References
- Alaimo, A., A. Esposito, C. Orlando, and A. Simoncini. 2020. “Aircraft Pilots Workload Analysis: Heart Rate Variability Objective Measures and Nasa-Task Load Index Subjective Evaluation.” Aerospace 7 (9): 137. doi:https://doi.org/10.3390/aerospace7090137.
- Alam, M. F., S. Katsikas, O. Beltramello, and S. Hadjiefthymiades. 2017. “Augmented and Virtual Reality Based Monitoring and Safety System: A Prototype IoT Platform.” Journal of Network and Computer Applications 89: 109–119. doi:https://doi.org/10.1016/j.jnca.2017.03.022.
- Altieri, A., S. Ceccacci, A. Talipu, and M. Mengoni. 2020. “A Low Cost Motion Analysis System Based on RGB Cameras to Support Ergonomic Risk Assessment in Real Workplaces.” In International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, (Vol. 83983, pp. V009T09A067). American Society of Mechanical Engineers.
- Argyle, E. M., A. Marinescu, M. L. Wilson, G. Lawson, and S. Sharples. 2021. “Physiological Indicators of Task Demand, Fatigue, and Cognition in Future Digital Manufacturing Environments.” International Journal of Human-Computer Studies 145: 102522. doi:https://doi.org/10.1016/j.ijhcs.2020.102522.
- Biondi, F. N., A. Cacanindin, C. Douglas, and J. Cort. 2020. “Overloaded and at Work: Investigating the Effect of Cognitive Workload on Assembly Task Performance.” Human Factors, 63(05), 0018720820929928.
- Bordegoni, M., and F. Ferrise. 2013. “Designing Interaction with Consumer Products in a Multisensory Virtual Reality Environment: This Paper Shows How Virtual Reality Technology Can Be Used Instead of Physical Artifacts or Mock-Ups for the New Product and Evaluation of Its Usage.” Virtual and Physical Prototyping 8 (1): 51–64. doi:https://doi.org/10.1080/17452759.2012.762612.
- Brookhuis, K. A., and D. de Waard. 2010. “Monitoring Drivers’ Mental Workload in Driving Simulators Using Physiological Measures.” Accident Analysis & Prevention 42 (3): 898–903. doi:https://doi.org/10.1016/j.aap.2009.06.001.
- Bu, L., C.-H. Chen, K. K. H. Ng, P. Zheng, G. Dong, and H. Liu. 2021. “A User-Centric Design Approach for Smart Product-Service Systems Using Virtual Reality: A Case Study.” Journal of Cleaner Production 280: 124413. doi:https://doi.org/10.1016/j.jclepro.2020.124413.
- Caputo, F., A. Greco, E. D’Amato, I. Notaro, and S. Spada. 2018. “On the Use of Virtual Reality for a Human-Centered Workplace Design.” Procedia Structural Integrity 8: 297–308. doi:https://doi.org/10.1016/j.prostr.2017.12.031.
- Czerniak, J. N., N. Schierhorst, V. Villani, L. Sabattini, C. Brandl, A. Mertens, M. Schwalm, and V. Nitsch. 2021. “The Index of Cognitive Activity-Eligibility for Task-Evoked Informational Strain and Robustness Towards Visual Influences.” Applied Ergonomics 92: 103342. doi:https://doi.org/10.1016/j.apergo.2020.103342.
- Dempsey, P. G. 2002. “Usability of the Revised NIOSH Lifting Equation.” Ergonomics 45 (12): 817–828. doi:https://doi.org/10.1080/00140130210159977.
- Dimitrokalli, A., G.-C. Vosniakos, D. Nathanael, and E. Matsas. 2020. “On the Assessment of Human-Robot Collaboration in Mechanical Product Assembly by Use of Virtual Reality.” Procedia Manufacturing 51: 627–634. doi:https://doi.org/10.1016/j.promfg.2020.10.088.
- Engström, T., and P. Medbo. 1997. “Data Collection and Analysis of Manual Work Using Video Recording and Personal Computer Techniques.” International Journal of Industrial Ergonomics 19 (4): 291–298. doi:https://doi.org/10.1016/S0169-8141(96)00038-8.
- Fowler, A., D. Golightly, S. Sharples, C. Harvey, M. Wilson, and H. Gibson. n.d. “Human Performance in Rail: Current Assessment and Future Opportunities.”
