Advanced search
Publication Cover
International Journal of Computer Integrated Manufacturing Volume 18, 2005 - Issue 7: Next generation Manufacturing (NGM)
Submit an article Journal homepage
1,148
Views
106
CrossRef citations to date
0
Altmetric
Original Articles

Next-generation manufacturing systems: key research issues in developing and integrating reconfigurable and intelligent machines

A. Molina Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
,
C. A. Rodriguez Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, MexicoCorrespondence[email protected]
,
H. Ahuett Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
,
J. A. Cortés Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
,
M. Ramírez Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
,
G. Jiménez Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
&
S. Martinez Instituto Tecnológico y de Estudios Superiores de Monterrey, Ave. Eugenio Garza Sada 2501 Sur, Monterrey, N.L., 64849, Mexico
 show all
Pages 525-536 | Published online: 19 Feb 2007

References

Next-Generation manufacturing systems and reconfigurable machine tools

  • http://erc.engin.umich.edu/
  • Iacocca Institute . 1991 . 21st Century Manufacturing Enterprise Strategy: An Industry-Led View , Vol. 1 , Lehigh University .
  • 24–26 January 1994 . “ Intelligent Manufacturing Systems, A program for international cooperation in advanced manufacturing ” . In Final Report of the International Steering Committee, adopted at ISC6 24–26 January , Hawaii
  • Koren , Y. , Heisel , U. , Jovane , F. , Moriwaki , T. , Pritchow , G. , Van Brussel , H. and Ulsoy , A. G. 1999 . Reconfigurable manufacturing systems . CIRP Annals ,
  • Lei , M. , Yang , X. , Tseng , M. and Yang , S. 1998 . Design and intelligent machine center: strategy and practice . J. Mechatronics , 8 : 275 – 281 .
  • Mehrabi , M. G. , Ulsoy , A. G. and Koren , Y. 2000 . Reconfigurable manufacturing systems: key to future manufacturing . J. Intell. Mfg , 11 : 403 – 419 .
  • Molina , A. , Ponguta , S. , Bremer , C. F. and Eversheim , W. 1998 . Framework for global virtual business . Agility Global Comp. , 2 : 56 – 69 .
  • National Research Council (Commission on Engineering and Technical Systems), Visionary Manufacturing Challenger for 2020, National Academy Press, 1998. Available online at: http://search.nap.edu/readingroom/books/visionary/index.html
  • Svensson , C. and Barfod , A. 2002 . Limits and opportunities in mass customization for built to order SMEs . Comput. Ind. , 49 : 77 – 89 .

Intelligence in machines

  • Albus , J. S. 1991 . Outline for a theory of intelligence . IEEE Trans. Systems, Man Cybernetics , 21 : 473 – 509 .
  • Burns , R. 1997 . Intelligent manufacturing . Aircraft Engng Aerosp. Technol. , 69 : 440 – 446 .
  • De Silva , C. 2000 . Intelligent Machines: Myths and Realities , Edited by: de Silva , C. W. CRC Press . First edition
  • Eicker , P. “ An approaching golden age of intelligent machines ” . In Robotics and Automation, Proceedings 1995 IEEE International Conference, 1995 21 – 27 .
  • Hunt , E. 1995 . The role of intelligence in modern society . Am. Sci , JulyAugust : 356 – 367 .
  • Messina , E. , Meystel , A. and Reeker , L. Measuring performance and intelligence of intelligent systems . Proceedings of PERMIS' 2001 .
  • Meystel , A. and Messina , E. 2000 . The challenges of intelligent systems . Proceedings of the IEEE International Symposium on Intelligent Control . 2000 , Patras, Greece.
  • Pashchenko , F. F. and Chernyshov , K. R. 1999 . A concept of knowledge-based identification of nonlinear systems . Comput. Ind. , 39 : 191 – 197 .
  • Rzevski , G. 1995 . Mechatronics Designing Intelligent Machines, Volume 1, Perception – Cognition and Execution , London : Butterworth Heineman . in Association with the Open University
  • Saridis , G. 1988 . On the theory of intelligent machines: a survey . Proceedings of the 27th Conference on Decision and Control . December 1988 , Austin, Texas.
  • Wang , L. 2001 . Integrated design-to-control approach for holonic manufacturing systems . Robotics Comput. Integrated Mfg , 17 : 159 – 167 .

