As-cast structures and mechanical properties of impeller-mixed, chill-cast, leaded aluminium—silicon alloys

References

• P. I. Nielsen, H. H. Nuernberger and C. G. Shiring, Aluminium: Design and Application (A.S.M., Metals Park, Ohio, 1967), vol. 2, pp. 485–491.
   Google Scholar
• S. N. Tiwari, J. P. Pathak and S. L. Malhotra, “Aluminium alloys as plain bearing materials—an overview”, International Symposium on Light Metals Science and Technology (Trans Tech Publications, Switzerland, 1985), pp 139–157.
   Google Scholar
• W. S. Owen, “Can a simple heat treatment help to save detroit?”, Metals Technology, 1980, 7, 1–13.
   Google Scholar
• H. Y. Hunsicker, Sleeve Bearing Materials: Aluminium Alloy Bearings—Metallurgy, Design and Service Characteristics, ed. by R. W. Dayton (A.S.M., Cleveland, 1949), pp. 82–118.
   Google Scholar
• J. F. Archard, “Contact and rubbing of flat surfaces”, J. Appl. Phys., 1953, 24, 981–983.
   Web of Science ®Google Scholar
• J. Clarke and A. D. Sarker, “Wear characteristics of as-cast binary aluminium—silicon alloys, Wear, 1979, 54, 7–16.
   Web of Science ®Google Scholar
• K. Moh, Jasim and E. S. Dwarkadase, “Wear in Al—Si alloys under dry sliding conditions”, Wear, 1987, 119, 119–130.
   Google Scholar
• J. S. Sheasby, A. Cohen, C. D. Jia, H. Sang, and D. Kenny, “Wear of aluminium and Al—Si alloys in single-PAS sliding against glass”, Wear, 1989, 133, 343–354.
   Google Scholar
• A. D. Sarkar and J. Clarke, “Wear characteristics, friction and surface topography observed in the dry sliding of as-cast and age-hardening Al—Si alloys.” Wear, 1982, 75, 71–85.
   Web of Science ®Google Scholar
• C. S. S. Krishnan, R. K. Mohanti and R. Kumar, “The dispersion of lead and graphite in aluminium alloys for bearing applications”, Wear, 1984, 96, 121–134.
   Google Scholar
• D. Tabor, “The friction properties of some white metal bearing alloys: The role of the matrix and the hard particles”, J. Appl. Phys., 1945, 16, 325–337.
   Web of Science ®Google Scholar
• S. N. Tiwari, J. P. Pathak and S. L. Malhotra. “Lead—a potential soft-phase alloying addition to aluminium bearing alloys”, Aluminium, 1987, 64, 411–415.
   Google Scholar
• J. P. Pathak, S. N. Tiwari and S. L. Malhotra, “Production of high leaded aluminium by impeller mixing”, Metals Technology, 1979, 6, 442–445.
   Web of Science ®Google Scholar
• V. G. Gorbunov, V. D. Parshin and V. V. Panin, “Production problems and properties of lead bearing aluminium alloy castings”, Russian Casting Production, 1973, 9, 353–354.
   Google Scholar
• R. E. Eppich, F. J. Webbere and R. N. Dawson, “A new bearing material cast from immiscible metals”, Metals Engineering Quarterly, 1971, 11, 33–39.
   Web of Science ®Google Scholar
• S. Mohan, V. Agarwala and R. Ray, “Liquid—liquid dispersion for fabrication of Al—Pb metal—metal composites”, Mater. Sci. Eng., 1991, 144, 215–219.
   Google Scholar
• G. G. Brown, Unit Operations (John Willey and Sons, New York, 1959), pp. 177–179.
   Google Scholar
• Z. Sterbecek and P. Tausk, Mixing in the Chemical Industry (Pergamon Press, New York, 1965), pp. 221–224.
   Google Scholar
• W. L. McCabe and J. C. Smith, Unit Operations of Chemical Engineering (McGraw-Hill, New York, 1976).
