Realisation of a multi-sensor framework for process monitoring of the wire arc additive manufacturing in producing Ti-6Al-4V parts

References

• Almeida, P. S., and S. Williams. 2010. “Innovative Process Model of Ti-6Al-4V Additive Layer Manufacturing Using Cold Metal Transfer (CMT).” In Proceedings of the Twenty-First Annual International Solid Freeform Fabrication Symposium. Austin, TX, USA: University of Texas at Austin.
   Google Scholar
• Bai, X., H. Zhang, and G. Wang. 2013. “Improving Prediction Accuracy of Thermal Analysis for Weld-Based Additive Manufacturing by Calibrating Input Parameters Using IR Imaging.” International Journal of Advanced Manufacturing Technology 69 (5–8): 1087–1095. doi:10.1007/s00170-013-5102-y.
   Web of Science ®Google Scholar
• Baufeld, B., E. Brandl, and O. Van der Biest. 2011. “Wire Based Additive Layer Manufacturing: Comparison of Microstructure and Mechanical Properties of Ti-6Al-4V Components Fabricated by Laser-Beam Deposition and Shaped Metal Deposition.” Journal of Materials Processing Technology 211 (6): 1146–1158. doi:10.1016/j.jmatprotec.2011.01.018.
   Web of Science ®Google Scholar
• Baufeld, B., O. Van der Biest, and R. Gault. 2010. “Additive Manufacturing of Ti-6Al-4V Components by Shaped Metal Deposition: Microstructure and Mechanical Properties.” Materials and Design 31 (SUPPL. 1): S106–11. Elsevier Ltd. doi:10.1016/j.matdes.2009.11.032.
   Web of Science ®Google Scholar
• Besl, P., and N. McKay. 1992. “A Method for Registration of 3-D Shapes.” IEEE Transactions on Pattern Analysis and Machine Intelligence. doi:10.1109/34.121791.
   Web of Science ®Google Scholar
• BSI. 2015. BSI Standards Publication Additive Manufacturing — General Principles Part 2: Overview of Process Categories and Feedstock. ISO/ASTM International 2015.
   Google Scholar
• Chen, B., J. Wang, and S. Chen. 2010. “A Study on Application of Multi-Sensor Information Fusion in Pulsed GTAW.” Industrial Robot: An International Journal 37 (2): 168–176. doi:10.1108/01439911011018948.
   Web of Science ®Google Scholar
• Colegrove, P. A., A. R. McAndrew, J. Ding, F. Martina, P. Kurzynski, and S. Williams. 2016. “System Architectures for Large Scale Wire + Arc Additive Manufacture.” 10th International Conference on Trends in Welding Research, no. October 2016.
   Google Scholar
• Colegrove, P. A., F. Martina, M. J. Roy, B. A. Szost, S. Terzi, S. W. Williams, P. J. Withers, and D. Jarvis. 2014. “High Pressure Interpass Rolling of Wire + Arc Additively Manufactured Titanium Components.” Advanced Materials Research 996: 694–700. doi:10.4028/www.scientific.net/AMR.996.
   Google Scholar
• Colegrove, P. A., H. E. Coules, J. Fairman, F. Martina, T. Kashoob, H. Mamash, and L. D. Cozzolino. 2013. “Microstructure and Residual Stress Improvement in Wire and Arc Additively Manufactured Parts through High-Pressure Rolling.” Journal of Materials Processing Technology 213 (10): 1782–1791. doi:10.1016/j.jmatprotec.2013.04.012.
   Web of Science ®Google Scholar
• Cong, B., J. Ding, and S. Williams. 2014. “Effect of Arc Mode in Cold Metal Transfer Process on Porosity of Additively Manufactured Al-6.3%Cu Alloy.” International Journal of Advanced Manufacturing Technology 76 (9–12): 1593–1606. doi:10.1007/s00170-014-6346-x.
