References
- Aboulissane, B., D. E. Haiek, and L. El Bakkali. 2018. “3-UPU Robotic Mechanism Performance Evaluation through Kinematic Indexes.” Procedia Manufacturing 22: 468–475. doi:https://doi.org/10.1016/j.promfg.2018.03.072.
- Anvari, Z., P. Ataei, and M. T. Masouleh. 2019. “Collision-free Workspace and Kinetostatic Performances of a 4-DOF Delta Parallel Robot.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 (2): 99. doi:https://doi.org/10.1007/s40430-019-1605-2.
- Ataei, P., Z. Anvari, and M. T. Masouleh. 2017. “Kinetostatic Performance and Collision-free Workspace Analysis of a 3-DOF Delta Parallel Robot.” 5th RSI International Conference on Robotics and Mechatronics (ICRoM), 576–581. IEEE. doi:https://doi.org/10.1109/ICRoM.2017.8466178.
- Balaji, K., and B. S. H. Khan. 2018. “Kinematic Analysis and Performance Evaluation of Novel PRS Parallel Mechanism.” IOP Conference Series: Materials Science and Engineering, Vol. 310, 012007. doi:https://doi.org/10.1088/1757-899X/310/1/012007/pdf.
- Bonev, I. A., and C. M. M. Gosselin. 2002. “Geometric Algorithms for the Computation of the Constant-orientation Workspace and Singularity Surfaces of a Special 6-RUS Parallel Manipulator.” International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 36533: 505–514. doi:https://doi.org/10.1115/DETC2002/MECH-34257.
- Briot, S., and I. A. Bonev. 2010. “Accuracy Analysis of 3T1R Fully-parallel Robots.” Mechanism and Machine Theory 45 (5): 695–706. doi:https://doi.org/10.1016/j.mechmachtheory.2009.04.002.
- Cardou, P., S. Bouchard, and C. Gosselin. 2010. “Kinematic-sensitivity Indices for Dimensionally Nonhomogeneous Jacobian Matrices.” IEEE Transactions on Robotics 26 (1): 166–173. doi:https://doi.org/10.1109/TRO.2009.2037252.
- Chablat, D., L. Baron, and R. Jha. 2017. “Kinematics and Workspace Analysis of a 3ppps Parallel Robot with U-shaped Base.” International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, American Society of Mechanical Engineers, Vol. 58189, V05BT08A065. doi:https://doi.org/10.1115/DETC2017-67087.
- Cui, G., M. Sun, W. Meng, H. Zhang, and C. Sun. 2015. “The Research of Kinematic Performances of 3-UPU-UPU Parallel Mechanism for Automobile Assembly Line.” IEEE International Conference on Mechatronics and Automation (ICMA), 2514–2520. doi:https://doi.org/10.1109/ICMA.2015.7237882.
- Dash, A. K., I.-M. Chen, S. H. Yeo, and G. Yang. 2005. “Workspace Generation and Planning Singularity-free Path for Parallel Manipulators.” Mechanism and Machine Theory 40 (7): 776–805. doi:https://doi.org/10.1016/j.mechmachtheory.2005.01.001.
- Dragos, A., P. Marius, M. Lucian, and F. Marian. 2012. “Determining the Workspace Shape of a Robot with Delta 3d of Parallel Structure.” Journal of Engineering Studies and Research 18 (4): 20. http://pubs.ub.ro/dwnl.php?id=JESR201204V18S01A0002.
- Durmuş, B., H. Temurtaş, N. Yumuşak, and F. Temurtaş. 2009. “A Study on Industrial Robotic Manipulator Model Using Model Based Predictive Controls.” Journal of Intelligent Manufacturing 20 (2): 233–241. doi:https://doi.org/10.1007/s10845-008-0221-2.
- Elkady, A. Y., M. Mohammed, and T. Sobh. 2010. “A New Algorithm for Measuring and Optimizing the Manipulability Index.” Journal of Intelligent and Robotic Systems 59 (1): 75–86. doi:https://doi.org/10.1007/s10846-009-9388-9.
