Performance analysis of developed vegetable-based cutting fluids by D-optimal experimental design in turning process

References

• Adhvaryu , A. 2004 . Tribological studies of thermally and chemically modified vegetable oils for use as environmentally friendly lubricants . Wear , 257 : 359 – 367 .
   Web of Science ®Google Scholar
• Belluco , W. and De Chiffre , L. 2001 . Testing of vegetable-based cutting fluids by hole making operations . Lubrication Engineering , 57 : 12 – 16 .
   Google Scholar
• Belluco , W. and De Chiffre , L. 2002 . Surface integrity and part accuracy in reaming and tapping stainless steel with new vegetable based cutting oils . Tribology International , 35 : 865 – 870 .
   Web of Science ®Google Scholar
• Belluco , W. and De Chiffre , L. 2004 . Performance evaluation of vegetable-based oils in drilling austenitic stainless steel . Journal of Materials Processing Technology , 148 : 171 – 176 .
   Web of Science ®Google Scholar
• Bennett , E.O. 1983 . Water based cutting fluids and human health . Tribology International , 16 : 133 – 136 .
   Web of Science ®Google Scholar
• Birova , A. , Pavloviova , A. and Cvengro , J. 2002 . Lubricating oils based on chemically modified vegetable oils . Journal of Synthetic Lubrication , 18 : 291
   Google Scholar
• Bouacha , K. 2010 . Statistical analysis of surface roughness and cutting forces using response surface methodology in hard turning of AISI 52100 bearing steel with CBN tool . International Journal of Refractory Metals & Hard Materials , 28 : 349 – 361 .
   Web of Science ®Google Scholar
• Bouaziz , Z. and Zghal , A. 2008 . Optimization and selection of cutters for 3D pocket machining . International Journal of Computer Integrated Manufacturing , 21 : 73 – 88 .
   Web of Science ®Google Scholar
• Cetin , M.H. 2010 . Investigation of vegetable-based cutting fluids performance in turning , Gebze Institute of Technology . Thesis (MSc)
   Google Scholar
• Cetin , M.H. 2011 . Evaluation of vegetable based cutting fluids with extreme pressure and cutting parameters in turning of AISI 304L by Taguchi method . Journal of Cleaner Production , 19 : 2049 – 2056 .
   Web of Science ®Google Scholar
• Chen , C.C. 2011 . The use of D-optimal design for modeling and analyzing the vibration and surface roughness in the precision turning with a diamond cutting tool . International Journal of Advanced Manufacturing Technology , 54 : 465 – 478 .
   Web of Science ®Google Scholar
• Clarens , A.F. Experimental comparison of vegetable and petroleum base oils in metalworking fluids using the tapping torque test . Proceedings of Japan–USA symposium on flexible automation . July 19–21 . pp. 1 – 6 .
   Google Scholar
• De Chiffre , L. 1988 . Function of cutting fluids in machining . Lubrication Engineering , 44 : 514 – 518 .
   Google Scholar
• De Chiffre , L. and Belluco , W. 2002 . Investigations of cutting fluid performance using different machining operations . Lubrication Engineering , 58 : 22 – 29 .
   Google Scholar
• DeGarmo , E.P. , Black , J.T. and Kohser , R.A. 1997 . Materials and processes in manufacturing , Upper Saddle River , NJ : Prentice-Hall .
   Google Scholar
• Dickinson , E. 1992 . Interfacial interactions and the stability of oil-in-water emulsions . Pure and Applied Chemistry , 64 : 1721 – 1724 .
   Web of Science ®Google Scholar
• El-Mounayri , H. and Deng , H. 2010 . A generic and innovative approach for integrated simulation and optimisation of end milling using solid modelling and neural network . International Journal of Computer Integrated Manufacturing , 23 : 40 – 60 .
   Web of Science ®Google Scholar
• El-Tamimi , A.M. and El-Hossainy , T.M. 2008 . Investigating the tool life, cutting force components, and surface roughness of AISI 302 stainless steel material under oblique machining . Materials and Manufacturing Processes , 23 : 427 – 438 .
   Web of Science ®Google Scholar
• Fox , N.J. and Stachowiak , G.W. 2007 . Vegetable oil based lubricants – a review of oxidation . Tribology International , 40 : 1035 – 1046 .
   Web of Science ®Google Scholar
• Igbal , A. 2008 . Modeling the effects of cutting parameters in MQL-employed finish hard-milling process using D-optimal method . Journal of Materials Processing Technology , 199 : 379 – 390 .
   Web of Science ®Google Scholar
• Jayal , A.D. and Balaji , A.K. 2009 . Effects of cutting fluid application on tool wear in machining: interactions with tool coatings and tool surface features . Wear , 267 : 1723 – 1730 .
   Web of Science ®Google Scholar
• Kalpakjian , S. and Schmid , S.R. 2001 . Manufacturing Engineering and Technology , Upper Saddle River , NJ : Prentice Hall .
