ECSC research into weldability carried out in the last ten years

References

• 1979 . ‘Ten years of ECSC activity in the weldability research field.’ . Rivista Italiana della Saldatura , : 278 (6) 346
   Google Scholar
• Girardi , U . 1980 . ‘Ten years of ECSC research in the field of weldability.’ . Soudage et Techniques Connexes , November/December : 404
   Google Scholar
• Girardi , U . 1980 . ‘Technical steel research - properties of steel in use - ten years of ECSC activity in research on weldability.’ Publication EUR 6185 EN-, (10)
   Google Scholar
• Suzuki , M . 1982 . ‘Weldability of modern structural steels.’ . Welding in the World , : 121 Houdremont Lecture 7/8/1982
   Google Scholar
• . ‘Improved welding productivity with modern steels.’ . Papers publ by the Commission of the European Communities . Luxemburg. 9/10 ,
   Google Scholar
• ‘Note on the carbon equivalent.’ . Document , IX 288 – 68 . IIW
   Google Scholar
• Ito , Y and Bessyo , K . ‘Weld crackability formula of high strength steels and determination of preheating conditions to avoid weld cracking in steel constructions.’ , Vol. IX , 576 – 63 . Sumitomo publication . Document IIW
   Google Scholar
• Ito , Y and Bessyo , K . ‘A prediction of welding procedure to avoid heat affected zone cracking.’ . Document , IX 631 – 69 . IIW
   Google Scholar
• 1974 . ‘Technical steel research - properties of steel in use - critical examination of the weldability criteria of dispersoid steels.’ Vol. 1 , (10), Publication EUR 5159, Project a
   Google Scholar
• December 1974 . ‘Technical steel research - properties of steel in use - metal construction steels - weldability of steels.’ , December , Publication EUR 5185 IRSID .
   Google Scholar
• Marquet , F . 1977 . ‘Evaluation of cold cracking susceptibilities - investigations by steelmakers from Benelux.’ . Document , IX : 1031 – 77 . IIW, summarising the final report of ECSC research agreement 6210/93/2/201 (Part 2), Publication EUR 5773, CRM
   Google Scholar
• 1982 . ‘Methods of cold cracking on implants.’ . AFNOR-NF-A-89.100 , May
   Google Scholar
• Bufalini , P . 1980 . ‘Technical steel research - properties and service performance - weldability of new structural steels.’ Publication EUR 6339 EN CSM
   Google Scholar
• Debiez , S and Gerard , P . 1983 . ‘Technical steel research - properties and service performance - practice and significance of the cold cracking implant test.’ Publication EUR 8265 FR, IS
   Google Scholar
• Bufalini , P . 1984 . ‘Accelerated cooling after control rolling of pipeline plates: influence of process conditions on microstructure and mechanical properties.’ . Finsider Technical Bulletin , special number 86
   Google Scholar
• Abrigo , J , Duquaire , B and Jeanneau , M . 1980 . ‘The accelerated cooling of plates directly from the rolling mill.’ . Revue de Métallurgie CIT , October : 807
   Google Scholar
• Devillers , L , Kaplan , D and Moussy , F . Technical steel research - properties and service performance - weldability of steels hardened and tempered by direct quenching.’ , Publication EUR 9298 FR IRSID .
   Google Scholar
• Devillers , L and Kaplan , D . ‘Technical steel research - properties and service performance - properties of use of assemblies obtained by the electron beam welding of heavy gauge structural steel plates.’ , Publication EUR 10747 FR IRSID .
   Google Scholar
• Florian , W . ‘Untersuchungen von UP-Schweissverbindungen höherfester Baustähle des Typs StE 460.’ , BAM Berlin : shortly to be published by CEC. . final ECSC research report Contract No. 7210-KA/108
   Google Scholar
• Marquet , F . 1981 . ‘Technical steel research - properties and service performance - research into basic knowledge in order to improve the welding of steels under high calorific input.’ , CRM. . Publication EUR 7295 FR
   Google Scholar
• Devillers , L and Riboud , P V . 1982 . ‘Technical steel research - properties and service performance - metallurgy and mechanical properties of the molten metal in submerged-arc welding.’ , IRSID. . Publication EUR 7749 F
   Google Scholar
• Devillers , L . 1986 . ‘Technical steel research - properties and service performance - metallurgical study of the molten metal in automatic welding under solid flux.’ , IRSID. . Publication EUR 10065F
   Google Scholar
• Berkhout , C. E. and Vuik , J . ‘Technical steel research - properties and service performance - metallurgy and mechanical properties of multipass submerged-arc weld metal in C-Mn and low alloy constructional steel.’ , Publication EUR 10888 EN TNO .
