References
- Almeida, H. A., and P. J. Bártolo. 2013. “Topological Optimisation of Scaffolds for Tissue Engineering.” Procedia Engineering 59: 298–306. Accessed June 4, 2014. Available from http://www.sciencedirect.com/science/article/pii/S1877705813010394 http://www.sciencedirect.com/science/article/pii/S1877705813010394#
- Bruggi, M., and A. Taliercio. 2013. “Topology Optimization of the Fiber-Reinforcement Retrofitting Existing Structures.” International Journal of Solids and Structures 50 (1): 121–136. Accessed March 22, 2014. Available from http://www.sciencedirect.com/science/article/pii/S0020768312003927 http://ac.els-cdn.com/S0020768312003927/1-s2.0-S0020768312003927-main.pdf?_tid=adfef5b8-7a1c-11e4-9de2-00000aacb360&acdnat=1417522612_4ab8c1a44df112d10ab2f610a1f4d714
- Cazon, A., P. Morer, and L. Matey. 2014. “Polyjet Technology for Product Prototyping: Tensile Strength and Surface Roughness Properties.” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 228: 1664–1675. Accessed June 3. Available from http://pib.sagepub.com/content/early/2014/04/11/0954405413518515 http://pib.sagepub.com/content/228/12/1664.full.pdf
- Chang, P. S., and D. W. Rosen. 2013. “The Size Matching and Scaling Method: A Synthesis Method for the Design of Mesoscale Cellular Structures.” International Journal of Computer Integrated Manufacturing 26 (10): 907–927. Accessed June 27, 2014. Available from: http://dx.doi.org/10.1080/0951192X.2011.650880 http://www.tandfonline.com/doi/full/10.1080/0951192X.2011.650880#.U61X3Pl5PA0 http://www.tandfonline.com/doi/pdf/10.1080/0951192X.2011.650880
- Chu, C., G. Graf, and D. W. Rosen. 2008. “Design for Additive Manufacturing of Cellular Structures.” Computer-Aided Design and Applications 5 (5): 686–696. Accessed March 22, 2014. Available from: http://www.tandfonline.com/doi/abs/10.3722/cadaps.2008.686-696 http://www.tandfonline.com/doi/abs/10.3722/cadaps.2008.686-696#preview http://www.tandfonline.com/doi/pdf/10.3722/cadaps.2008.686-696
- Chu, J., S. Engelbrecht, G. Graf, and D. W. Rosen. 2010. “A Comparison of Synthesis Methods for Cellular Structures with Application to Additive Manufacturing.” Rapid Prototyping Journal 16 (4): 275–283. Accessed May 28, 2014. Available from: http://www.emeraldinsight.com/journals.htm?issn=1355-2546&volume=16&issue=4&articleid=1864394&show=html
- Colburn, M., I. Suez, B. J. Choi, M. Meissl, T. Bailey, S. V. Sreenivasan, J. G. Ekerdt, and C. G. Willson. 2001. “Characterization and Modeling of Volumetric and Mechanical Properties for Step and Flash Imprint Lithography Photopolymers.” Journal of Vacuum Science & Technology B 19 (6): 2685–2689. Accessed July 26, 2014. Available from http://scitation.aip.org/content/avs/journal/jvstb/19/6/10.1116/1.1420199 http://scitation.aip.org/docserver/fulltext/avs/journal/jvstb/19/6/1.1420199.pdf?expires=1417524000&id=id&accname=2115537&checksum=1AD60F05C1820DC66DAEEB3A9972E8EE
- Dai, L., Y. Gu, G. Zhao, and Y. Guo, 2005. “Structural Shape Optimization Based on Parametric Dimension-Driving and Cad Software Integrationed.” 6th World Congress on Structural and Multidisciplinary Optimization, Rio de Janeiro, May 30–June 3, 1–8.
