Rotary friction welding of X70 steel to duplex stainless steel

References

• Kalaiselvan K, Dinaharan I, Murugan N. Routes for the joining of metal matrix composite materials. In: Dermot B, editor. Encyclopedia of materials: composites. Oxford: Elsevier; 2021. p. 652–670. doi: 10.1016/b978-0-12-803581-8.11899-5
   Google Scholar
• Ajay V, Babu NK, Ashfaq M, et al. A review on rotary and linear friction welding of Inconel alloys. Trans Indian Inst Met. 2021;74(11):2583–2598. doi: 10.1007/s12666-021-02345-z
   Web of Science ®Google Scholar
• Attallah MM, Preuss M, Bray SE. Friction welding of titanium alloys: addressing the structural integrity issues through process optimization. In Proceedings of the 1st International Joint Symposium on Joining and Welding, Osaka; 2013.
   Google Scholar
• Liu H, Hu, Y. Welding. In: Francisca GC, editor. Encyclopedia of materials: metals and alloys. Amsterdam: Elsevier Science; 2022. p. 2492.
   Google Scholar
• Rostamiyan Y, Zaferani M. Fabrication of polyethylene-based surface composite reinforced by carbon nano-tube and nano-clay through friction stir processing. J Mater Process Tech. 2014;233(4):580–587.
   Google Scholar
• Maji P, Karmakar R, Nath RK, et al. An overview on friction stir welding/processing tools. Mater Today Proc. 2022;58:57–64. doi: 10.1016/j.matpr.2022.01.009
   Google Scholar
• Szwajka K, Zielińska-Szwajk J, Trzepieciński T. Microstructure and mechanical properties of solid-state rotary friction welded Inconel 713C and 32CrMo4 steel joints used in a turbocharger rotor. Materials. 2023;16(6):2273. doi: 10.3390/ma16062273
   PubMed Web of Science ®Google Scholar
• Kautz DD. Fundamentals of friction welding, welding fundamentals and processes. In: T Lienert, T Siewert, S Babu, V Acoff, editors. ASM handbook. Vol. 06A. Los Alamos: ASM International; 2011. p. 179–185.
   Google Scholar
• Cazes R. Procédés de soudage: principes généraux et critères de choix. Tech Ing Génie méc. 1995;B7700:1–6.
   Google Scholar
• Maalekian M. Friction welding – critical assessment of literature. Sci Technol Weld Join. 2007;12(8):738–759. doi: 10.1179/174329307X249333
   Web of Science ®Google Scholar
• Rombaut P, Wim DW, Koenraad F. Friction welding of steel to ceramic. Sustain Const Des. 2011;2(3):448–457.
   Google Scholar
• Dawood AB, Butt SI, Hussain G, et al. Thermal model of rotary friction welding for similar and dissimilar metals. Metals. 2017;7(6):224. doi: 10.3390/met7060224
   Web of Science ®Google Scholar
• Senthil Murugan S, Sathiya P, Noorul Haq A. Rotary friction welding and dissimilar metal joining of aluminium and stainless steel alloys. Ann Dunarea Jos Univ Galat. 2021;32:85–92.
   Google Scholar
• Selvaraj R, Shanmugam K, Selvaraj P, et al. Optimization of process parameters of rotary friction welding of low alloy steel tubes using response surface methodology. Forces Mech. 2023;10:100175. doi: 10.1016/j.finmec.2023.100175
   Google Scholar
• Mattie AA, Ezdeen SY, Khidhir GI. Optimization of parameters in rotary friction welding process of dissimilar austenitic and ferritic stainless steel using finite element analysis. Adv Mech Eng. 2023;15(7):1–16. doi: 10.1177/16878132231186015
   Web of Science ®Google Scholar
• Khalfallah F, Boumerzoug Z, Rajakumar S, et al. Optimization by RSM on rotary friction welding of AA1100 aluminum alloy and mild steel. Int Rev Appl Sci Eng. 2020;11(1):34–42.
   Google Scholar
• Heddar D, Boumerzoug Z. Microstructures and thermomechanical properties of welded steel to copper by rotary friction process. Int J Mod Manuf Technol. 2020;7(2):43–48.
   Google Scholar
• Khan WN, Chhibber R. Experimental investigation on dissimilar weld between super duplex stainless steel 2507 and API X70 pipeline steel. J Mater Des Appl. 2021;235(8):1827–1840.
   Google Scholar
• Alves EP, An CY, Neto FN, et al. Experimental determination of temperature during rotary friction welding of dissimilar materials. Front Aerosp Eng. 2012;1(1):20–26.
   Google Scholar
• Thien ND, Quang DL, Van TP, et al. A welding temperature determination method of low carbon steel and stainless steel welded joint by rotary friction welding process, 3rd International Conference on Green Technology and Sustainable Development (GTSD), Kaohsiung Taiwan; 2016. p. 206–211.
   Google Scholar
• Salih FI, Dawood AS, Hamid AA. Review on the thermal characterizations of rotary friction welding. Al-Rafidain Eng J. 2022;27(1):110–115.
   Google Scholar
• Zhang S, Xie F, Wu X, et al. The microstructure evolution and mechanical properties of rotary friction welded duplex stainless steel pipe. Materials. 2023;16(9):3569. doi: 10.3390/ma16093569
   PubMed Web of Science ®Google Scholar
• Sasmito A, Ilman MN, Iswanto PT, et al. Effect of rotational speed on static and fatigue properties of rotary friction welded dissimilar AA7075/AA5083 aluminium alloy joints. Metals. 2022;12(1):99. doi: 10.3390/met12010099
   Web of Science ®Google Scholar
• Winiczenko R. Effect of friction welding parameters on the tensile strength and microstructural properties of dissimilar AISI 1020-ASTM A536 joints. Int J Adv Manuf Tech. 2016;84:941–955.
   Web of Science ®Google Scholar
• Boumerzoug Z, Priymak E, Stepanchukova A, et al. Texture of rotary-friction-welded from dissimilar medium carbon steels. World J Condens Matter Phys. 2020;10(04):178–190. doi: 10.4236/wjcmp.2020.104011
   Google Scholar