Proposal of a maturity model for additive manufacturing: theoretical development and case study in automotive industry

References

• Alabousi, M., N. Zha, and M. N. Patlas. 2019. “Predictors of Citation Rate for Original Research Studies in the Canadian Association of Radiologists Journal.” Canadian Association of Radiologists Journal 70 (4): 383–387. https://doi.org/10.1016/j.carj.2019.06.004.
   PubMed Web of Science ®Google Scholar
• Alcácer, V., and V. Cruz-Machado. 2019. “Scanning the Industry 4.0: A Literature Review on Technologies for Manufacturing Systems.” Engineering Science and Technology, an International Journal 22 (3): 899–919. https://doi.org/10.1016/j.jestch.2019.01.006.
   Google Scholar
• Alcácer, V., C. Rodrigues, H. Carvalho, and V. Cruz-Machado. 2021. “Tracking the Maturity of Industry 4.0: The Perspective of a Real Scenario.” International Journal of Advanced Manufacturing Technology 116 (7–8): 2161–2181. https://doi.org/10.21203/rs.3.rs-200705/v1.
   PubMed Web of Science ®Google Scholar
• Becker, J., and R. P. Knackstedt 2009.“Jens Developing Maturity Models for IT Management Business & Information Systems Engineering.“ 1: 213–222. https://doi.org/10.1007/s12599-009-0044-5.
   Google Scholar
• Bibby, L., and B. Dehe. 2018. “Defining and Assessing Industry 4.0 Maturity Levels – Case of the Defence Sector.” Production Planning & Control 29 (12): 1030–1043. https://doi.org/10.1080/09537287.2018.1503355.
   Web of Science ®Google Scholar
• Birtchnell, T., T. Böhme, and R. Gorkin. 2017. “3D Printing and the Third Mission: The University in the Materialization of Intellectual Capital.” Technological Forecasting and Social Change 123 (October): 240–249. https://doi.org/10.1016/j.techfore.2016.03.014.
   Google Scholar
• Bruin, T. D., R. Freeze, U. Kulkarni, and M. Rosemann. 2005. “Understanding the Main Phases of Developing a Maturity Assessment Model.” In 16th Australasian Conference on Information Systems, 29 Nov – 2 Dec 2005, Sydney, Australia, January.
   Google Scholar
• Çam, G. 2022. Prospects of Producing Aluminum Parts by Wire Arc Additive Manufacturing (WAAM). Materials Today: Proceedings, 62: 77–85. https://doi.org/10.1016/j.matpr.2022.02.137.
   Google Scholar
• Chergui, A., K. Hadj-Hamou, and F. Vignat. 2018. “Production Scheduling and Nesting in Additive Manufacturing.” Computers and Industrial Engineering 126 (December): 292–301. https://doi.org/10.1016/j.cie.2018.09.048.
   Google Scholar
• Committee F42 on AM Technologies. 2022. March 3, 2022. https://www.astm.org/get-involved/technical-committees/committee-f42.
   Google Scholar
• Durakovic, B. 2018. “Design for Additive Manufacturing: Benefits, Trends and Challenges.” Periodicals of Engineering and Natural Sciences 6 (2): 179–191. https://doi.org/10.21533/pen.v6i2.224.
   Google Scholar
• Flores Ituarte, I., J. Partanen, and S. Khajavi. 2016. “Challenges to Implementing Additive Manufacturing in Globalised Production Environments.” International Journal of Collaborative Enterprise 5 (3/4): 232–247. https://doi.org/10.1504/IJCENT.2016.10003181.
   Google Scholar
• Franco, D., G. M. D. Ganga, L. A. de Santa-Eulalia, and M. Godinho Filho. 2020. “Consolidated and Inconclusive Effects of Additive Manufacturing Adoption: A Systematic Literature Review.” Computers & Industrial Engineering 148 (October): 106713. https://doi.org/10.1016/j.cie.2020.106713.
   Google Scholar
• Franco, D., G. Miller Devós Ganga, L. A. de Santa-Eulalia, and M. Godinho Filho. 2020. “Consolidated and Inconclusive Effects of Additive Manufacturing Adoption: A Systematic Literature Review.” Computers & Industrial Engineering 148 (October): 106713. https://doi.org/10.1016/j.cie.2020.106713.
   Google Scholar
• Ganzarain, J., and N. Errasti. 2016. “Three Stage Maturity Model in Sme’s Towards Industry 4.0.” Journal of Industrial Engineering & Management 9 (5): 1119–1128. https://doi.org/10.3926/jiem.2073.