- Gong, L., H. Söderlund, L. Bogojevic, X. Chen, A. Berce, Å. Fast-Berglund, and B. Johansson. 2020. “Interaction Design for Multi-User Virtual Reality Systems: An Automotive Case Study.” Procedia Cirp 93: 1259–1264. doi:https://doi.org/10.1016/j.procir.2020.04.036.
- Gordon, C. C., C. L. Blackwell, B. Bradtmiller, J. L. Parham, P. Barrientos, S. P. Paquette, B. D. Corner, J. M. Carson, J. C. Venezia, and B. M. Rockwell. 2014. “2012 Anthropometric Survey of Us Army Personnel: Methods and Summary Statistics.” Army Natick Soldier Research Development and Engineering Center MA.
- Grajewski, D., F. Górski, P. Zawadzki, and A. Hamrol. 2013. “Application of Virtual Reality Techniques in Design of Ergonomic Manufacturing Workplaces.” Procedia Computer Science 25: 289–301. doi:https://doi.org/10.1016/j.procs.2013.11.035.
- Grandi, F., L. Zanni, M. Peruzzini, M. Pellicciari, and C. E. Campanella. 2019. “A Transdisciplinary Digital Approach for Tractor’s Human-Centred Design.” International Journal of Computer Integrated Manufacturing. doi:https://doi.org/10.1080/0951192X.2019.1599441.
- Gregori, F., A. Papetti, M. Pandolfi, M. Peruzzini, and M. Germani. 2018. “Improving a Production Site from a Social Point of View: An IoT Infrastructure to Monitor Workers Condition.” Procedia CIRP 72: 886–891. doi:https://doi.org/10.1016/j.procir.2018.03.057.
- Hart, S. G., and L. E. Staveland. 1988. “Development of NASA-TLX (Task Load Index): Results of Empirical and Theoretical Research.” Advances in Psychology 52 (C): 139–183. doi:https://doi.org/10.1016/S0166-4115(08)62386-9.
- Hassenzahl, M., and N. Tractinsky. 2006. “User Experience-a Research Agenda.” Behaviour & Information Technology 25 (2): 91–97. doi:https://doi.org/10.1080/01449290500330331.
- Hill, S. G., H. P. Iavecchia, J. C. Byers, A. C. Bittner Jr, A. L. Zaklade, and R. E. Christ. 1992. “Comparison of Four Subjective Workload Rating Scales.” Human Factors 34 (4): 429–439. doi:https://doi.org/10.1177/001872089203400405.
- Hu, S., and G. Zheng. 2009. “Driver Drowsiness Detection with Eyelid Related Parameters by Support Vector Machine.” Expert Systems with Applications 36 (4): 7651–7658. doi:https://doi.org/10.1016/j.eswa.2008.09.030.
- International Organization for Standardization. 2019. ISO 9241-210 - Ergonomics of Human-system Interaction - Part 210: Human-centred design for interactive systems, issued 2019.
- Izquierdo-Reyes, J., R. A. Ramirez-Mendoza, M. R. Bustamante-Bello, S. Navarro-Tuch, and R. Avila-Vazquez. 2018. “Advanced Driver Monitoring for Assistance System (ADMAS).” International Journal on Interactive Design and Manufacturing (Ijidem) 12 (1): 187–197. doi:https://doi.org/10.1007/s12008-016-0349-9.
- Javaid, M., and A. Haleem. 2020. “Virtual Reality Applications toward Medical Field.” Clinical Epidemiology and Global Health 8 (2): 600–605. doi:https://doi.org/10.1016/j.cegh.2019.12.010.
- Jordan, B., and A. Henderson. 1995. “Interaction Analysis: Foundations and Practice.” The Journal of the Learning Sciences 4 (1): 39–103. doi:https://doi.org/10.1207/s15327809jls0401_2.
- Karhu, O., R. Härkönen, P. Sorvali, and P. Vepsäläinen. 1981. “Observing Working Postures in Industry: Examples of OWAS Application.” Applied Ergonomics 12 (1): 13–17. doi:https://doi.org/10.1016/0003-6870(81)90088-0.
- Kissmann, U. 2009. Video Interaction Analysis: Methods and Methodology.Lang, Peter Lang Pub Inc, UK.
- Kramer, A. R. T. H. U. R. F., and T. Weber. 2000. “Applications of Psychophysiology to Human Factors.” Handbook of Psychophysiology 2: 794–814.
