Feature-based modelling and process parameters selection in a CAPP system for prismatic micro parts

References

• Ali, M. Y., M. A. Omar, K. I. Othman, and W. N. Hung. 2009. “Prediction of Burr Formation in Fabricating MEMS Components by Micro End Milling.” Advanced Materials Research 74: 247–250. doi:10.4028/www.scientific.net/AMR.74.247.
   Google Scholar
• Amaitik, S. M. 2013. “Fuzzy Logic Models for Selection of Machining Parameters in CAPP Systems.” International Journal of Computer and Information Technology 2 (2): 279–285.
   Google Scholar
• Amaitik, S. M., and S. E. Kiliç. 2005. “STEP-Based Feature Modeller for Computer-Aided Process Planning.” International Journal of Production Research 43 (15): 3087–3101. doi:10.1080/00207540500104019.
   Web of Science ®Google Scholar
• Arunkumar, P., S. Anand, A. Deshpande, and C. S. Kumar. 2008. “A System for Extracting Product Features from Cad Models – A STEP Approach.” Contemporary Engineering Sciences 1 (3): 139–146.
   Google Scholar
• Asad, A. B. M. A., T. Masaki, M. Rahman, H. S. Lim, and Y. S. Wong. 2007. “Tool-Based Micro-Machining.” Journal of Materials Processing Technology 192–193: 204–211. doi:10.1016/j.jmatprotec.2007.04.038.
   Web of Science ®Google Scholar
• Azlan, A. R., M. Azuddin, and W. Abdullah. 2009. “Effect of Machining Parameters on Hole Quality of Micro Drilling for Brass.” CCSE Journal 3 (5): 221–230.
   Google Scholar
• Baskar, N., P. Asokan, G. Prabhaharan, and G. Prabhaharan. 2005. “Optimization of Machining Parameters for Milling Operations Using Non-Conventional Methods.” The International Journal of Advanced Manufacturing Technology 25: 1078–1088. doi:10.1007/s00170-003-1939-9.
   Web of Science ®Google Scholar
• Bismay, K. B. 2011. “Parametric Optimization of Micro Drilling in Aerospace Material.” Thesis, NIT Rourkela.
   Google Scholar
• Boris, S., L. Kiha, and A. D. David. 2004. “Burr Formation in Micro-Drilling.” Conference of Consortium on Deburring and Edge Finishing, Berkeley, CA, June 9–10.
   Google Scholar
• Champati, S., W. F. Lu, and A. C. Lin. 1996. “Automated Operation Sequencing in Intelligent Process Planning: A Case-Based Reasoning Approach.” The International Journal of Advanced Manufacturing Technology 12: 21–36. doi:10.1007/BF01178959.
   Web of Science ®Google Scholar
• Dereli, T., and İ. H. Filiz. 1999. “Optimisation of Process Planning Functions by Genetic Algorithms.” Computers & Industrial Engineering 36: 281–308. doi:10.1016/S0360-8352(99)00133-3.
   Web of Science ®Google Scholar
• Devireddy, C. R., and G. Kalyan. 1999. “Feature-Based Modelling and Neural Networks Based CAPP for Integrated Manufacturing.” International Journal of Computer Integrated Manufacturing 12 (1): 61–74. doi:10.1080/095119299130470.
   Web of Science ®Google Scholar
• Edalew, K. O., H. S. Abdalla, and R. J. Nash. 2001. “A Computer-Based Intelligent System for Automatic Tool Selection.” Materials and Design 22 (5): 337–351. doi:10.1016/S0261-3069(00)00106-0.
   Web of Science ®Google Scholar
• Gaitonde, V. N., S. R. Karnik, B. T. Achyutha, and B. Siddeswarappa. 2008. “Genetic Algorithm-Based Burr Size Minimization in Drilling of AISI 316L Stainless Steel.” Journal of Materials Processing Technology 197: 225–236. doi:10.1016/j.jmatprotec.2007.06.029.
   Web of Science ®Google Scholar
• Ionel, B. 2008. “Computational Technique Model for CAD-CAPP Integration.” 9th International Conference on Mathematics & Computers in Business and Economics (MCBE ‘08), Bucharest, June 24–26.
   Google Scholar
• Jan, C. B., G. Jens, and F. Dieter. 2000. Automated Extraction of Features from Cad Models for 3d Object Recognition. Vol. Xxxiii. Amsterdam: ISPRS.
   Google Scholar
• Jeba, D. K., C. Jebaraj, and C. Jebaraj. 2005. “Feature-Based Design for Process Planning of Machining Processes with Optimization Using Genetic Algorithms.” International Journal of Production Research 43 (18): 3855–3887. doi:10.1080/00207540500032160.