Machine tool and tooling design

  • Acherkan , N. S. 2000 . Machine Tool Design , University Press .
  • Chick , S. E. , Olsen , T. L. , Sethuraman , K. , Stecke , K. E. and White , C. C. 2000 . A descriptive multi-attribute model for reconfigurable machining system selection examining buyer-supplier relationship . Int. J. Agile Mgmt Systems , 2 : 33 – 48 .
  • Ding , Y. , Ceglarek , D. and Shi , J. 2002 . Fault diagnosis of multistage manufacturing processes by using state space approach . ASME J. Mfg Sci. Engng , 124 : 313 – 322 .
  • Hart , A. J. , Slocum , A. and Willoughby , P. 2004 . Kinematic coupling interchangeability . Precision Engng , 28 : 1 – 15 .
  • Her , I. and Chang , J. C. 1994 . A linear scheme for the displacement analysis of micropositioning stages with flexure hinges . ASME J. Mach. Des. , 166 : 770 – 776 .
  • Huang , Q. , Zhou , N. and Shi , J. 2000 . Stream of variation modeling and diagnosis of multi-station machining processes . Proceedings of the 2000 ASME International Mechanical Engineering Congress and Exposition . 2000 . pp. 81 – 88 .
  • Maier-Speredelozzi , V. and Hu , J. S. 2002 . Selecting manufacturing system configuration based on performance using AHP. Trans. NAMRI West Lafayette, Indiana
  • Mehrabi , M. G. , Ulsoy , A. G. and Koren , Y. 2002 . Reconfigurable manufacturing systems and their enabling technologies . Int. J. Mfg Technol. Mgmt , 1 : 113 – 130 .
  • Moon , S. K. , Moon , Y. , Kota , S. and Landers , R. 2001 . Screw theory based methodology for design and error compensation of machine tools . Proceedings of DETC 2001, ASME 2001 Design Engineering Technical Conferences . September 2001 , Pittsburgh, PA.
  • Tilbury , D. M. and Kota , S. 1999 . Integrated machine and control design for reconfigurable machine tools . Proceedings of the IEEE/ASME Conference on Advanced Intelligent Mechatronics . 1999 , Atlanta, GA. pp. 629 – 634 .
  • Walczyk , D. , Lakshmikanthan , J. and Kirk , D. 1998 . Development of a reconfigurable tools for forming aircraft body panels . J. Mfg Syst. , 17 : 287 – 296 .
  • Yigit , A. S. and Ulsoy , A. G. 2002 . Dynamic stiffness evaluation for reconfigurable machine tools including weakly non-linear joint characteristics . Proc. IMechE, Part B: J. Engng Mf , 216 : 87 – 101 .

