Application of multi-sensor signals for monitoring tool/workpiece condition in broaching

References

• Abu-Mahfouz , I. 2003 . Drilling wear detection and classification using vibration signals and artificial neural network . Int. J. Machine Tools Mf. , 43 : 707 – 720 .
   Web of Science ®Google Scholar
• Axinte , D. , Boud , F. , Penny , J. and Gindy , N. 2005 . Broaching of Ti-6-4 – detection of workpiece surface anomalies on dovetail slots through process monitoring . CIRP Annls. , 54 : 87 – 90 .
   Google Scholar
• Axinte , D. A. , Gindy , N. , Fox , K. and Unanue , I. 2004 . Process monitoring to assist the workpiece surface quality in machining . Int. J. Machine Tools Mf. , 44 : 1091 – 1108 .
   Web of Science ®Google Scholar
• Barrios , L. J. , Ruiz , A. , Guinea , D. , Ibaňez , A. , Bustos , P. and Etxeberria , J. 1993 . Experimental comparison of sensors for tool-wear monitoring on milling . Sensors Actuators A , 37–38 : 589 – 595 .
   Google Scholar
• Bonifácio , M. R. and Diniz , A. E. 1994 . Correlating tool wear, tool life, surface roughness and tool vibration in finish turning with coated carbide tools . Wear , 173 : 137 – 144 .
   Web of Science ®Google Scholar
• Byrne , G. , Dornfeld , D. , Inasaki , I. , Ketteler , G. , König , W. and Teti , R. 1995 . Tool condition monitoring (TCM) – the status of research and industrial application . CIRP Annls. , 44 : 541 – 567 .
   Google Scholar
• Chiou , R. Y. and Liang , S. Y. 2000 . Analysis of acoustic emission in chatter vibration with tool wear effect in turning . Int. J. Machine Tools Mf. , 40 : 927 – 941 .
   Google Scholar
• Chung , K. T. and Geddam , A. 2003 . A multi-sensor approach to the monitoring of end milling operations . J. Mater Process Technol , 139 : 15 – 20 .
   Web of Science ®Google Scholar
• Couey , J. A. , March , E. R. , Knapp , B. R. and Vallance , R. R. 2002 . Monitoring force in precision cylindrical grinding . Precision Engng , 29 : 307 – 314 .
   Google Scholar
• Cuppini , D. , D'Errico , G. and Rutelli , G. 1990 . Tool wear monitoring based on cutting power measurement . Wear , 139 : 303 – 311 .
   Web of Science ®Google Scholar
• Dimla , D. E. Sr. and Lister , P. M. 2000 . On-line metal cutting tool condition monitoring. I: force and vibration analyses . Int J. Machine Tools Mf. , 40 : 739 – 768 .
   Web of Science ®Google Scholar
• Diniz , A. E. , Liu , J. J. and Dornfeld , D. A. 1992 . Correlating tool life, tool wear and surface roughness by monitoring acoustic emission in finish turning . Wear , 152 : 395 – 407 .
   Web of Science ®Google Scholar
• Dolinšek , S. and Kopač , J. 1999 . Acoustic emission signals for tool wear identification . Wear , 225–229 : 295 – 303 .
   Google Scholar
• Elbestawi , M. A. , Papazafiriou , T. A. and Du , R. X. 1991 . In-process monitoring of tool wear in milling using force signature . Int. J. Machine Tools Mf. , 31 : 55 – 73 .
   Google Scholar
• El-Wardany , T. I. , Gao , D. and Elbestawi , M. A. 1996 . Tool condition monitoring in drilling using vibration signature analysis . Int. J. Machine Tools Mf. , 36 : 687 – 711 .
   Web of Science ®Google Scholar
• Ertunc , H. M. and Oysu , C. 2004 . drill wear monitoring using cutting force signals . Mechatronics , 14 : 533 – 548 .
   Web of Science ®Google Scholar
• Fan , K. -C. , Lee , M. -Z. and Mou , J. -I. 2002 . On-line non-contact system for grinding wheel wear measurement . Int. J. Advd Mfg Technol. , 19 : 14 – 22 .
   Web of Science ®Google Scholar
• Govekar , E. , Gradišek , J. and Grabec , I. 2000 . Analysis of acoustic emission signals and monitoring of machining processes . Ultrasonics , 38 : 598 – 603 .
   PubMedGoogle Scholar
• Haber , R. E. , Jiménez , J. E. , Ronei Perez , C. and Alique , J. R. 2004 . An investigation of tool-wear monitoring in a high-speed machining process . Sensors Actuators A: Physical , 116 : 539 – 545 .
   Google Scholar
• Inasaki , I. 1998 . Application of acoustic emission sensor for monitoring machining processes . Ulrasonics , 36 : 273 – 281 .
   Web of Science ®Google Scholar
• Jantunen , E. 2002 . A summary of methods applied to tool condition monitoring in drilling . Int. J. Machine Tools Mf. , 42 : 997 – 1010 .
   Web of Science ®Google Scholar
• Kang , M. C. , Kim , J. S. and Kim , J. H. 2001 . A monitoring technique using a multi-sensor in high speed machining . J. Mater. Process. Technol. , 113 : 331 – 336 .
   Web of Science ®Google Scholar
• Kuljanic , E. 1975 . Cutting forces and surface roughness in broaching . CIRPAnnls. , 24 : 77 – 82 .
   Google Scholar
• Kuljanic , E. and Sortino , M. 2005 . TWEM, a method based on cutting forces – monitoring tool wear in face milling . Int. J. Machine Tools Mf. , 45 : 29 – 34 .
