References
References
- AIAG D-12 1999 Defining Product Data Quality Technical report Automotive Industry Action Group Publications Missouri
- AIAG D-15 2001 Product Data Quality: Guidelines for the Global Automotive Industry Technical report (Automotive Industry Action Group Publications: Missouri)
- AUSAP The Australian STEP automotive project 2003 Available online at: http://www.ausdec.com.au/ausap_home.htm (accessed 2004)
- Barequet , G . 1997 . Using geometric hashing to repair CAD objects . IEEE Comput. Sci. Eng. , 4 ( 4 ) : 22 – 28 .
- Barequet G Shapiro D Tal A History-driven reconstruction of polyhedral surfaces from parallel slices in Proceedings of IEEE Visualization San Francisco CA 1996
- CADCAM-E Inc.:Data translation products 2004 Available online at: http://www.cadcam-e.com/dataconv.aspx (accessed 2004)
- Crabb HC 1998 The Virtual Engineer; 21st Century Product Development SME/ASME Press New York
- Deshpande , V , Fornasier , L , Gerteisen , EA , Hilbrink , N , Mezentsev , A , Merazzi , S and Wöhler , T . 2000 . Virtual engineering of multi-disciplinary applications and the significance of seamless accessibility of geometry data . Future Gen. Comput. Syst. , 16 : 435 – 444 .
- Elysium Inc.:CAD-Feature 2004 Available online at: http://www.elysiuminc.com/prodinfo/cadfeatureinfo.html (accessed 2004)
- Finn GA 1999 Measuring and managing quality in the engineering design process CAITA Solutions Magazine-April High Mountain Press New Mexico
- GALIA En quelques mots 2003 Available online at: http://www.galia.com/bin/p_galia.asp (accessed 2004)
- Hoffman , CM and Robert , JA . 1998 . CAD and the product master model . Computer-Aided Design , 30 ( 11 ) : 905 – 918 .
- ISO TC184-SC4: SC4 N-DOCS 2003 Available online at: http://www.tc184-sc4.org/SC4_Open/SC4_and_Working_Groups/SC4_N-DOCS/1250–1499/maindisp.cfm?bk = 7480 (accessed 2004)
- JAMA JAMA/JAPIA PDQ Guideline V3.0 Technical report, Japan Automobile Manufacturers Association, Tokyo, Japan (The JAMA/JAPIA PDQ guideline V3.0 is at http://www.jama.or.jp)
- Q-Checker: TransCAT GmbH 2005 http://www.q-checker.com, (accessed 2004)
- Rezayat , M . 2000 . Knowledge-based product development using XML and KCs . Comput. Aided Design , 32 : 299 – 309 .
- SOFEC: Projektgrupp S-PDQ 2003 Available online at: http://www.odette.se/arbetsgrupper.htm (accessed 2004)
- Steinbrenner , JP , Wynman , NJ and Chawner , JR . 2001 . Procedural CAD Model edge tolerance negotiation for surface meshing . Eng. Comput. , 17 : 315 – 325 .
- Tassey G Interoperability Cost Analysis of the U.S. Automotive Supply Chain Technical report, RTI Project Number 7007-03 1999 Research Triangle Institute Research Triangle Park NC
- VDA Abteilungen 2003 http://www.vda.de/de/vda/intern/organisation/abteilungen/log_cad_odette.html, (accessed 2004)
- Walker D Introduction of TOPGUN XI in Proceedings of the 2001 COE Conference Anaheim CA April, 2001
- Yang , J , Goltz , M and Han , S . 2004 . Parameter-based engineering changes for a distributed engineering environment . Concurr. Eng. Res. Applic. , 12 ( 4 ) : 275 – 286 .
- Yang , J , Han , S , Cho , J , Kim , B and Lee , HY . 2004 . An XML-based macro data representation for a parametric CAD model exchange . Comput. Aided Design Applic. , 1 : 153 – 162 .
- Yang , J , Han , S and Park , S . 2005 . A method for verification of CAD model quality . J. Eng. Design , 16 ( 3 ) : 280 – 291 .
- Yunas A Global success stories about international solutions in product data collaboration in Proceedings of the 2001 SASIG Meeting Japan October, 2001