Open machine tool controllers

  • Adolfsson , J. , Ng , A. , Olofsgard , P. , Moore , P. , Pu , J. and Wong , C. 2002 . Design and simulation of component-based manufacturing machine systems . Mechatronics , 12 : 1239 – 1258 .
  • Christensen , J. 2002 . Tabur search. IEC 61499 Architecture, Engineering Methodologies and Software Tools, Knowledge and Technology Integration in Production and Services , 221 – 228 . Kluwer Academic Publishers .
  • Donohoe , P. 2000 . Software product lines: experience and research directions . Proceedings of the First Software Product Lines Conference (SPLC1) . August 28–31 2000 , Denver, USA.
  • Erol , N. , Altintas , Y. and Ito , R. 2000 . Open system architecture modular tool kit for motion and machining process control . IEEE/ASME Transactions on Mechatronics , 5 : 281 – 291 .
  • Erkorkmaz , K. and Altintas , Y. 2001a . High speed CNC system design. Part I: jerk limited trajectory generation and quintic spline interpolation . Int. J. Mach. Tools Mf , 41 : 1323 – 1345 .
  • Erkorkmaz , K. and Altintas , Y. 2001b . High speed CNC system design. Part II: modeling and identification of feed drives . Int. J. Mach. Tools Mf , 41 : 1487 – 1509 .
  • Jiménez , G. and Batory , D. 2002 . Software product-line evolution and machine tool controllers . ANIEI 1st International Congress on Informatics and Computing . October 23–25 2002 , Mexico.
  • Jiménez , G. and Batory , D. 2003 . Evolving product lines of object-oriented real-time systems . Proceedings of WORDS-2003, 8th Workshop on Object-oriented Real-Time Dependable Systems . January 15–17 2003 , Mexico.
  • Koren , Y. 1997 . Control of machine tools . J. Mfg Sci. Engng , 119 : 749 – 755 .
  • Marzi , R. and John , P. 2002 . Supporting fault diagnosis through a multi-agent architecture . J. Engng Mf , 216 : 627–631
  • Michaloski , J. , Birla , S. , Yen , C. J. , Igou , R. and Weinert , G. 200032. . An open system framework for component-based CNC machines . ACM Comput. Surveys ,
  • Mori , M. , Yamazaki , K. , Fujishima , M. , Liu , J. and Furukawa , N. 2001 . A study on development of an open servo system for intelligent control of a CNC machine tool . CIRP Annals – Mf Technol. , 50 : 247 – 250 .
  • http://www.omac.org (http://www.arcweb.com/omac)
  • http://www.osaca.org
  • OSE Consortium: OSEC – II Project Technical Report.
  • Pritschow , G. , Altintas , Y. , Jovane , F. , Koren , Y. , Mitsuishi , M. , Takata , S. , Van Brussel , H. , Weck , M. and Yamazaki , K. 2001 . Open controller architecture–past, present and future . CIRP Annals – Mfg Technol. , 50 : 463 – 470 .
  • Rao , S. B. 1997 . Metal cutting machine tool design – a review . J. Mfg Sci. Engng , 119 : 713 – 716 .
  • Ramírez , M. 89 October 2001 . Software based computer numerical controller for low cost automation in small and medium sized metal-processing enterprises in developing countries. Memories of the VI IFAC Symposium on Cost Oriented Automation 89 October , Berlin, , Germany
  • Srinivasan , K. and Tsao , T. C. 1997 . Machine tool feed drives and their control – a survey of the state of the art . J. Mfg Sci. Engng , 119 : 743 – 748 .
  • Svahnberg , M. , van Gurp , J. and Bosch , J. On the notion of variability in software product lines . Proceedings of The Working IEEE/IFIO Conference on Software Architecture (WICSA 2001) . The Netherlands2001.
  • Tsutsumi , M. , Ohtomo , S. , Okazaki , Y. , Sakai , K. , Yamazaki , K. and Ge , D. 1995 . Mathematical model of feed drive mechanical system and friction for CNC machine tools . J. Jap. Soc. Precision Engng , 61 : 1458 – 1462 .
  • Yamazaki , K. , Hanaki , Y. , Mori , M. and Tezuka , K. 1997 . Autonomously proficient CNC controller for high-performance machine tools based on an open architecture concept . CIRP Annals – Mfg Technol. , 46 : 275 – 278 .
  • Yao , B. , Al-Majed , M. and Tomizuka , M. 1997 . High-performance robust motion control of machine tools: an asaptive robust control approach and comparative experiments . IEEE/ASME Trans. Mechatronics , 2 : 63 – 76 .