   Web of Science ®Google Scholar
• Jiang, B., H. Lau, F. T. S. Chan, and H. Jiang. 1999. “An Automatic Process Planning System for the Quick Generation of Manufacturing Process Plans Directly from CAD Drawings.” Journal of Materials Processing Technology 87: 97–106. doi:10.1016/S0924-0136(98)00337-9.
   Web of Science ®Google Scholar
• Joze, P., K. Simon, and B. Simon. 2008. “Feature Extraction from CAD Models for Milling Strategy Prediction.” Journal of Mechanical Engineering 54 (5): 301–307.
   Web of Science ®Google Scholar
• Kang, M., J. Han, and J. G. Moon. 2003. “An Approach for Interlinking Design and Process Planning.” Journal of Materials Processing Technology 139: 589–595. doi:10.1016/S0924-0136(03)00516-8.
   Web of Science ®Google Scholar
• Kayacan, M. C., I. H. Filiz, A. I. Sönmez, A. Baykasoǧlu, and T. Dereli. 1996. “OPPS-ROT: An Optimised Process Planning System for Rotational Parts.” Computers in Industry 32: 181–195. doi:10.1016/S0166-3615(96)00061-9.
   Web of Science ®Google Scholar
• Khoshnevis, B., and W. Tan. 1995. “Automated Process Planning for Hole-Making.” American Society of Mechanical Engineering Manufacturing Review 8 (2): 106–113.
   Google Scholar
• Kilickap, E. 2010. “Modeling and Optimization of Burr Height in Drilling of Al-7075 Using Taguchi Method and Response Surface Methodology.” The International Journal of Advanced Manufacturing Technology 49: 911–923. doi:10.1007/s00170-009-2469-x.
   Web of Science ®Google Scholar
• Lai, X., H. Li, C. Li, Z. Lin, and J. Ni. 2008. “Modelling and Analysis of Micro Scale Milling Considering Size Effect, Micro Cutter Edge Radius and Minimum Chip Thickness.” International Journal of Machine Tools & Manufacture 48: 1–14. doi:10.1016/j.ijmachtools.2007.08.011.
   Web of Science ®Google Scholar
• Lalit, P., and S. S. Pande. 2002. “An Intelligent Feature-Based Process Planning System for Prismatic Parts.” International Journal of Production Research 40 (17): 4431–4447.
   Web of Science ®Google Scholar
• Lee, K., and D. A. Dornfeld. 2004. A Study of Surface Roughness in the Micro-End-Milling Process Consortium on Deburring and Edge Finishing. Berkeley: Laboratory for Manufacturing and Sustainability, University of California.
   Google Scholar
• Montgomery, D. C. 2010. Design and Analysis of Experiments. 5th ed. New Delhi: Wiley India.
   Google Scholar
• Pande, S. S., and N. H. Palsule. 1988. “GCAPPS – A Computer Assisted Generative Process Planning System for Turned Components.” Computer Aided Engineering Journal 5: 163–168. doi:10.1049/cae.1988.0036.
   Google Scholar
• Phama, D. T., A. M. Elkaseera, K. P. Popova, S. S. Dimova, L. Olejnikc, and A. Rosochowskid. 2009. “An Experimental and Statistical Study of the Factors Affecting Surface Roughness in the Micro Milling Process.” Proceedings of Innovative Production Machines and System. Cardiff: IPROMS.
   Google Scholar
• Prasad, A. V. S. R. K., P. N. Rao, and U. R. K. Rao. 1997. “Optimal Selection of Process Parameters for Turning Operations in a CAPP System.” International Journal of Production Research 35: 1495–1522. doi:10.1080/002075497195083.
   Web of Science ®Google Scholar
• Radhakrishnan, P., S. Subramanyan, and V. Raju. 2000. “Automated Process Planning.” In CAD/CAM/CIM, 2nd ed., 223–259. New Delhi: New Age I.
   Google Scholar
• Rahimic, S., and V. Visekruna. 2007. “Optimization of Generative Process Planning System with Minimum Cost per Piece.” Advances in Production Engineering and Management 2: 177–184.
   Google Scholar
• Rahman, M., A. Senthil Kumar, and J. R. S. Prakash. 2001. “Micro Milling of Pure Copper.” Journal of Materials Processing Technology 116: 39–43. doi:10.1016/S0924-0136(01)00848-2.
   Web of Science ®Google Scholar
• Rajmohan, T., K. Palanikumar, and M. Kathirvel. 2012. “Optimization of Machining Parameters in Drilling Hybrid Aluminium Metal Matrix Composites.” Transactions of Nonferrous Metals Society of China 22: 1286–1297. doi:10.1016/S1003-6326(11)61317-4.
   Web of Science ®Google Scholar
• Rameshbabu, V., and M. S. Shunmugam. 2009. “Hybrid Feature Recognition Method for Setup Planning from STEP AP-203.” Robotics and Computer-Integrated Manufacturing 25: 393–408. doi:10.1016/j.rcim.2007.09.014.