   Google Scholar
• Aristotile , R . ‘Submerged-arc welding: development of high productivity processes with techniques up to six wires and assessment of the joint properties with traditional and fracture mechanics tests.’ , shortly to be published by CEC CSM . Final ECSC research report Contract 7210-KA/407
   Google Scholar
• De Vito , A . 1987 . ‘Technical steel research - properties and service performance - development of the two-wire high current MIG process for pipe welding.’ , NIT. . Publication EUR 9627 It
   Google Scholar
• Gaillard , R and Cassé , A . ‘Improving productivity by the addition of metal powder during welding by the powder flux arc welding process.’ , shortly to be published by CEC. . Final ECSC research report Contract 7210-KA/311
   Google Scholar
• Bailey , N and Middleton , K W . ‘Improved productivity through metal powder additions to submerged-arc welds.’ , shortly to be published by CEC. . Final ECSC research report Contract 7210-KA/808
   Google Scholar
• Devillers , L . ‘Metallurgical aspects and mechanical properties of heavy gauge joints welded by the vertical electroslag process with consumable wire guide.’ Final report of the IRSID part of the ECSC research, Contract 7210-KA/312, shortly to be published by CEC
   Google Scholar
• Bourges , Ph . ‘Heavy gauge joints welded by the consumable wire guide process.’ Final report of the CL part of the ECSC research, Contract 7210-KA/312, shortly to be completed and subsequently published by CEC
   Google Scholar
• Gaillard , R and Bryckaert , D . 1979 . ‘Technical steel research - properties of steel in use - weldability and non-destructive testing problems raised by electron beam welding.’ Publication EUR 6286 F
   Google Scholar
• Bourges , Ph . ‘Properties of use of assemblies obtained by the electron beam welding of heavy gauge structural steel plates.’ Final report of the CL part of the ECSC research, Contract 7210-KA/310 CL, shortly to be published by CEC
   Google Scholar
• Debiez , S . 1984 . ‘Technical steel research - properties of steel in use - search for greater economy in the welding of high strength steels.’ Publication EUR 8558 F IS
   Google Scholar
• Bragard , A , Marquet , F and Defourny , J . 1985 . ‘Technical steel research - properties of steel in use - the risk of underbead cold cracking and the welding of branches on to gas pipes.’ Publication EUR 9569 F, CRM
   Google Scholar
• Defourny , J and Bragard , A . ‘Choice of preheating conditions in the case of the shielded semi-automatic or automatic welding of structural steels.’ Final report of the ECSC research, Contract 7210-KA/208, shortly to be published by CEC, CRM
   Google Scholar
• Defourny , J , Bragard , A and Lamberigts , M . 1980 . ‘Technical steel research - properties of steel in use - underwater welding.’ Publication EUR 6426 FR, CRM
   Google Scholar
• Gooch , T. G. ‘An investigation of the properties of welds made underwater.’ Final report of the ECSC research, Contract 7210-KA/801, shortly to be published by CEC, TWI
   Google Scholar
• Jones , S. B. and Russell , J D . 1983 . ‘Technical steel research - properties and service performance - a survey of the present state of automation and advanced technology fusion welding in Japan and the European Community.’ Publication EUR 8679 EN, TWI
   Google Scholar
• Bucklow , I. A. 1982 . ‘Technical steel research - properties and service performance - new techniques for joining steel.’ Publication EUR 7587 EN, TWI
   Google Scholar
• Bucklow , I. A. 1983 . ‘Technical steel research - properties and service performance - new techniques for joining steel.’ Publication EUR 8555 EN, TWI
   Google Scholar
• ‘Economical methods of preventing fusion zone cracking when welding modern C-Mn steels.’ ECSC research contract 7210-KA/315, in progress at the IS
   Google Scholar
• ‘Economic avoidance of weld metal hydrogen cracking when welding modern C-Mn steels.’ ECSC research contract 7210-KA/811, in progress at TWI
   Google Scholar
• ‘Metallurgical aspects of the assembly of thin plates by laser-CO2.’ . ECSC research contract 7210-KA/314, in progress at IRSID and CL .
   Google Scholar
• Sofia , ed. ‘Stress relieving heat treatments of welded steel constructions.’ . Proc of IIW int conf 6–7 July 1987 . Oxford : Pergamon Press .
   Google Scholar