- Gharahsofloo, A., and A. Rahmani. 2015. “An Efficient Algorithm for Workspace Generation of Delta Robot.” 48–53. https://www.sid.ir/en/Journal/ViewPaper.aspx?ID=504282
- Gosselin, C., and J. Angeles. 1990. “Singularity Analysis of Closed-loop Kinematic Chains.” IEEE Transactions on Robotics and Automation 6 (3): 281–290. doi:https://doi.org/10.1109/70.56660.
- Gosselin, C., and J. Angeles. 1991. “A Global Performance Index for the Kinematic Optimization of Robotic Manipulators.” 220–226. doi:https://doi.org/10.1115/1.2912772.
- Gosselin, C., and L.-T. Schreiber. 2016. “Kinematically Redundant Spatial Parallel Mechanisms for Singularity Avoidance and Large Orientational Workspace.” IEEE Transactions on Robotics 32 (2): 286–300. doi:https://doi.org/10.1109/TRO.2016.2516025.
- Gutiérrez-Preciado, A., M. A. González-Palacios, and L. A. Aguilera-Cortés. 2015. “Workspace Analysis of a Delta-Like Robot Using an Alternative Approach.” Multibody Mechatronic Systems 453–463. Springer, Cham. doi:https://doi.org/10.1007/978-3-319-09858-6_43.
- Hamdoun, O., L. El Bakkali, and F. Z. Baghli. 2017. “Analysis and Optimum Kinematic Design of a Parallel Robot.” Procedia Engineering 181: 214–220. doi:https://doi.org/10.1016/j.proeng.2017.02.374.
- Haug, E. J., C.-M. Luh, F. A. Adkins, and J.-Y. Wang. 1996. “Numerical Algorithms for Mapping Boundaries of Manipulator Workspaces.” 228–234. doi:https://doi.org/10.1115/DETC1994-0156.
- Huang, T., P. Bai, J. Mei, and D. G. Chetwynd. 2016. “Tolerance Design and Kinematic Calibration of a Four-degrees-of-freedom Pick-and-place Parallel Robot.” Journal of Mechanisms and Robotics 8 (6). doi:https://doi.org/10.1115/1.4034788.
- Jha, R., D. Chablat, F. Rouillier, and G. Moroz. 2016. “Workspace and Singularity Analysis of a Delta like Family Robot.” Robotics and Mechatronics 121–130. Springer, Cham. doi:https://doi.org/10.1007/978-3-319-22368-1_12.
- Jiang, Y., T. Li, L. Wang, and F. Chen. 2018. “Kinematic Error Modeling and Identification of the Over-constrained Parallel Kinematic Machine.” Robotics and Computer-Integrated Manufacturing 49: 105–119. doi:https://doi.org/10.1016/j.rcim.2017.06.001.
- Khan, S., K. Andersson, and J. Wikander. 2015. “Jacobian Matrix Normalization-a Comparison of Different Approaches in the Context of Multi-objective Optimization of 6-dof Haptic Devices.” Journal of Intelligent & Robotic Systems 79 (1): 87–100. doi:https://doi.org/10.1007/s10846-014-0147-1.
- Kim, J.-O., and K. Khosla. 1991. “Dexterity Measures for Design and Control of Manipulators.” Proceedings IROS’91: IEEE/RSJ International Workshop on Intelligent Robots and Systems’, Vol. 91, 758–763. IEEE. doi:https://doi.org/10.1109/IROS.1991.174572.
- Klein, C. A., and B. E. Blaho. 1987. “Dexterity Measures for the Design and Control of Kinematically Redundant Manipulators.” The International Journal of Robotics Research 6 (2): 72–83. doi:https://doi.org/10.1177/027836498700600206.
- Kucuk, S., and Z. Bingul. 2006. “Comparative Study of Performance Indices for Fundamental Robot Manipulators.” Robotics and Autonomous Systems 54 (7): 567–573. doi:https://doi.org/10.1016/j.robot.2006.04.002.