- Della Cioppa, A., C. De Stefano, and A. Marcelli. 2004. “On the Role of Population Size and Niche Radius in Fitness Sharing.” IEEE Transactions on Evolutionary Computation 8 (6): 580–592. Available from: http://ieeexplore.ieee.org/xpls/abs_all.jsp?arnumber=1369248&tag=1 http://ieeexplore.ieee.org/ielx5/4235/29964/01369248.pdf?tp=&arnumber=1369248&isnumber=29964
- Gibson, I., G. Goenka, R. Narasimhan, and N. Bhat. 2010. “Design Rules for Additive Manufacture.” SFF 2010: proceedings of the solid freeform fabrication 2010 international symposium, University of Texas, Austin, Texas.
- Gibson, I., D. W. Rosen, and B. Stucker. 2009. Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing. New York: Springer.
- Gibson, I., and D. Shi. 1997. “Material Properties and Fabrication Parameters in Selective Laser Sintering Process.” Rapid Prototyping Journal 3 (4): 129–136. Accessed August 7, 2014. Available from http://www.emeraldinsight.com/journals.htm?articleid=1455147
- Hopkinson, N., R. Hague, and P. Dickens. 2006. Rapid Manufacturing: An Industrial Revolution for the Digital Age. Chichester: John Wiley & Sons.
- Jin, R., W. Chen, and T. W. Simpson. 2001. “Comparative Studies of Metamodelling Techniques under Multiple Modelling Criteria.” Structural and Multidisciplinary Optimization 23 (1): 1–13. Accessed August 9, 2014. Available from http://link.springer.com/article/10.1007/s00158-001-0160-4 http://download.springer.com/static/pdf/632/art%253A10.1007%252Fs00158-001-0160-4.pdf?auth66=1417522596_06b5b4c7d403a323c83e96b80a78638a&ext=.pdf
- Kruth, J.-P., M. C. Leu, and T. Nakagawa. 1998. “Progress in Additive Manufacturing and Rapid Prototyping.” CIRP Annals - Manufacturing Technology 47 (2): 525–540. Accessed August 15, 2014. Available from: http://www.sciencedirect.com/science/article/pii/S0007850607632405
- Lee, J.-H., S.-C. Hwang, J. H. Park, and K.-H. Lee, 2010. Structural Design Examples Using Metamodel-Based Approximation Modeled, 153–156. Edited by World Scientific and Engineering Academy and Society (WSEAS). Stevens Point, WI: World Scientific and Engineering Academy and Society (WSEAS).
- Lophaven, S. N., H.B. Nielsen, and J. Søndergaard. 2002a. “Aspects of the Matlab Toolbox Dace.” Available from: http://www.researchgate.net/publication/235709885_Aspects_of_the_Matlab_Toolbox_DACE
- Lophaven, S. N., H. B. Nielsen, and J. Søndergaard, 2002b. A Matlab Kriging Toolbox. Technical University of Denmark, Kongens Lyngby, Technical Report No. IMM-TR-2002-12. Accessed July 18, 2014. Available from: http://www.imm.dtu.dk/~hbn/dace/dace.pdf
- Marjanovic, N., B. Isailovic, and M. Blagojevic. 2009. “Structural Optimization in Cad Software.” Optimization 10 (1): 27–32. Accessed March 21, 2014. Available from http://www.mdesign.ftn.uns.ac.rs/pdf/2009/027-032_for_web.pdf
- Muraru, L., J. Pallari, V. Creylman, J. Vander Sloten, and L. Peeraer, 2010. “SLS Nylon 12 Characterization through Tensile Testing and Digital Image Correlation for Finite Element Modelling of Foot and Ankle-Foot Orthoses.” 21st Solid Freeform Fabrication Symposium, Austin, TX, USA.
- Roman Gatzi, M. U., 2000. “Structural Optimization Tool Using Genetic Algorithms and Ansys.” Available from: http://www.researchgate.net/publication/255633327_Structural_Optimization_Tool_using_Genetic_Algorithms_and_Ansys
- Rosen, D. W. 2007. “Computer-Aided Design for Additive Manufacturing of Cellular Structures.” Computer-Aided Design and Applications 4 (5): 585–594. Accessed July 15, 2014. Available from: http://www.tandfonline.com/doi/abs/10.1080/16864360.2007.10738493 http://www.tandfonline.com/action/cookieAbsent
- Rubén, P., M. Mario, W. Gabriel, O. Fernando, and G. Begoña, 2013. “Design Optimization with Gas and Surrogate Models for Lightening Parts Made by Additive Manufacturing.” The Tenth International Conference on Evolutionary and Deterministic Methods for Design, Optimization and Control with Applications to Industrial and Societal Problems, Las Palmas de Gran Canaria, October 7–9, 179–182.