   Web of Science ®Google Scholar
• Sadaiah, M., D. R. Yadav, P. V. Mohanram, and P. Radhakrishnan. 2002. “A Generative Computer-Aided Process Planning System for Prismatic Components.” The International Journal of Advanced Manufacturing Technology 20: 709–719. doi:10.1007/s001700200228.
   Web of Science ®Google Scholar
• Saleh, M., and S. M. Amaitik. 2012. “An Integrated CAD/CAPP System Based on STEP Features.” Proceedings of the 2012 international conference on industrial engineering and operations management, Istanbul, July 3–6.
   Google Scholar
• Sankha, D., J. Raul Parra-Castillo, and G. Kalyan. 2011. “An Integrated and Intelligent Computer-Aided Process Planning Methodology for Machined Rotationally Symmetrical Parts.” International Journal of Advanced Manufacturing Systems 13 (1): 1–26.
   Google Scholar
• Saravanan, R., R. Siva Sankar, P. Asokan, K. Vijayakumar, and G. Prabhaharan. 2005. “Optimization of Cutting Conditions during Continuous Finished Profile Machining Using Non-Traditional Techniques.” The International Journal of Advanced Manufacturing Technology 26: 30–40. doi:10.1007/s00170-003-1938-x.
   Web of Science ®Google Scholar
• Shunmugam, M. S., P. Mahesh, and S. V. Bhaskara Reddy. 2002. “A Method of Preliminary Planning for Rotational Components with C-Axis Features Using Genetic Algorithm.” Computers in Industry 48 (3): 199–217. doi:10.1016/S0166-3615(02)00039-8.
   Web of Science ®Google Scholar
• Sivasankar, R., P. Asokan, G. Prabhaharan, and A. V. Phani. 2008. “A CAPP Framework with Optimized Process Parameters for Rotational Components.” International Journal of Production Research 46 (20): 5561–5587. doi:10.1080/00207540701288108.
   Web of Science ®Google Scholar
• Sreeramulu, D., and C. S. P. Rao. 2011. “A New Methodology for Recognizing Features in Rotational Parts Using STEP Data Exchange Standard.” International Journal of Engineering, Science and Technology 3 (6): 102–115.
   Google Scholar
• Sunil, V. B., and S. S. Pande. 2009. “Automatic Recognition of Machining Features Using Artificial Neural Networks.” The International Journal of Advanced Manufacturing Technology 41: 932–947. doi:10.1007/s00170-008-1536-z.
   Web of Science ®Google Scholar
• Vamsi Krishna, P., N. V. S. Shankar, and B. Surendra Babu. 2011. “Feature Based Modeling and Automated Process Plan Generation for Turned Components.” Advances in Production Engineering and Management 6 (3): 153–162.
   Google Scholar
• Waiyagan, K., and E. L. Bohez. 2009. “Intelligent Feature Based Process Planning for Five-Axis Mill-Turn Parts.” Computers in Industry 60: 296–316. doi:10.1016/j.compind.2008.09.009.
   Web of Science ®Google Scholar
• Wong, T. N., and K. N. Wong. 1995. “A Feature-Based Design System for Computer-Aided Process Planning.” Journal of Materials Processing Technology 52: 122–132. doi:10.1016/0924-0136(94)01432-Z.
   Web of Science ®Google Scholar
• Xu, X., L. Wang, and S. T. Newman. 2011. “Computer-Aided Process Planning – A Critical Review of Recent Developments and Future Trends.” International Journal of Computer Integrated Manufacturing 24 (1): 1–31.
   Web of Science ®Google Scholar
• Xu, X. W., H. Wang, J. Mao, S. T. Newman, T. R. Kramer, F. M. Proctor, and J. L. Michaloski. 2005. “STEP-Compliant NC Research: The Search for Intelligent CAD/CAPP/CAM/CNC Integration.” International Journal of Production Research 43: 3703–3743. doi:10.1080/00207540500137530.
   Web of Science ®Google Scholar
• Younis, M. A., A. Wahab. 1997. “A CAPP Expert System for Rotational Components.” Computers & Industrial Engineering 33 (3–4): 509–512. doi:10.1016/S0360-8352(97)00180-0.
   Web of Science ®Google Scholar
• Yusri, Y., and C. Keith. 2008. “STEP Compliant CAD /CAPP /CAM System for Turning Operations.” Proceedings of the World Congress on Engineering and Computer Science WCECS, San Francisco, CA, October 22–24.
   Google Scholar
• Zhang, X., R. Liu, A. Nassehi, and S. T. Newman. 2011. “A STEP-Compliant Process Planning System for CNC Turning Operations.” Robotics and Computer-Integrated Manufacturing 27 (2): 349–356. doi:10.1016/j.rcim.2010.07.018.
   Web of Science ®Google Scholar