   Web of Science ®Google Scholar
• Ding, D., Z. Pan, D. Cuiuri, and H. Li. 2015a. “Wire-Feed Additive Manufacturing of Metal Components: Technologies, Developments and Future Interests.” The International Journal of Advanced Manufacturing Technology 81 (14): 465–481. doi:10.1007/s00170-015-7077-3.
   Google Scholar
• Ding, J., P. Colegrove, F. Martina, S. Williams, R. Wiktorowicz, and M. R. Palt. 2015b. “Development of A Laminar Flow Local Shielding Device for Wire+ Arc Additive Manufacture.” Journal of Materials Processing Technology 226: 99–105. doi:10.1016/j.jmatprotec.2015.07.005.
   Web of Science ®Google Scholar
• Ding, J., P. Colegrove, J. Mehnen, S. Ganguly, P. M. Sequeira Almeida, F. Wang, and S. Williams. 2011. “Thermo-Mechanical Analysis of Wire and Arc Additive Layer Manufacturing Process on Large Multi-Layer Parts.” Computational Materials Science 50 (12): 3315–3322.
   Web of Science ®Google Scholar
• DuPont, J. N., and A. R. Marder. 1995. “Thermal Efficiency of Arc Welding Processes.” Welding Journal-Including Welding Research Supplement 74 (12): 406s.
   Web of Science ®Google Scholar
• Everton, S. K., M. Hirsch, P. Stravroulakis, R. K. Leach, and A. T. Clare. 2016. “Review of in-Situ Process Monitoring and in-Situ Metrology for Metal Additive Manufacturing.” Materials and Design 95: 431–445. doi:10.1016/j.matdes.2016.01.099.
   Web of Science ®Google Scholar
• Faragher, R. 2012. “Understanding the Basis of the Kalman Filter via a Simple and Intuitive Derivation [Lecture Notes].” IEEE Signal processing magazine 29 (5): 128-132.
   Web of Science ®Google Scholar
• Frazier, W. E. 2014. “Metal Additive Manufacturing: A Review.” Journal of Materials Engineering and Performance 23 (6): 1917–1928. doi:10.1007/s11665-014-0958-z.
   Web of Science ®Google Scholar
• Heralić, A. 2009. Monitoring and Control of Robotized Laser Metal-Wire Deposition. Chalmers University of Technology. https://www.diva-portal.org/smash/get/diva2:287573/FULLTEXT01.pdf
   Google Scholar
• Hussein, A., L. Hao, C. Yan, R. Everson, and P. Young. 2013. “Advanced Lattice Support Structures for Metal Additive Manufacturing.” Journal of Materials Processing Technology 213 (7): 1019–1026. doi:10.1016/j.jmatprotec.2013.01.020.
   Web of Science ®Google Scholar
• Jhavar, S., N. K. Jain, and C. P. Paul. 2014. “Development of Micro-Plasma Transferred Arc (μ-PTA) Wire Deposition Process for Additive Layer Manufacturing Applications.” Journal of Materials Processing Technology 214 (5): 1102–1110. doi:10.1016/j.jmatprotec.2013.12.016.
   Web of Science ®Google Scholar
• Kahveci, A. I., and G. E. Welsch. 1991. “Hardness versus Strength Correlation for Oxygen-Strengthened Ti-6Al-4V Alloy.” Scripta METALLURGICA 25: 1957–1962. doi:10.1016/0956-716X(91)90335-X.
   Google Scholar
• Kerckhofs, G., G. Pyka, M. Moesen, S. Van Bael, J. Schrooten, and M. Wevers. 2013. “High‐Resolution Microfocus X‐Ray Computed Tomography for 3D Surface Roughness Measurements of Additive Manufactured Porous Materials.” Advanced Engineering Materials 15 (3): 153–158. doi:10.1002/adem.v15.3.
   Web of Science ®Google Scholar
• Lü, F., H. Chen, C. Fan, and S. Chen. 2010. “A Novel Control Algorithm for Weld Pool Control.” Industrial Robot: An International Journal 37 (1): 89–96. doi:10.1108/01439911011009993.