   Google Scholar
• Krahenbuhl , U. 2005 . Vegetable oil based coolants improve cutting performance [online] Available from: http://www.entrepreneur.com/tradejournals/article/95355661.html [Accessed 11 April 2011]
   Google Scholar
• Kuram , E. 2011 . Evaluation of new vegetable-based cutting fluids on thrust force and surface roughness in drilling of AISI 304 using Taguchi method . Materials and Manufacturing Processes , 26 : 1136 – 1146 .
   Web of Science ®Google Scholar
• Lalwani , D.I. , Mehta , N.K. and Jain , P.K. 2008 . Experimental investigations of cutting parameters influence on cutting forces and surface roughness in finish hard turning of MDN250 steel . Journal of Materials Processing Technology , 206 : 167 – 179 .
   Web of Science ®Google Scholar
• Matthew , T.S. 2007 . Influence of fatty acid composition on the tribological performance of two vegetable-based lubricants . Journal of Synthetic Lubrication , 24 : 101 – 110 .
   Google Scholar
• Muñoz-Escalona , P. and Maropoulos , P. 2010 . Integrated optimisation of surface roughness and tool performance when face milling 416 SS . International Journal of Computer Integrated Manufacturing , 23 : 248 – 256 .
   Web of Science ®Google Scholar
• Noordin , M.Y. 2004 . Application of response surface methodology in describing the performance of coated carbide tools when turning AISI 1045 steel . Journal of Materials Processing Technology , 145 : 46 – 58 .
   Web of Science ®Google Scholar
• Ozcelik , B. 2011a . Experimental investigations of vegetable based cutting fluids with extreme pressure during turning of AISI 304L . Tribology International , 44 : 1864 – 1871 .
   Web of Science ®Google Scholar
• Ozcelik , B. 2011b . Optimization of surface roughness in drilling using vegetable based cutting oils developed from sunflower oil . Industrial Lubrication and Tribology , 63 ( 4 ) : 271 – 276 .
   Web of Science ®Google Scholar
• Poston , W.L. , Wegman , E.J. and Solka , J.L. 1998 . D-optimal design methods for robust estimation of multivariate location and scatter . Journal of Statistical Planning and Inference , 73 : 205 – 213 .
   Web of Science ®Google Scholar
• Rao , D.N. and Srikant , R.R. 2006 . Influence of emulsifier content on cutting fluid properties . Proceedings of the Institution of Mechanical Engineers , 220 : 1803 – 1806 .
   Web of Science ®Google Scholar
• Samanta , B. 2009 . Surface roughness prediction in machining using soft computing . International Journal of Computer Integrated Manufacturing , 22 ( 3 ) : 257 – 266 .
   Web of Science ®Google Scholar
• Shashidhara , Y.M. and Jayaram , S.R. 2010 . Vegetable oils as a potential cutting fluid – an evaluation . Tribology International , 43 : 1073 – 1081 .
   Web of Science ®Google Scholar
• Srikant , R.R. , Rao , D.N. and Rao , P.N. 2009 . Influence of emulsifier content in cutting fluids on cutting forces, cutting temperatures, tool wear, and surface roughness . Proceedings of the IMechE, Part J: Journal of Engineering Tribology , 223 : 203 – 209 .
   Web of Science ®Google Scholar
• Thiele , J.D. and Melkote , S.N. 1999 . Effect of cutting edge geometry and workpiece hardness on surface generation in the finish hard turning of AISI 52100 steel . Journal of Materials Processing Technology , 94 : 216 – 226 .
   Web of Science ®Google Scholar
• Trent , E.M. and Wright , P.K. 2000 . Metal cutting , Newton , MA : Butterworth Heinemann .
   Google Scholar
• Xavior , M.A. and Adithan , M. 2009 . Determining the influence of cutting fluids on tool wear and surface roughness during turning of AISI 304 austenitic stainless steel . Journal of Materials Processing Technology , 209 : 900 – 909 .
   Web of Science ®Google Scholar
• Xinfeng , H.E. and Kratz , H. 2006 . Forces in hard turning of 51CRV4 with wiper cutting tool . Tsinghua Science and Technology , 11 : 501 – 506 .
   Google Scholar
• Zain , A.M. , Haron , H. and Sharif , S. 2011a . Integration of simulated annealing and genetic algorithm to estimate optimal solutions for minimising surface roughness in end milling Ti–6Al–4V . International Journal of Computer Integrated Manufacturing , 24 : 574 – 592 .
   Web of Science ®Google Scholar
• Zain , A.M. , Haron , H. and Sharif , S. 2011b . Optimization of process parameters in the abrasive waterjet machining using integrated SA-GA . Applied Soft Computing , 11 : 5350 – 5359 .
   Web of Science ®Google Scholar