- Laribi, M. A., L. Romdhane, and S. Zeghloul. 2007. “Analysis and Dimensional Synthesis of the DELTA Robot for a Prescribed Workspace.” Mechanism and Machine Theory 42 (7): 859–870. doi:https://doi.org/10.1016/j.mechmachtheory.2006.06.012.
- Li, W., and J. Angeles. 2017. “A Novel Three-loop Parallel Robot with Full Mobility: Kinematics, Singularity, Workspace, and Dexterity Analysis.” Journal of Mechanisms and Robotics 9 (5). doi:https://doi.org/10.1115/1.4037112.
- Li, Y., and Q. Xu. 2007. “Kinematic Analysis of a 3-PRS Parallel Manipulator.” Robotics and Computer-Integrated Manufacturing 23 (4): 395–408. doi:https://doi.org/10.1016/j.rcim.2006.04.007.
- Li, Z.-Y., D.-J. Zhao, and J.-S. Zhao. 2019. “Structure Synthesis and Workspace Analysis of a Telescopic Spraying Robot.” Mechanism and Machine Theory 133: 295–310. doi:https://doi.org/10.1016/j.mechmachtheory.2018.11.022.
- López, M., E. Castillo, G. García, and A. Bashir. 2006. “Delta Robot: Inverse, Direct, and Intermediate Jacobians.” Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 220 (1): 103–109. doi:https://doi.org/10.1243/095440606X78263.
- Lou, Y. J., G. F. Liu, and Z. X. Li. 2005. “A General Approach for Optimal Design of Parallel Manipulators.” IEEE Transactions on Automation Science and Engineering. http://ai.stanford.edu/~liugf/TRO-LLL.pdf.
- Mahboubkhah, M., M. Aliakbari, and A. Barari. 2019. “An Intelligent Self-Calibrating 4-DOF Parallel Robot for Precise Geometric Data Collection in Digital Manufacturing.” IFAC-PapersOnLine 52 (10): 323–327. doi:https://doi.org/10.1016/j.ifacol.2019.10.051.
- Mahboubkhah, M., and A. Barari. 2019. “Design and Development of a Novel 4-DOF Parallel Kinematic Coordinate Measuring Machine (CMM).” International Journal of Computer Integrated Manufacturing 32 (8): 750–760. doi:https://doi.org/10.1080/0951192X.2019.1610576.
- Mahmoodi, M., M. G. Tabrizi, and K. Alipour. 2015. “A New Approach for Kinematics-based Design of 3-RRR Delta Robots with A Specified Workspace.” AI & Robotics (IRANOPEN), 1–6. IEEE. doi:https://doi.org/10.1109/RIOS.2015.7270746.
- Masory, O., and J. Wang. 1994. “Workspace Evaluation of Stewart Platforms.” Advanced Robotics 9 (4): 443–461. doi:https://doi.org/10.1115/DETC1992-0232.
- Merlet, J.-P. 2006a. “Jacobian, Manipulability, Condition Number, and Accuracy of Parallel Robots.” ASME Journal of Mechanical Design 128: 199–206. doi:https://doi.org/10.1115/1.2121740.
- Merlet, J.-P. 2006b. Parallel Robots. Vol. 128. Springer Science & Business Media.Netherlands: Springer
- Monsarrat, B., and C. M. Gosselin. 2003. “Workspace Analysis and Optimal Design of a 3-leg 6-DOF Parallel Platform Mechanism.” IEEE Transactions on Robotics and Automation 19 (6): 954–966. doi:https://doi.org/10.1109/TRA.2003.819603.
- Patel, S., and T. Sobh. 2015. “Manipulator Performance Measures-a Comprehensive Literature Survey.” Journal of Intelligent & Robotic Systems 77 (3–4): 547–570. doi:https://doi.org/10.1007/s10846-014-0024-y.