   Google Scholar
• Lee , D. E. , Hwang , I. , Valente , C. M.O. , Oliveira , J. F.G. and Dornfeld , D. A. 2006 . Precision manufacturing process monitoring with acoustic emission . Int. J. Machine Tools Mf. , 46 : 176 – 188 .
   Web of Science ®Google Scholar
• Lin , S. C. and Lin , R. J. 1996 . Tool wear monitoring in face milling using force signals . Wear , 198 : 136 – 142 .
   Web of Science ®Google Scholar
• Liu , T. I. and Wu , S. M. 1990 . On-line detection of drill wear . ASME J. Engng Ind. , 112 : 299 – 302 .
   Google Scholar
• Milfelner , M. , Cus , F. and Balic , J. 2005 . An overview of data acquisition system for cutting force measuring and optimization in milling . J. Mater. Process. Technol. , 164–165 : 1281 – 1288 .
   Google Scholar
• Mo , S. P. , Axinte , D. A. and Gindy , N. N.Z. 2005 . An example of selection of the cutting conditions in broaching of heat-resistant alloys based on cutting forces, surface roughness and tool wear . J. Mater. Process. Technol. , 160 : 382 – 389 .
   Web of Science ®Google Scholar
• Noori-Khajavi , A. and Komanduri , R. 1995 . Frequency and time domain analyses of sensor signals in drilling – I. Correlation with drill wear . Int. J. Machine Tools Mfg. , 35 : 775 – 793 .
   Google Scholar
• Ravindra , H. V. , Srinivasa , Y. G. and Krishnamurthy , R. 1997 . Acoustic emission for tool condition monitoring in metal cutting . Wear , 212 : 78 – 84 .
   Web of Science ®Google Scholar
• Ruiz , A. , Guinea , d. , Barrios , L. J. and Befancourt , F. 1993 . An empirical multi-sensor estimation of tool wear . Mech. Systems and Signal Process. , 7 : 105 – 119 .
   Google Scholar
• Sajeev , V. , Vijayaraghavan , L. and Rao , U. R.K. 2000a . Effect of tool-work deflections on the shape of a broached hole . Int. J. Mech. Engng Edu. , 28 : 88 – 92 .
   Google Scholar
• Sajeev , V. , Vijayaraghavan , L. and Rao , U. R.K. 2000b . An analysis of the effects of burnishing on internal broaching . Int. J. Engng Edu. , 28 : 163 – 173 .
   Google Scholar
• Sarhan , A. , Sayed , R. , Nassr , A. A. and El-Zahry , R. M. 2001 . Interrelationships between cutting force variation and tool wear in end-milling . J. Mater. Process. Technol. , 109 : 229 – 235 .
   Google Scholar
• Scheffer , C. and Heyns , P. S. 2001 . Wear monitoring in turning operations using vibration and strain measurements . Mech.Systems Signal Process. , 15 : 1185 – 1202 .
   Web of Science ®Google Scholar
• Srinivasa Pai , P. and Ramakrishna Rao , P. K. 2002 . acoustic emission analysis for tool wear monitoring in face milling . Int. J. Prod. Res. , 40 : 1081 – 1093 .
   Web of Science ®Google Scholar
• Sutherland , J. W. , Salisbury , E. J. and Hoge , F. W. 1997 . A model for the cutting force system in the gear broaching process . Int. J. Machine Tools Mf. , 37 : 1409 – 1421 .
   Google Scholar
• Tansel , I. , Trujillo , M. , Nedbouyan , A. , Velez , C. , Bao , W. -Y. , Arkan , T. T. and Tansel , B. 1998 . Micro-end-milling – III – Wear estimation and tool breakage detection using acoustic emission signals . Int. J. Machine Tools Mf. , 38 : 1449 – 1466 .
   Web of Science ®Google Scholar
• Tlusty , J. and Andrews , G. C. 1983 . A critical review of sensors for unmanned machining . CIRP Annls. , 32 : 563 – 572 .
   Google Scholar
• Tonshoff , H. K. , Jung , M. , Mannel , S. and Rietz , W. 2000 . Using acoustic emission signals for monitoring of production processes . Ultrasonics , 37 : 681 – 686 .
   PubMedGoogle Scholar
• Tonshoff , H. K. , Wulfsberg , J. P. , Kals , H. J.J. , König , W. and van Luttervelt , C. A. 1988 . Development and trends in monitoring and control of machining processes . CIRP Annls. , 37 : 611 – 622 .
   Google Scholar
• Vijayaraghavan , L. , Krishnamurthy , R. and Chandrasekaran , H. 1981 . Evaluation of stress and displacement of tool and workpiece on broaching . Int. J. Machine Tool Des. , 21 : 263 – 270 .
   Google Scholar
• Wang , Z. , Willett , P. , DeAguiar , P. R. and Webster , J. 2001 . Neural network detection of grinding burn from acoustic emission . Int. J. Machine Tools Mf. , 4 : 283 – 309 .
   Google Scholar
• Xiang , H. , Chen , J. H. , Zhou , Y. F. and Zhou , J. 2002 . A multi-sensor inspection system based on RMOS . Int. J. Advd Mfg Technol. , 19 : 448 – 453 .
   Google Scholar
• Yan , D. , El-Wardany , T. I. and Elbestawi , M. A. 1995 . A multi-sensor strategy for tool failure detection in milling . Int. J. Machine Tools Mf. , 35 : 383 – 398 .
   Google Scholar