- Krehl, C., and N. Balfe. 2014. “Cognitive Workload Analysis in Rail Signalling Environments.” Cognition, Technology & Work 16 (3): 359–371. doi:https://doi.org/10.1007/s10111-013-0266-7.
- Liao, W., W. Zhang, Z. Zhu, and J. Qiang 2006. “A Real-Time Human Stress Monitoring System Using Dynamic Bayesian Network.” 2005 IEEE Computer Society Conference on Computer Vision and Pattern Recognition (CVPR’05) - Workshops. IEEE (pp. 70). San Diego, CA, USA doi:https://doi.org/10.1109/cvpr.2005.394.
- Makris, S., L. Rentzos, G. Pintzos, D. Mavrikios, and G. Chryssolouris. 2012. “Semantic-Based Taxonomy for Immersive Product Design Using VR Techniques.” CIRP Annals 61 (1): 147–150. doi:https://doi.org/10.1016/j.cirp.2012.03.008.
- Marquart, G., C. Cabrall, and J. De Winter. 2015. “Review of Eye-Related Measures of Drivers’ Mental Workload.” Procedia Manufacturing 3: 2854–2861. doi:https://doi.org/10.1016/j.promfg.2015.07.783.
- Martin, C., J. Cegarra, and P. Averty. 2011. “Analysis of Mental Workload during En-Route Air Traffic Control Task Execution Based on Eye-Tracking Technique.” In International Conference on Engineering Psychology and Cognitive Ergonomics, 592–597. Orlando, FL, USA. Springer.
- McAtamney, L., and S. Hignett. 2004. “Rapid Entire Body Assessment.” Handbook of Human Factors and Ergonomics Methods 31: 8@1@811. doi:https://doi.org/10.1201/9780203489925.ch8.
- McAtamney, L., and E. Nigel Corlett. 1993. “RULA: A Survey Method for the Investigation of Work-Related Upper Limb Disorders.” Applied Ergonomics 24 (2): 91–99. doi:https://doi.org/10.1016/0003-6870(93)90080-S.
- Mulder, L., J. M. Ben, D. de Waard, and K. A. Brookhuis. 2004. “Estimating Mental Effort Using Heart Rate and Heart Rate Variability.” In Handbook of Human Factors and Ergonomics Methods, 227–236. CRC Press.
- Nardolillo, A. M., A. Baghdadi, and L. A. Cavuoto. 2017. “Heart Rate Variability during a Simulated Assembly Task; Influence of Age and Gender.” In Proceedings of the Human Factors and Ergonomics Society Annual Meeting, (Vol. 61, pp. 1853–1857).SAGE Publications Sage CA: Los Angeles, CA.
- Nielsen, J. 1994. Usability Engineering. Morgan Kaufmann.
- Papetti, A., F. Gregori, M. Pandolfi, M. Peruzzini, and M. Germani. 2021. “A Method to Improve Workers’ Well-Being toward Human-Centered Connected Factories.” Journal of Computational Design and Engineering 7 (5): 630–643. doi:https://doi.org/10.1093/jcde/qwaa047.
- Pedram, S., S. Palmisano, R. Skarbez, P. Perez, and M. Farrelly. 2020. “Investigating the Process of Mine Rescuers’ Safety Training with Immersive Virtual Reality: A Structural Equation Modelling Approach.” Computers & Education 153: 103891. doi:https://doi.org/10.1016/j.compedu.2020.103891.
- Peruzzini, M., F. Grandi, S. Cavallaro, and M. Pellicciari. 2020. “Using Virtual Manufacturing to Design Human-Centric Factories: An Industrial Case.” International Journal of Advanced Manufacturing Technology. doi:https://doi.org/10.1007/s00170-020-06229-2.
- Peruzzini, M., F. Grandi, and M. Pellicciari. 2018. “How to Analyse the Workers’ Experience in Integrated Product-Process Design.” Journal of Industrial Information Integration 12 (December): 31–46. doi:https://doi.org/10.1016/j.jii.2018.06.002.
- Peruzzini, M., F. Grandi, and M. Pellicciari. 2020. “Exploring the Potential of Operator 4.0 Interface and Monitoring.” Computers & Industrial Engineering 139 (December 2018): 105600. doi:https://doi.org/10.1016/j.cie.2018.12.047.
- Peruzzini, M., F. Grandi, M. Pellicciari, and C. Campanella. 2017. “Virtual Maintenance Simulation for Socially Sustainable Serviceability.” Procedia Manufacturing 11 (June): 1413–1420. doi:https://doi.org/10.1016/j.promfg.2017.07.271.