   Google Scholar
• Gao, W., Y. Zhang, D. Ramanujan, K. Ramani, Y. Chen, C. B. Williams, C. C. L. Wang, Y. C. Shin, S. Zhang, and P. D. Zavattieri. 2015. “The Status, Challenges, and Future of Additive Manufacturing in Engineering.” Computer-Aided Design 69 (December): 65–89. https://doi.org/10.1016/j.cad.2015.04.001.
   Google Scholar
• Gibson, I. 2017. “The Changing Face of Additive Manufacturing.” Journal of Manufacturing Technology Management 28 (1): 10–17. https://doi.org/10.1108/JMTM-12-2016-0182.
   Web of Science ®Google Scholar
• Gibson, I., D. W. Rosen, and B. Stucker. 2010. “Generalized Additive Manufacturing Process Chain.” In Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing, edited by I. Gibson, D. W. Rosen, and B. Stucker, 59–77. Boston: Springer US. https://doi.org/10.1007/978-1-4419-1120-9_3.
   Google Scholar
• Gökalp, E., U. Şener, and P. E. Eren. 2017. “Development of an Assessment Model for Industry 4.0: Industry 4.0-MM.” Communications in Computer and Information Science 770:128–142. https://doi.org/10.1007/978-3-319-67383-7_10.
   Google Scholar
• Hapuwatte, B., K. D. Seevers, F. Badurdeen, and I. S. Jawahir. 2016. “Total Life Cycle Sustainability Analysis of Additively Manufactured Products.” Procedia CIRP 48 (January): 376–381. https://doi.org/10.1016/j.procir.2016.03.016.
   Google Scholar
• Hizam-Hanafiah, M., M. Soomro, and N. L. Abdullah. 2020. “Industry 4.0 Readiness Models: A Systematic Literature Review of Model Dimensions.” Information 11 (7): 364. https://doi.org/10.3390/info11070364.
   Web of Science ®Google Scholar
• I4.0: Building the Digital Enterprise. 2022, April, 36.
   Google Scholar
• I4.0: Readiness-Check. 2022. April 4, 2022. https://www.industrie40-readiness.de/?lang=en.
   Google Scholar
• Jiang, J. 2020. “A Novel Fabrication Strategy for Additive Manufacturing Processes.” Journal of Cleaner Production 272 (November): 122916. https://doi.org/10.1016/j.jclepro.2020.122916.
   Google Scholar
• Jiang, J., X. Xu, and J. Stringer. 2018. “Support Structures for Additive Manufacturing: A Review.” Journal of Manufacturing and Materials Processing 2 (4): 64. https://doi.org/10.3390/jmmp2040064.
   Google Scholar
• Jiang, J., and M. Yongsheng. 2020. “Path Planning Strategies to Optimize Accuracy, Quality, Build Time and Material Use in Additive Manufacturing: A Review.” Micromachines 11 (7): 633. https://doi.org/10.3390/mi11070633.
   PubMed Web of Science ®Google Scholar
• Kawalkar, R., H. K. Dubey, and S. P. Lokhande. 2022. “A Review for Advancements in Standardization for Additive Manufacturing.” Materials Today: Proceedings 50 (January): 1983–1990. https://doi.org/10.1016/j.matpr.2021.09.333.
   Google Scholar
• Khajavi, S. H., J. Partanen, and J. Holmström. 2014a. “Additive Manufacturing in the Spare Parts Supply Chain.” Computers in Industry 65 (1): 50–63. https://doi.org/10.1016/j.compind.2013.07.008.
   Web of Science ®Google Scholar
• Khajavi, S. H., J. Partanen, and J. Holmström. 2014b. “Additive Manufacturing in the Spare Parts Supply Chain.” Computers in Industry 65 (1): 50–63. https://doi.org/10.1016/j.compind.2013.07.008.
   Web of Science ®Google Scholar
• Khorram Niaki, M., and F. Nonino. 2017. “Additive Manufacturing Management: A Review and Future Research Agenda.” International Journal of Production Research 55 (5): 1419–1439. https://doi.org/10.1080/00207543.2016.1229064.
   Web of Science ®Google Scholar
• Klahn, C., F. Fontana, B. Leutenecker-Twelsiek, and M. Meboldt. 2020. “Mapping Value Clusters of Additive Manufacturing on Design Strategies to Support Part Identification and Selection.” Rapid Prototyping Journal 26 (10): 1797–1807. https://doi.org/10.1108/RPJ-10-2019-0272.
   Web of Science ®Google Scholar
• Knofius, N., M. C. van der Heijden, and W. H. M. Zijm. 2019a. “Moving to Additive Manufacturing for Spare Parts Supply.” Computers in Industry 113 (December): 103134. https://doi.org/10.1016/j.compind.2019.103134.