- Sachlos, E., and J. T. Czernuszka. 2003. “Making Tissue Engineering Scaffolds Work. Review: The Application of Solid Freeform Fabrication Technology to the Production of Tissue Engineering Scaffolds.” European Cells & Materials 5 (29): 39–40. Accessed August 8, 2014. Available from: http://www.ecmjournal.org/journal/papers/vol005/pdf/v005a03.pdf?referer=www.clickfind.com.au
- Vesenjak, M., A. Öchsner, and Z. Ren. 2009. “Computational Modelling of Closed- and Open-Cell Cellular Structures with Fillers.” In Iutam Symposium on Mechanical Properties of Cellular Materials, edited by H. Zhao and D. N. A. Fleck, Cachan, September 17–20, 2007. 197–206. Springer Netherlands. doi:10.1007/978-1-4020-9404-0.
- Wang, H., Y. Chen, and D. W. Rosen, 2005. “A Hybrid Geometric Modeling Method for Large Scale Conformal Cellular Structures.” 421–427. Accessed March 22, 2014. Available from: http://dx.doi.org/10.1115/DETC2005-85366 http://proceedings.asmedigitalcollection.asme.org/proceeding.aspx?articleid=1588169
- Wang, H. V., and D. W. Rosen. 2001. Computer-Aided Design Methods for the Additive Fabrication of Truss Structure. Atlanta: School of Mechanical Engineering, Georgia Institute of Technology.
- Wong, K. V., and A. Hernandez, 2012. A Review of Additive Manufacturing. ISRN Mechanical Engineering, 2012. Accessed August 8, 2014. Available from: http://www.hindawi.com/journals/isrn.mechanical.engineering/2012/208760/abs/ http://downloads.hindawi.com/journals/isrn/2012/208760.pdf
- Yang, S., K.-F. Leong, Z. Du, and C.-K. Chua. 2001. “The Design of Scaffolds for Use in Tissue Engineering. Part I. Traditional Factors.” Tissue Engineering 7 (6): 679–689. Accessed August 8, 2014. Available from http://online.liebertpub.com/doi/abs/10.1089/107632701753337645
- Yeong, W.-Y., C.-K. Chua, K.-F. Leong, and M. Chandrasekaran. 2004. “Rapid Prototyping in Tissue Engineering: Challenges and Potential.” Trends in Biotechnology 22 (12): 643–652. Accessed August 8, 2014. Available from http://www.sciencedirect.com/science/article/pii/S0167779904002926 http://ac.els-cdn.com/S0167779904002926/1-s2.0-S0167779904002926-main.pdf?_tid=fbcdacca-7a1d-11e4-b476-00000aacb35d&acdnat=1417523172_03f8f88be16c320647e94dc338b75c37
- Yoo, D.-J. 2011. “Computer-Aided Porous Scaffold Design for Tissue Engineering Using Triply Periodic Minimal Surfaces.” International Journal of Precision Engineering and Manufacturing 12 (1): 61–71. Accessed March 22, 2014. Available from http://link.springer.com/article/10.1007/s12541-011-0008-9 http://link.springer.com/article/10.1007%2Fs12541-011-0008-9#page-1 http://download.springer.com/static/pdf/452/art%253A10.1007%252Fs12541-011-0008-9.pdf?auth66=1417522471_d08f772a1aa671f693fa4a757284846d&ext=.pdf
- Zhu, P., Y. Zhang, and G. L. Chen. 2009. “Metamodel-Based Lightweight Design of an Automotive Front-Body Structure Using Robust Optimization.” Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 223 (9): 1133–1147. Accessed August 5, 2014. Available from: http://pid.sagepub.com/content/223/9/1133 http://pid.sagepub.com/content/223/9/1133.full.pdf