- Peruzzini, M., F. Grandi, M. Pellicciari, and C. E. Campanella. 2018. “User Experience Analysis Based on Physiological Data Monitoring and Mixed Prototyping to Support Human-Centre Product Design.” In International Conference on Applied Human Factors and Ergonomics (pp. 401–412). Orlando, FL, USA. Springer.
- Peruzzini, M., and M. Pellicciari. 2017. “A Framework to Design A Human-Centred Adaptive Manufacturing System for Aging Workers.” Advanced Engineering Informatics 33: 330–349. doi:https://doi.org/10.1016/j.aei.2017.02.003.
- Peruzzini, M., and M. Pellicciari. 2018. “User Experience Evaluation Model for Sustainable Manufacturing.” International Journal of Computer Integrated Manufacturing 31 (6): 494–512. doi:https://doi.org/10.1080/0951192X.2017.1305502.
- Peruzzini, M., M. Pellicciari, and M. Gadaleta. 2019. “A Comparative Study on Computer-Integrated Set-Ups to Design Human-Centred Manufacturing Systems.” Robotics and Computer-Integrated Manufacturing 55: 265–278. doi:https://doi.org/10.1016/j.rcim.2018.03.009.
- Peruzzini, M., M. Tonietti, and C. Iani. 2019a. “Transdisciplinary Design Approach Based on Driver’s Workload Monitoring.” Journal of Industrial Information Integration 15: 91–102. doi:https://doi.org/10.1016/j.jii.2019.04.001.
- Rahman, M. N. A., M. R. A. Rani, and M. J. Rohani. 2011. “WERA: An Observational Tool Develop to Assess the Physical Risk Factor Associated with WRMDs. Part 1 Development Process.” International Journal of Occupational Safety and Ergonomics., .
- Rauch, E., D. T. Matt, C. A. Brown, W. Towner, A. Vickery, and S. Santiteerakul. 2018. “Transfer of Industry 4.0 To Small and Medium Sized Enterprises.” Advances in Transdisciplinary Engineering 7: 63–71.
- Rouse, W. B., S. L. Edwards, and J. M. Hammer. 1993. “Modeling the Dynamics of Mental Workload and Human Performance in Complex Systems.” IEEE Transactions on Systems, Man, and Cybernetics 23 (6): 1662–1671. doi:https://doi.org/10.1109/21.257761.
- Sharma, N., and T. Gedeon. 2012. “Objective Measures, Sensors and Computational Techniques for Stress Recognition and Classification: A Survey.” Computer Methods and Programs in Biomedicine 108 (3): 1287–1301. doi:https://doi.org/10.1016/j.cmpb.2012.07.003.
- Stark, R., S. Kind, and S. Neumeyer. 2017. “Innovations in Digital Modelling for Next Generation Manufacturing System Design.” CIRP Annals 66 (1): 169–172. doi:https://doi.org/10.1016/j.cirp.2017.04.045.
- Tilley, A. R. 2001. The Measure of Man and Woman: Human Factors in Design. John Wiley & Sons.
- Tsao, L., M. A. Nussbaum, S. Kim, and M. Liang. 2020. “Modelling Performance during Repetitive Precision Tasks Using Wearable Sensors: A Data-Driven Approach.” Ergonomics 63 (7): 831–849. doi:https://doi.org/10.1080/00140139.2020.1759700.
- Weidner, R., N. Kong, and J. P. Wulfsberg. 2013. “Human Hybrid Robot: A New Concept for Supporting Manual Assembly Tasks.” Production Engineering 7 (6): 675–684. doi:https://doi.org/10.1007/s11740-013-0487-x.
- Wickens, C. D., J. G. Hollands, S. Banbury, and R. Parasuraman. 2015. Engineering Psychology and Human Performance. Psychology Press.
- Wognum, N., C. Bil, F. Elgh, M. Peruzzini, J. Stjepandić, and W. Verhagen. 2018. “Transdisciplinary Engineering Research Challenges.” In 25th ISPE International Conference on Transdisciplinary EngineeringIntegrating (TE2018), 3-6 July, Modena, Italy (pp. 753–762). IOS Press.
- Young, M. S., K. A. Brookhuis, C. D. Wickens, and P. A. Hancock. 2015. “State of Science: Mental Workload in Ergonomics.” Ergonomics 58 (1): 1–17. doi:https://doi.org/10.1080/00140139.2014.956151.