   Web of Science ®Google Scholar
• Lin, J. J., Y. H. Lv, Y. X. Liu, B. S. Xu, Z. Sun, Z. G. Li, and Y. X. Wu. 2016. “Microstructural Evolution and Mechanical Properties of Ti-6Al-4V Wall Deposited by Pulsed Plasma Arc Additive Manufacturing.” Materials & Design 102: 30–40. doi:10.1016/j.matdes.2016.04.018.
   Web of Science ®Google Scholar
• Martina, F., P. A. Colegrove, S. W. Williams, and J. Meyer. 2015. “Microstructure of Interpass Rolled Wire+ Arc Additive Manufacturing Ti-6Al-4V Components.” Metallurgical and Materials Transactions A 46 (12): 6103–6118. doi:10.1007/s11661-015-3172-1.
   Google Scholar
• Mireles, J., C. Terrazas, F. Medina, R. Wicker, and E. Paso. 2013. “Automatic Feedback Control in Electron Beam Melting Using Infrared Thermography.” In Proceedings of the Solid Freeform Fabrication Symposium. https://sffsymposium.engr.utexas.edu/Manuscripts/2013/2013-57-Mireles.pdf
   Google Scholar
• Pal, K., S. Bhattacharya, and S. K. Pal. 2010. “Investigation on Arc Sound and Metal Transfer Modes for On-Line Monitoring in Pulsed Gas Metal Arc Welding.” Journal of Materials Processing Technology 210 (10): 1397–1410. doi:10.1016/j.jmatprotec.2010.03.029.
   Web of Science ®Google Scholar
• Polajnar, I., Z. Bergant, and J. Grum. 2013. “Arc Welding Process Monitoring by Audible Sound.” 12th International Conference of the Slovenian Society for Non-Destructive Testing: Application of Contemporary Non-Destructive Testing in Engineering, ICNDT 2013 - Conference Proceedings, 613–620.
   Google Scholar
• Reuters. 2017 Printed Titanium Parts Expected to Save Millions in Boeing Dreamliner Costs. http://www.reuters.com/article/us-norsk-boeing-idUSKBN17C264
   Google Scholar
• Rusu, R., and S. Cousins. 2011. “3D Is Here: Point Cloud Library (PCL).” In Robotics and Automation (ICRA), 2011 IEEE International Conference, 1–4. IEEE.
   Google Scholar
• Slotwinski, J. A., E. J. Garboczi, and K. M. Hebenstreit. 2014. “Porosity Measurements and Analysis for Metal Additive Manufacturing Process Control.” Journal of Research of the National Institute of Standards and Technology 119 (1): 494–529. doi:10.6028/jres.119.019.
   PubMedGoogle Scholar
• Taminger, K., and R. A. Hafley. 2003. “Electron Beam Freeform Fabrication: A Rapid Metal Deposition Process.” Proceedings of the 3rd Annual Automotive Composites Conference, 9–10.
   Google Scholar
• Taminger, K. M., J. K. Watson, R. A. Hafley, and D. D. Petersen. 2007. “Solid freeform fabrication apparatus and methods.” U.S. Patent 7,168,935, issued January 30, 2007.
   Google Scholar
• Taminger, K. M., and R. A. Hafley. 2006. “Electron beam freeform fabrication for cost effective near-net shape manufacturing.” NATO Unclassified.
   Google Scholar
• Thompson, A., I. Maskery, and R. K. Leach. 2016. “X-Ray Computed Tomography for Additive Manufacturing: A Review.” Measurement Science and Technology 27 (7): 72001. doi:10.1088/0957-0233/27/7/072001.