   Google Scholar
• Knofius, N., M. C. van der Heijden, and W. H. M. Zijm. 2019b. “Moving to Additive Manufacturing for Spare Parts Supply.” Computers in Industry 113 (December): 103134. https://doi.org/10.1016/j.compind.2019.103134.
   Google Scholar
• Kumar, N. V., S. Karadgi, and B. B. Kotturshettar. 2020. “Review of Research Issues and Challenges of Maturity Models Concerning Industry 4.0.” IOP Conference Series: Materials Science & Engineering 872 (1): 012006. https://doi.org/10.1088/1757-899X/872/1/012006.
   Google Scholar
• Laverne, F., R. Marquardt, F. Segonds, I. Koutiri, and N. Perry. 2019. “Improving Resources Consumption of Additive Manufacturing Use During Early Design Stages: A Case Study.” International Journal of Sustainable Engineering 12 (6): 365–375. https://doi.org/10.1080/19397038.2019.1620897.
   Google Scholar
• Leal, R., F. M. Barreiros, L. Alves, F. Romeiro, J. C. Vasco, M. Santos, and C. Marto. 2017. “Additive Manufacturing Tooling for the Automotive Industry.” The International Journal of Advanced Manufacturing Technology 92 (5): 1671–1676. https://doi.org/10.1007/s00170-017-0239-8.
   Web of Science ®Google Scholar
• Leyh, C., T. Schäffer, K. Bley, and S. Forstenhäusler. 2016. “SIMMI 4.0 – a Maturity Model for Classifying the Enterprise-Wide IT and Software Landscape Focusing on Industry 4.0.” 1297–1302. https://doi.org/10.15439/2016F478.
   Google Scholar
• McDonough, J. R. 2020. “A Perspective on the Current and Future Roles of Additive Manufacturing in Process Engineering, with an Emphasis on Heat Transfer.” Thermal Science and Engineering Progress 19 (October): 100594. https://doi.org/10.1016/j.tsep.2020.100594.
   Google Scholar
• Mittal, S., M. A. Khan, D. Romero, and T. Wuest. 2018. “A Critical Review of Smart Manufacturing & Industry 4.0 Maturity Models: Implications for Small and Medium-Sized Enterprises (SMEs).” Journal of Manufacturing Systems Elsevier B.V. https://doi.org/10.1016/j.jmsy.2018.10.005.
   Web of Science ®Google Scholar
• Neely, E. 2016. “The Risks of Revolution: Ethical Dilemmas in 3D Printing from a US Perspective.” Science and Engineering Ethics 22 (5): 1285–1297. https://doi.org/10.1007/s11948-015-9707-4.
   PubMed Web of Science ®Google Scholar
• Patalas-Maliszewska, J., and M. Topczak. 2021. “A New Management Approach Based on Additive Manufacturing Technologies and Industry 4.0 Requirements.” Advances in Production Engineering & Management 16 (1): 125–135. https://doi.org/10.14743/apem2021.1.389.
   Web of Science ®Google Scholar
• Pekkola, S., P. Niemi, and J. Ukko. 2013. “Building Understanding of the Development of Performance Management for Collaborative Networks with a Knowledge Maturity Model.” International Journal of Networking and Virtual Organisations 12 (3): 179–200. https://doi.org/10.1504/IJNVO.2013.056991.
   Google Scholar
• Pereira, T., J. V. Kennedy, and J. Potgieter. 2019. “A Comparison of Traditional Manufacturing Vs Additive Manufacturing, the Best Method for the Job.” Procedia Manufacturing 30 (January): 11–18. https://doi.org/10.1016/j.promfg.2019.02.003.
   Google Scholar
• Pierin Ramos, L. F., E. D. F. Rocha Loures, and F. Deschamps. 2020. “An Analysis of Maturity Models and Current State Assessment of Organizations for Industry 4.0 Implementation.” Procedia Manufacturing 51 (January): 1098–1105. https://doi.org/10.1016/j.promfg.2020.10.154.
   Google Scholar
• Pour, M. A., and S. Zanoni. 2017. “Impact of Merging Components by Additive Manufacturing in Spare Parts Management.” Procedia Manufacturing 11 (January): 610–618. https://doi.org/10.1016/j.promfg.2017.07.155.
   Google Scholar
• PricewaterhouseCoopers. 2022. “How Business Leaders Can Raise Their Digital IQ.” PwC. April 6, 2022. https://www.pwc.com/us/en/tech-effect/cloud/digital-iq.html.