- Pusey, J., A. Fattah, S. Agrawal, and E. Messina. 2004. “Design and Workspace Analysis of a 6–6 Cable-suspended Parallel Robot.” Mechanism and Machine Theory 39 (7): 761–778. doi:https://doi.org/10.1016/j.mechmachtheory.2004.02.010.
- Rodriguez, E., C. Riaño, A. Alvares, and R. Bonnard. 2019. “Design and Dimensional Synthesis of a Linear Delta Robot with Single Legs for Additive Manufacturing.” Journal of the Brazilian Society of Mechanical Sciences and Engineering 41 (11): 1–23. doi:https://doi.org/10.1007/s40430-019-2039-6.
- Rugbani, A., and K. Schreve. 2012. “Modelling and Analysis of the Geometrical Errors of a Parallel Manipulator micro-CMM.” International Precision Assembly Seminar, 105–117. Springer, Berlin, Heidelberg. doi:https://doi.org/10.1007/978-3-642-28163-1_14.
- Shen, G., Y. Tang, J. Zhao, H. Lu, X. Li, and G. Li. 2016. “Retracted: Jacobian Free Monotonic Descent Algorithm for Forward Kinematics of Spatial Parallel Manipulator.” Advances in Mechanical Engineering 8 (4): 1687814016645447. doi:https://doi.org/10.1177/1687814016645447.
- Staicu, S., Z. Shao, Z. Zhang, X. Tang, and L. Wang. 2018. “Kinematic Analysis of the X4 Translational–rotational Parallel Robot.” International Journal of Advanced Robotic Systems 15 (5): 1729881418803849. doi:https://doi.org/10.1177/1729881418803849.
- Stan, S.-D., M. Manic, C. Szep, and R. Balan. 2011. “Performance Analysis of 3 DOF Delta Parallel Robot.” 4th International Conference on Human System Interactions, HIS, 215–220. IEEE. doi:https://doi.org/10.1109/HSI.2011.5937369
- Szep, C., S.-D. Stan, and V. Csibi. 2011. “Design, Workspace Analysis and Inverse Kinematics Problem of Delta Parallel Robot.” Mechanics 17 (3): 296–299. doi:https://doi.org/10.5755/j01.mech.17.3.506.
- Wang, G., Y. Wang, J. Zhao, and G. Chen. 2012. “Process Optimization of the Serial-parallel Hybrid Polishing Machine Tool Based on Artificial Neural Network and Genetic Algorithm.” Journal of Intelligent Manufacturing 23 (3): 365–374. doi:https://doi.org/10.1007/s10845-009-0376-5.
- Wu, G., S. Bai, J. A. Kepler, and S. Caro. 2012. “Error Modeling and Experimental Validation of a Planar 3-PPR Parallel Manipulator with Joint Clearances.” Journal of Mechanisms and Robotics 4 (4). doi:https://doi.org/10.1115/1.4007487.
- Wu, G., and H. Dong. 2018. “Kinematics of a 6-RUU Parallel Robots with Reconfigurable Platforms.” Computational Kinematics 331–339. Springer, Cham. doi:https://doi.org/10.1007/978-3-319-60867-9_38.
- Yoshikawa, T. 1985. “Manipulability of Robotic Mechanisms.” The International Journal of Robotics Research 4 (2): 3–9. doi:https://doi.org/10.1177/027836498500400201.
- Zhang, D., L. Wang, Z. Gao, and X. Su. 2013. “On Performance Enhancement of Parallel Kinematic Machine.” Journal of Intelligent Manufacturing 24 (2): 267–276. doi:https://doi.org/10.1007/s10845-011-0583-8.
- Zheng, H., M. Cong, and D. Liu. 2016. “Workspace Analysis considering Various Parameters of the Quattro Parallel Robot.” IEEE International Conference on Robotics and Biomimetics (ROBIO), 1758–1763. IEEE. doi:https://doi.org/10.1109/ROBIO.2016.7866583.