Manufacturing process modelling and simulation

  • Ahman , K. F. , Kappor , S. G. , DeVor , R. E. and Lazoglu , I. 1997 . Machining process modeling: a review . J. Mfg Sci, Engng , 119 : 655 – 661 .
  • Ermer , D. S. 1997 . A century of optimizing machining operations . J. Mfg Sci. Engng , 119 : 817 – 822 .
  • Haber , R. E. , Alique , A. , Ros , S. and Haber , R. H. 2002 . Application of Knowledge-based Systems for Supervision and Control of Machining Processes, Handbook of Software Engineering and Knowledge Engineering Vol. 2 Emerging Technologies, , Edited by: Chang , S. K. 673 – 709 . World Scientific .
  • McKenzie , W. M. , Ko , P. , Cdvitkovic , R. and Ringler , M. 2001 . Towards a model predicting cutting forces and surface quality in routing layered boards . Wood Science and Technology , 35 : 563 – 569 .
  • Kang , M. , Lee , S. -K. and Ko , S. -L. 2002 . Optimization of cutting conditions using enhanced Z map model . CIRP Annals – Mfg Technol. , 51 : 429
  • Kannatey-Asibu , E. 1997 . Milestone developments in welding and joining processes . J. Mfg Sci. Engng , 119 : 801 – 810 .
  • Kojima , T. , Sekiguchi , H. , Kobayashi , H. , Nakahara , S. and Ohtani , S. 2000 . An expert system of machining operation planning in internet environment . J. Mater. Processing Technol. , 107 : 160 – 166 .
  • Kovacevic , R. , Hashish , M. , Mohan , R. , Ramulu , M. , Kim , T. J. and Geskin , E. S. 1997 . State of the art of research and development in abrasive waterjet machining . J. Mfg Sci. Engng , 119 : 776 – 785 .
  • Lanzetta , M. 2001 . A new flexible high-resolution vision sensor for tool condition monitoring . J. Mater. Processing Technol. , 119 : 73 – 82 .
  • Liao , Y. S. and Young , Y. C. 1996 . A new on-line spindle speed regulation strategy for chatter control . Int. J. Mach. Tools Mf , 36 : 651 – 660 .
  • Li , G. , Jinn , J. T. , Wu , W. T. and Oh , S. I. 2001 . Recent development and applications of three-dimensional finite element modeling in bulk forming processes . J. Mater. Processing Technol. , 113 : 40 – 45 .
  • Haas , E. , Schwarz , R. C. and Papazian , J. M. 2002 . Design and test of a reconfigurable . J. Manuf. Proc. , 4 : 77 – 86 .
  • Hansen , M. 1999 . Application examples for gas-assisted injection molded parts . Journal of Injection Molding Technology , 3 : 141 – 153 .
  • Hagashida , Y. , Yamazaki , K. and Kishinami , T . 1996 . Study on calculation error of the material removal volume in z-map based machining simulation . Journal of Japan Socieety for Precision Engineering , 62 : 1622 – 1626 .
  • Mok , S. L. , Kwong , C. K. and Lau , W. S. 1999 . Review of research in the determination of process parameters for plastic injection molding . Advances in Polymer Technology , 18 : 225 – 236 .
  • Monreal , M. and Rodriguez , C. A. 2003 . Influence of tool path strategy on the cycle time of high-speed milling . Comput. Aided Des. , 35 : 395 – 401 .
  • Ni , J. 1997 . CNC machine accuracy enhancement through real-time error compensation . J. Mfg Sci. Engng , 119 : 717 – 725 .
  • Petrova , T. and Kazmer , D. 1999 . Hybrid neural models for pressure control in injection molding . Adv. Polymer Technol. , 18 : 19 – 31 .
  • Rajurkar , K. P. and Wang , W. M. 1997 . Improvement of EDM performance with advanced monitoring and control systems . J. Mfg Sci. Engng , 119 : 770 – 775 .
  • Rao , B. C. and Shin , Y. C. 1998 . A comprehensive dynamic cutting force model for chatter prediction in turning . Int. J. Mach. Tools Mf , 39 : 1631 – 1654 .
  • Smith , S. and Dvorak , D. 1998 . Tool path strategies for high speed milling aluminum workpieces with thin webs . Mechatronics , 8 : 291 – 300 .
  • Thomas , W. , Oenoki , T. and Altan , T. 2000 . Process simulation in stamping –recent applications for product and process design . J. Mater. Processing Technol. , 98 : 232 – 243 .

Smart materials and MEMS for sensors and actuators

  • Bar-Cohen , Y. 2003 . Smart structures and materials: electroactive polymer actuators and devices (EAPAD) . Proc. SPIE , 5051
  • Bustillo , J. M. , Howe , R. T. and Muller , R. S. 1998 . Surface micromachining for microelectromechanical systems . Proc. IEEE , 86 : 1552 – 1574 .
  • Chong , C.-Y. and Srikanta , P. K. 2003 . Sensor networks: evolution, opportunities, and challenges . Proc. IEEE , 91 : 1247 – 1256 .
  • Cortes , J. and Villarreal-González , S. L. 2004 . Characterization, modeling and simulation of magnetorheological damper behavior under incremental loading . International Conference on Machine Automation (ICMA2004) . November 2004 , Osaka, Japan.
  • Kovacs , G.T.A. , Maluf , N. I. and Petersen , K. E. 1998 . Bulk micromachining of silicon . Proc. IEEE , 86 : 1536 – 1551 .
  • Latorre , L. , Bertrand , Y. and Nouet , P. 1998 . On the use of test structures for the electro-mechanical characterization of a CMOS compatible MEMS technology . Proceedings of the International Conference on Microelectronic Test Structures . 1998 . pp. 177 – 182 .
  • Wang, , M. and Fei , R. 1999 . Improvement of machining stability using a tunable-stiffness boring bar containing an electrorheological fluid . Smart Mater. Struct , 8 : 511 – 514 .

