An experimental investigation on the explosive plugging of similar and dissimilar steel tubes

References

• Yun J, Kim Y, Yu S. 2020 Interactive heat transfer characteristics of 5 kW class shell-and-tube methane steam reformer with intermediate temperature heat source. Int J Hydrogen Energy. 2020;45(41):21767–21778. doi: 10.1016/j.ijhydene.2020.05.152
   Web of Science ®Google Scholar
• Gong Y, Yang XL, Wang SH, et al. Failure analysis on leaked jacket pipe of double-pipe heat exchanger in high-pressure polyethylene facility. Int J Press Vessels Pip. 2020;187:104166. doi: 10.1016/j.ijpvp.2020.104166
   Web of Science ®Google Scholar
• Mohanty DK, Singru PM. Use of C-factor for monitoring of fouling in a shell and tube heat exchanger. Energy J. 2011;36(5):2899–2904. doi: 10.1016/j.energy.2011.02.032
   Google Scholar
• Ayodeji A, Liu YK. PWR heat exchanger tube defects: trends, signatures and diagnostic techniques. Prog Nucl Energy. 2019;112:171–184. doi: 10.1016/j.pnucene.2018.12.017
   Web of Science ®Google Scholar
• Thekkuden DT, Mourad AHI, Bouzid AH. Failures and leak inspection techniques of tube-to-tube sheet joints. A review. Eng Fail Anal. 2021;130:105798. doi: 10.1016/j.engfailanal.2021.105798
   Web of Science ®Google Scholar
• Le Gloannec B, Doyen O, Pouvreau C, et al. Numerical simulation of resistance upset welding in rod to tube configuration with contact resistance determination. J Mater Process Technol. 2016;238:409–422. doi: 10.1016/j.jmatprotec.2016.07.042
   Web of Science ®Google Scholar
• Kimchi M, Shao H, Cheng W, et al. Magnetic pulse welding aluminium tubes to steel bars. Weld World. 2004;48(3–4):19–22. doi: 10.1007/BF03266422
   Google Scholar
• Baoxiang R, Gang T, Peng W, et al. Study on weldability window and interface morphology of steel tube and tungsten alloy rod welded by explosive welding. Int J Refract Met Hard Mater. 2019;84:105005. doi: 10.1016/j.ijrmhm.2019.105005
   Web of Science ®Google Scholar
• Zhou Q, Feng J, Chen P. Numerical and experimental studies on the explosive welding of tungsten foil to copper. Materials. 2017;10(9):984. doi: 10.3390/ma10090984
   PubMed Web of Science ®Google Scholar
• Khayyer A, Gotoh H, Shimizu Y. On systematic development of FSI solvers in the context of particle methods. J Hydrodyn. 2022;34(3):395–407. doi: 10.1007/s42241-022-0042-3
   Web of Science ®Google Scholar
• Liu MB, Zhang ZL, Feng D. A density-adaptive SPH method with kernel gradient correction for modeling explosive welding. Comput Mech. 2017;60(3):513–529. doi: 10.1007/s00466-017-1420-5
   Web of Science ®Google Scholar
• Zhang ZL, Liu MB. Numerical studies on explosive welding with ANFO by using a density adaptive SPH method. J Manuf Processes. 2019;41:208–220. doi: 10.1016/j.jmapro.2019.03.039
   Web of Science ®Google Scholar
• Nassiri A, Kinsey B. Numerical studies on high-velocity impact welding: smoothed particle hydrodynamics (SPH) and arbitrary Lagrangian–Eulerian (ALE). J Manufac Process. 2016;24:376–381. doi: 10.1016/j.jmapro.2016.06.017
   Web of Science ®Google Scholar
• Luo M, Khayyer A, Lin P. Particle methods in ocean and coastal engineering. Appl Ocean Res. 2021;114:102734. doi: 10.1016/j.apor.2021.102734
   Web of Science ®Google Scholar
• Zhang ZL, Liu MB. Smoothed particle hydrodynamics with kernel gradient correction for modeling high velocity impact in two-and three-dimensional spaces. Eng Anal Bound Elem. 2017;83:141–157. doi: 10.1016/j.enganabound.2017.07.015
   Web of Science ®Google Scholar
• Kumar P, Ghosh SK, Saravanan S, et al. Experimental and simulation studies on explosive welding of AZ31B-Al 5052 alloys. Int J Adv Manuf Technol. 2023;127(5-6):2387–2399. doi: 10.1007/s00170-023-11684-8
   Web of Science ®Google Scholar
• Saravanan S, Raghukandan K, Sivagurumanikandan N. Studies on metallurgical and mechanical properties of laser welded dissimilar grade steels. J Braz Soc Mech Sci Eng. 2017;39(9):3491–3498. doi: 10.1007/s40430-016-0658-8
   Web of Science ®Google Scholar
• Demir B, Ali KB, Gürün H, et al. An investigation of the shearing performance and sheared surface characterisation of ultra-strength DP steel-Al explosive welded plate composite. Int J Adv Manuf Technol. 2023;126(5–6):1845–1861. doi: 10.1007/s00170-023-11231-5
   Web of Science ®Google Scholar
• Habib MA, Keno H, Uchida R, et al. Cladding of titanium and magnesium alloy plates using energy-controlled underwater three layer explosive welding. J Mater Process Technol. 2015;217:310–316. doi: 10.1016/j.jmatprotec.2014.11.032
   Web of Science ®Google Scholar
• Zhang ZL, Feng DL, Liu MB. Investigation of explosive welding through whole process modeling using a density adaptive SPH method. J Manuf Process. 2018;35:169–189. doi: 10.1016/j.jmapro.2018.08.004
   Web of Science ®Google Scholar
• Liu GR, Liu MB. Smoothed particle hydrodynamics: a meshfree particle method. Singapore: World Scientific; 2003.