   Google Scholar
• Rafael, L. D., G. Epelde Jaione, L. Cristina, and S. Lasa Ibon. 2020. “An Industry 4.0 Maturity Model for Machine Tool Companies.” Technological Forecasting and Social Change 159 (October): 120203. https://doi.org/10.1016/j.techfore.2020.120203.
   Google Scholar
• Rajaguru, K., T. Karthikeyan, and V. Vijayan. 2020. “Additive Manufacturing – State of Art.” Materials Today: Proceedings 21 (January): 628–633. https://doi.org/10.1016/j.matpr.2019.06.728.
   Google Scholar
• Rejeski, D., F. Zhao, and Y. Huang. 2018. “Research Needs and Recommendations on Environmental Implications of Additive Manufacturing.” In Additive Manufacturing. Elsevier B.V. https://doi.org/10.1016/j.addma.2017.10.019.
   Google Scholar
• Ruckstuhl, K., C. Camoes Rabello R, and S. Davenport. 2020. “Design and Responsible Research Innovation in the Additive Manufacturing Industry.” Design Studies 71: 100966. https://doi.org/10.1016/j.destud.2020.100966.
   Web of Science ®Google Scholar
• Santos, R., and J. Martinho. 2019. “An Industry 4.0 Maturity Model Proposal.” Journal of Manufacturing Technology Management 31 (5): 1023–1043. https://doi.org/10.1108/JMTM-09-2018-0284.
   Web of Science ®Google Scholar
• Savolainen, J., and M. Collan. 2020a. “Additive Manufacturing Technology and Business Model Change – a Review of Literature.” Additive Manufacturing 32 (March): 101070. https://doi.org/10.1016/j.addma.2020.101070.
   Google Scholar
• Savolainen, J., and M. Collan. 2020b. “How Additive Manufacturing Technology Changes Business Models? – Review of Literature.” Additive Manufacturing 32 (August 2019): 101070. https://doi.org/10.1016/j.addma.2020.101070.
   Google Scholar
• Schumacher, A., S. Erol, and W. Sihn. 2016. “A Maturity Model for Assessing Industry 4.0 Readiness and Maturity of Manufacturing Enterprises.” 52:161–166. https://doi.org/10.1016/j.procir.2016.07.040.
   Google Scholar
• Schumacher, A., T. Nemeth, and W. Sihn. 2019. “Roadmapping Towards Industrial Digitalization Based on an Industry 4.0 Maturity Model for Manufacturing Enterprises.” In Procedia CIRP, 79:409–414. Elsevier B.V. https://doi.org/10.1016/j.procir.2019.02.110.
   Google Scholar
• Seepersad, C. 2014. “Challenges and Opportunities in Design for Additive Manufacturing.” 3D Printing and Additive Manufacturing 1 (1): 10–13. https://doi.org/10.1089/3dp.2013.0006.
   Google Scholar
• Smith, M., and P. Carayon. 2007. “New Technology, Automation, and Work Organization: Stress Problems and Improved Technology Implementation Strategies.” The International Journal of Human Factors in Manufacturing 5 (1): 99–116. https://doi.org/10.1002/hfm.4530050107.
   Google Scholar
• Turkcan, H., S. Z. Imamoglu, and H. Ince. 2022. “To Be More Innovative and More Competitive in Dynamic Environments: The Role of Additive Manufacturing.” International Journal of Production Economics 246 (April): 108418. https://doi.org/10.1016/j.ijpe.2022.108418.
   Google Scholar
• Zapata, M. L., L. Berrah, and L. Tabourot. 2020. “Is a Digital Transformation Framework Enough for Manufacturing Smart Products? The Case of Small and Medium Enterprises.” Procedia Manufacturing 42 (January): 70–75. https://doi.org/10.1016/j.promfg.2020.02.024.
   Google Scholar
• Zhang, Y., S. Yang, and Y. Fiona Zhao. 2020. “Manufacturability Analysis of Metal Laser-Based Powder Bed Fusion Additive Manufacturing—A Survey.” The International Journal of Advanced Manufacturing Technology 110 (1–2): 57–78. https://doi.org/10.1007/s00170-020-05825-6.
   Web of Science ®Google Scholar
• Zimmermann, N., J. Lentes, and A. Werner. 2019. “Analysis of Requirements, Potentials and Risks Caused by Using Additive Manufacturing.” Procedia Manufacturing, 25th International Conference on Production Research Manufacturing Innovation: Cyber Physical Manufacturing August 9-14, 2019 Chicago, Illinois (USA), 39: 474–483. https://doi.org/10.1016/j.promfg.2020.01.404.
   Google Scholar