Machine tool development environment and support technologies

  • Aca , J. , Mejía , R. , Velandia , M. , García , E. , Galeano , N. , Ahuett , H. , Molina , A. and Wright , P. 2003 . Integrated product development in virtual enterprises supported by web-based applicationsProcess and Foundations for Virtual Organizations , Edited by: Camarinha-Matos , L. M. 361 – 368 . Kluwer Academic Publishers .
  • Barclay , I. and Dann , A. 2000 . Management and organisational factors in new product development (NPD) success . Concurrent Engng: Res. Appl. , 8 : 115 – 132 .
  • Bernard , A. 2000 . Rapid product development case studies and data integration analysis . Comp. Ind. , 43 : 161 – 172 .
  • Bjorke , O. and Myklebust , O. 1992 . IMPPACT: Integrated Modelling of Products and Process using Advanced Computer Technologies , Trondheim : TAPIR Publishers .
  • Boothroyd , G. and Alting , L. 1992 . Design for assembly and disassembly, Keynote Paper . Annals CIRP , 41 : 625 – 636 .
  • Bullinger , H.-J. , Warshat , J. and Fischer , D. 2000 . Rapid product development–an overview . Comput. Ind. , 42 : 99 – 108 .
  • Hanneghan , M. , Merabti , M and Coloquhoun , G. 2000 . A viewpoint analysis reference model for Concurrent Engineering . Comput. Ind. , 41 : 35 – 49 .
  • Kimura , F. 1991 . Software for product realization . International Symposium for International Trends in Manufacturing Towards the 21st Century . October 18 1991 , Berlin, Germany.
  • Kochan , D. 1995 . Intelligent production technology future-oriented vision or industry reality . Comput. Ind. , 28 : 3 – 30 .
  • Krause , F.-L. , Kimura , F. , Kjellberg , T. and Lu , S.C.-Y. 1993 . Product modelling, Keynote paper . Annals CIRP , 42 : 695 – 706 .
  • McDonough , E. F. , Kahn , K. B. and Griffin , A. 1999 . Managing communication in global product development teams . IEEE Trans. Engng Mgmt , 46 : 375 – 386 .
  • Molina , A. , Al-Ashaab , A. H. , Ellis , T.I.A. , Young , R.I.M. and Bell , R. 1995 . A review of computer aided simultaneous engineering systems . Res. Engng Des. , 7 : 38 – 63 .
  • Molina , A. and Bell , R. 1999 . A manufacturing model representation of a flexible manufacturing facility . Proc IMechE, Part B: J. Mfg Egng , 213 : 225 – 246 .
  • Molina , A. and Bell , R. 2002 . Reference models for the computer aided support of simultaneous engineering . Int. J. Comput. Integrated Mfg , 15 : 193 – 213 .
  • Ollero , A. , Morel , G. , Bernus , P. , Nofd , S. Y. , Sasiadek , J. , Beverie , S. , Erbe , H. and Goodall , R. 2002 . Milestone report of the manufacturing and instrumentation coordinating committee: Form MEMS to enterprise systems . Annual Reviews in Control , 26 : 151 – 161 .
  • Palady , P. 1995 . Failure Modes and Effects Analysis , Pt Publications .
  • Revelle , J. B. , Moran , J. W. and Cox , C. 1998 . The QFD Handbook , John Wiley .
  • Savolainen , T. , Beeckmann , D. , Groumpos , P. and Jagdev , H. 1995 . Positioning of modelling approaches, methods and tools . Comput. Ind. , 25 : 255 – 262 .
  • Tipnis , V. A. 1999 . “ Evolving issues in product life cycle design: design for sustainability ” . In Handbook of Life Cycle Engineering: Concepts, models and technologies , Edited by: Molina , A. , Kusiak , A. and Sanchez , J. 399 – 412 . London : Kluwer Academic Publishers .
  • Woodcock , A. and Scrivener , S.A.R . 1999 . “ Groupware and CSCW ” . In Handbook of Life Cycle Enginnering: Concepts, Models and Technologies , Edited by: Molina , A. , Kusiak , A. and Sanchez , J. M. 573 – 596 . London : Kluwer Academic Publishers .

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Order Reprints Request Corporate Permissions

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

Request Academic Permissions

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.

Related research

People also read lists articles that other readers of this article have read.

Recommended articles lists articles that we recommend and is powered by our AI driven recommendation engine.

Cited by lists all citing articles based on Crossref citations.
Articles with the Crossref icon will open in a new tab.