   Google Scholar
• Elango E, Saravanan S, Raghukandan K. Experimental and numerical studies on aluminum-stainless steel explosive cladding. J Cent South Univ. 2020;27(6):1742–1753. doi: 10.1007/s11771-020-4404-0
   Web of Science ®Google Scholar
• Chu Q, Zhang M, Li J, et al. Experimental and numerical investigation of microstructure and mechanical behavior of titanium/steel interfaces prepared by explosive welding. Mater Sci Engg A. 2017;689:323–331. doi: 10.1016/j.msea.2017.02.075
   Web of Science ®Google Scholar
• Rakvåg KG, Børvik T, Hopperstad OS. A numerical study on the deformation and fracture modes of steel projectiles during Taylor bar impact tests. Int J Solids Struct. 2014;51(3–4):808–821. doi: 10.1016/j.ijsolstr.2013.11.008
   Web of Science ®Google Scholar
• Kumar CWD, Saravanan S, Raghukandan K. Numerical and experimental investigation on aluminum 6061-V-grooved stainless steel 304 explosive cladding. Defence Technol. 2022;18(2):249–260. doi: 10.1016/j.dt.2020.11.010
   Web of Science ®Google Scholar
• Zhou Q, Lu H, Zhang Y, et al. Intermetallic reaction of the bonding interface of TA2/Q235 explosive welding composite. Metals. 2023;13(3):571. doi: 10.3390/met13030571
   Web of Science ®Google Scholar
• Yang X, Shi CG, Ge YH, et al. Comparison of microstructure and mechanical properties of titanium/steel composite plates by two manufacturing processes. J Iron Steel Res Int. 2018;25(3):347–356. doi: 10.1007/s42243-018-0038-y
   Web of Science ®Google Scholar
• Carvalho G, Galvão I, Mendes R, et al. Explosive welding of aluminium to stainless steel using carbon steel and niobium interlayers. J Mater Process Technol. 2020;283:116707. doi: 10.1016/j.jmatprotec.2020.116707
   Web of Science ®Google Scholar
• Zhang H, Jiao KX, Zhang JL, et al. Microstructure and mechanical properties investigations of copper-steel composite fabricated by explosive welding. Mater Sci Eng A. 2018;731:278–287. doi: 10.1016/j.msea.2018.06.051
   Web of Science ®Google Scholar
• Liu K, Chen P, Ran C, et al. Investigation on the interfacial microstructure and mechanical properties of the W-Cu joints fabricated by hot explosive welding. J Mater Process Technol. 2022;300:117400. doi: 10.1016/j.jmatprotec.2021.117400
   Web of Science ®Google Scholar
• Acarer M, Gülenç B, Findik F. The influence of some factors on steel/steel bonding quality on there characteristics of explosive welding joints. J Mater Sci. 2004;39(21):6457–6466. doi: 10.1023/B:JMSC.0000044883.33007.20
   Web of Science ®Google Scholar
• Yang M, Xu J, Chen D, et al. Understanding interface evolution during explosive welding of silver foil and Q235 substrate through experimental observation coupled with simulation. Appl Surf Sci. 2021;566:150703. doi: 10.1016/j.apsusc.2021.150703
   Web of Science ®Google Scholar
• Bi ZX, Li XJ, Yang K, et al. Experimental and numerical studies of titanium foil/steel explosively welded clad plate. Defence Technol. 2023;25:192–202. doi: 10.1016/j.dt.2022.05.001
   Web of Science ®Google Scholar
• Somasundaram S, Krishnamurthy R, Kazuyuki H. Effect of process parameters on microstructural and mechanical properties of Ti − SS 304L explosive cladding. J Cent South Univ. 2017;24(6):1245–1251. doi: 10.1007/s11771-017-3528-3
   Web of Science ®Google Scholar
• Luo N, Liang H, Sun X, et al. Research on the interfacial microstructure of three-layered stainless steel/Ti/low-carbon steel composite prepared by explosive welding. Compos Interfaces. 2021;28(6):609–624. doi: 10.1080/09276440.2020.1794751
   Web of Science ®Google Scholar
• Saravanan S. Effect of different interlayer on Al 5052/SS 316 explosive cladding. Weld Int. 2022;36(10):579–588. doi: 10.1080/09507116.2022.2125854
   Google Scholar
• Zhao H, Zhao C, Yang Y, et al. Study on the microstructure and mechanical properties of a Ti/Mg alloy clad plate produced by explosive welding. Metals. 2022;12(3):399. doi: 10.3390/met12030399
   Web of Science ®Google Scholar