   Google Scholar
• R. L. Bates, P. L. Fondy and J. G. Fenil, Mixing Theory and Practice (Adacemic Press, London, 1967), pp. 112–115.
   Google Scholar
• S. Nagata, Mixing Principles and Applications (Halsted Press, Tokyo, 1975), pp. 298–333.
   Google Scholar
• S. N. Tiwari and J. P. Pathak, Proceedings of the Conference on Advances in Mechanical Engineering (Tata McGraw-Hill, New Delhi, 1990), pp. 487–494.
   Google Scholar
• N. Fat-Halla, S. Pascal and S. Michel, “Microstructures and mechanical properties of modified and non-modified stir-cast Al—Si hypoeutectic alloys”, J. Mater. Sci., 1988, 23, 2419–2423.
   Web of Science ®Google Scholar
• B. Apaydin, “Effect of stirring on the bulk solidification of hypoeutectic and butectic Al—Si alloys”, J. Mater. Sci. Lett., 1982, 1, 39–43.
   Google Scholar
• N. Fat-Halla, “Structural modification of Al-Si eutectic alloy by Sr and its effect on tensile and fracture characteristics”, J. Mater. Sci., 1989, 24, 2488–2492.
   Web of Science ®Google Scholar
• M. M. Haque and V. Kondic, “Influence of Strontium on Solidification of Aluminium-Silicon Alloys”, International Symposium on Light Metals Science and Technology, (Trans Tech Publications, Switzerland, 1985), pp. 159–170.
   Google Scholar
• G. A. Chadwick, Progress in Materials Science, ed. by B. Chalmers (Pergamon Press, London, 1965), vol. 12, pp. 99–101.
   Google Scholar
• I. Kanani and G. R. Abbaschian, “Modification of aluminium—silicon alloys”, Aluminium, 1984, 60, E505–E509.
   Google Scholar
• L. F. Mondolfo, Aluminium Alloys: Structure and Properties (Butterworths, London, 1976), pp. 352–353.
   Google Scholar
• N. R. Pillai, “Role of Minor Additions on the Micro- structures and Properties of Binary Eutectic Alloys”, Ph. D. Thesis (Banaras Hindu University, Varanasi, India, 1970).
   Google Scholar
• N. R. Pillai, “Modification of aluminium—silicon alloys”, J. Sci. Ind. Res., 1967, 26, 466–474.
   Google Scholar
• R. T. Southin, “The Influence of Low-Frequency Vibration on the Nucleation of Solidifying Metals”, J. Inst. Metals, 1966, 94, 401–407.
   Google Scholar
• T. P. Fisher, “Effect of vibrational energy on the solidification of aluminium alloys”, The British Foundryman, 1973, 66, 71–84.
   Google Scholar
• Y. Komiyama, “Development of an Aluminium Alloy of the LM 26 type”, Monograph and Report Series (The Institute of Metals, London, 1972), vol. 35, pp. 25–33.
   Google Scholar
• S. N. Tiwari, J. P. Pathak and S. L. Malhotra, “Microstructures and mechanical properties of leaded aluminium alloys,” Metals Technology, 1983, 10, 413–423.
   Web of Science ®Google Scholar
• K. Ichikawa and S. Ishizuka, “Production of Al—Pb alloys by rheocasting”, Trans. Japan Inst. Metals, 1987, 28, 145–153.
   Google Scholar
• J. P. Pathak, V. Singh and S. N. Tiwari, “On the fracture characteristics of leaded aluminium alloys”, J. Mater. Sci. Lett., 1992, 11, 639–641.
   Google Scholar
• J. P. Pathak, V. Singh and S. N. Tiwari, “Effect of lead content on tensile fracture of Al—4.5 Cu—Pb bearing alloy”, J. Mater. Sci. Lett., 1993, 12, 1450–1452.
   Google Scholar