNAOE. 2008;7(0):243–250. doi: 10.2534/jjasnaoe.7.243
   Google Scholar
• Ma Z, Zhao H, Liu C. Prediction method of low cyclic Stress-Strain curve of structural materials. Mater Trans. 2015;56(7):1067–1071. doi: 10.2320/matertrans.M2015085
   Web of Science ®Google Scholar
• Landgraf RW, Morrow JD, Endo T. Determination of the cyclic stress-strain curve. J Mater. 1969;4(1):176–188.
   Web of Science ®Google Scholar
• Lopez Z, Fatemi A. A method of predicting cyclic stress strain curve from tensile properties for steels. Mater Sci Eng A. 2012;556:540–550. doi: 10.1016/j.msea.2012.07.024
   Web of Science ®Google Scholar
• Zhang Z, Qiao Y, Sun Q, et al. Theoretical estimation to the cyclic strength coefficient and the cyclic Strain-Hardening exponent for metallic materials: preliminary study. J of Materi Eng and Perform. 2009;18(3):245–254. doi: 10.1007/s11665-008-9286-5
   Web of Science ®Google Scholar
• Zonfrillo G. New correlations between monotonic and cyclic properties of metallic materials. J of Materi Eng and Perform. 2017;26(4):1569–1580. doi: 10.1007/s11665-017-2595-9
   Web of Science ®Google Scholar
• Ghajar R, Naserifar N, Sadati H, et al. A neural network approach for predicting steel properties characterizing cyclic Ramberg–Osgood equation. 2011;34(7):534–544. doi: 10.1111/j.1460-2695.2010.01545.x
   Google Scholar
• Marohni T, Basan R, Franulovi M. Evaluation of the possibility of estimating cyclic stress-strain parameters and curves from monotonic properties of steels. Procedia Eng. 2015;101:277–284. doi: 10.1016/j.proeng.2015.02.029
   Google Scholar
• Li J, Zhang Z, Li C. An improved method for estimation of Ramberg–Osgood curves of steels from monotonic tensile properties. Fatigue Fract Eng Mat Struct. 2016;39(4):412–426. doi: 10.1111/ffe.12366
   Web of Science ®Google Scholar
• Nishikawa H, Furuya Y. Cyclic yield characterization for low-carbon steel with HAZ microstructures. Mater Trans. 2019;60(2):207–212. doi: 10.2320/matertrans.ME201717
   Web of Science ®Google Scholar
• Bridgman PW. Studies in large plastic flow and fracture. New York (NY): McGraw-Hill Book Campany Inc; 1952.
   Google Scholar
• Rosa GL, Risitano A, Mirone G. Postnecking elastoplastic characterization: degree of approximation in the Bridgman method and properties of the flow-stress/true-stress ratio. Metall Mater Trans A. 2003;34(3):615–624. doi: 10.1007/s11661-003-0096-y
   Web of Science ®Google Scholar
• Murata M, Nishiwaki T, Yoshida Y. Stress correction method for flow stress identification by tensile test using notched round bar. Journal of the JSTP. 2016;57(669):977–982. in Japanese) doi: 10.9773/sosei.57.977
   Google Scholar
• Polák J. M.Hájek: cyclic stress-strain curve evaluation using incremental step test procedure. Int J Fatigue. 1991;13(3):216–222.
   Web of Science ®Google Scholar
• Tanaka K, Nishijima S, Matsuoka S, et al. Low- and high-cycle fatigue properties of various steels specified in jis for machine structural use. Fat Frac Eng Mat Struct. 1981;4(1):97–108. doi: 10.1111/j.1460-2695.1981.tb01377.x
   Google Scholar
• Hatanaka K. Cyclic Stress-Strain response and low cycle fatigue life in metallic materials. TransJSME, SerA. 1984;50(453):831–838. in Japanese) doi: 10.1299/kikaia.50.831
   Google Scholar
• Furukawa H. Plasticity engineering (I) - Plasticity from the microscopic viewpoint. J Jpn Soc Precis Eng. 1972;38(454):976–985.
   Google Scholar
• Honeyman AJK. The metallurgy of steels for deep drawing. Sheet Metal Ind. 1957;34:51–65.
   Google Scholar
• Takaki S. Yielding and deformation behavior in polycrystalline ferritic steel. J Japan Inst Metals. 2019;83(4):107–118. Japanese) doi: 10.2320/jinstmet.J2018061
   Web of Science ®Google Scholar
• Etou M, Fukushima S, Sasaki T, et al. Super short interval multi-pass rolling process for ultrafine-grained hot strip. ISIJ Int. 2008;48(8):1142–1147. doi: 10.2355/isijinternational.48.1142
   Web of Science ®Google Scholar
• Akama D, Tsuchiyama T, Takaki S. Evaluation of dislocation density in Cold-Worked iron as measured via X-Ray diffractometry. J Soc Mater Sci Jpn. 2017;66(7):522–527. in Japanese) doi: 10.2472/jsms.66.522
   Google Scholar
• Tanaka Y, Takaki S, Tsuchiyama T, et al. Effect of grain size on the yield stress of cold worked iron. ISIJ Int. 2018;58(10):1927–1933. doi: 10.2355/isijinternational.ISIJINT-2018-371
   Web of Science ®Google Scholar