   Web of Science ®Google Scholar
• Cranfield University. 2016. “Is this the largest metal 3D part ever made?” Cranfield University Website. https://www.cranfield.ac.uk/press/news-2016/is-this-the-largest-metal--3d-part-ever-made
   Google Scholar
• Unocic, R. R., and J. N. DuPont. 2004. “Process Efficiency Measurements in the Laser Engineered Net Shaping Process.” Metallurgical and Materials Transactions B 35 (1): 143–152. doi:10.1007/s11663-004-0104-7.
   Web of Science ®Google Scholar
• Wang, Y., and P. Zhao. 2001. “Noncontact Acoustic Analysis Monitoring of Plasma Arc Welding.” International Journal of Pressure Vessels and Piping 78 (1): 43–47. doi:10.1016/S0308-0161(00)00085-5.
   Web of Science ®Google Scholar
• Węglowski, M. S. 2012. Monitoring of Arc Welding Process Based on Arc Light Emission. In Welding Processes. Intech.
   Google Scholar
• Williams, S. W., F. Martina, A. C. Addison, J. Ding, G. Pardal, and P. Colegrove. 2016. “Wire+ Arc Additive Manufacturing.” Materials Science and Technology 32 (7): 641–647. doi:10.1179/1743284715Y.0000000073.
   Web of Science ®Google Scholar
• Wohlers Associates, Inc. 2016. Wohlers Report 2016. Wohlers Associates, Inc.
   Google Scholar
• Wu, C. S., L. Wang, W. J. Ren, and X. Y. Zhang. 2014. “Plasma Arc Welding: Process, Sensing, Control and Modelling.” Journal of Manufacturing Processes 16 (1): 74–85. doi:10.1016/j.jmapro.2013.06.004.
   Web of Science ®Google Scholar
• Xiong, J., and G. Zhang. 2013. “Online Measurement of Bead Geometry in GMAW-Based Additive Manufacturing Using Passive Vision.” Measurement Science and Technology 24 (11): 115103. doi:10.1088/0957-0233/24/11/115103.
   Web of Science ®Google Scholar
• Xiong, J., G. Zhang, Z. Qiu, and Y. Li. 2013. “Vision-Sensing and Bead Width Control of a Single-Bead Multi-Layer Part: Material and Energy Savings in GMAW-Based Rapid Manufacturing.” Journal of Cleaner Production 41: 82–88. doi:10.1016/j.jclepro.2012.10.009.
   Web of Science ®Google Scholar
• Xiong, J., Y. Lei, H. Chen, and G. Zhang. 2017. “Fabrication of Inclined Thin-Walled Parts in Multi-Layer Single-Pass GMAW-Based Additive Manufacturing with Flat Position Deposition.” Journal of Materials Processing Technology 240: 397–403. doi:10.1016/j.jmatprotec.2016.10.019.
   Web of Science ®Google Scholar
• Xiong, J., Z. Yin, and W. Zhang. 2016. “Closed-loop Control of Variable Layer Width for Thin-walled Parts in Wire and Arc Additive Manufacturing.” Journal of Materials Processing Technology 233: 100-106.
   Web of Science ®Google Scholar
• Yu, H., Y. Xu, J. Song, J. Pu, X. Zhao, and G. Yao. 2015. “On-Line Monitor of Hydrogen Porosity Based on Arc Spectral Information in Al–Mg Alloy Pulsed Gas Tungsten Arc Welding.” Optics & Laser Technology 70: 30–38. doi:10.1016/j.optlastec.2015.01.010.
   Web of Science ®Google Scholar
• Yu, H., Z. Ye, and S. Chen. 2013. “Application of Arc Plasma Spectral Information in the Monitor of Al-Mg Alloy Pulsed GTAW Penetration Status Based on Fuzzy Logic System.” International Journal of Advanced Manufacturing Technology 68 (9–12): 2713–2727. doi:10.1007/s00170-013-4877-1.
   Web of Science ®Google Scholar
• Zhang, Y., Edited. 2008. Real-Time Weld Process Monitoring. Elsevier. ISBN: 978-1-84569-268-1
   Google Scholar