Application of value stream mapping (VSM) for lean and cycle time reduction in complex production environments: a case study

References

• Agyapong-Kodua, K. 2009. “Multi-product Cost and Value Stream Modelling in Support of Business Process Analysis.” Doctoral diss., Kwabena Agyapong-Kodua.
   Google Scholar
• Agyapong-Kodua, K., J. O. Ajaefobi, R. H. Weston, and S. Ratchev. 2012. “Development of a Multi-product Cost and Value Stream Modelling Methodology.” International Journal of Production Research 50 (22): 6431–6456.10.1080/00207543.2011.648777
   Web of Science ®Google Scholar
• Al-Sudairi, A. A. 2007. “Evaluating the Effect of Construction Process Characteristics to the Applicability of Lean Principles.” Construction 7 (1): 99–121.
   Google Scholar
• Alvandi, S., W. Li, M. Schönemann, S. Kara, and C. Herrmann. 2016. “Economic and Environmental Value Stream Map (E2VSM) Simulation for Multi-product Manufacturing Systems.” International Journal of Sustainable Engineering 9 (6): 354–362.
   Web of Science ®Google Scholar
• Araya, J. M. 2012. Value Stream Mapping Adapted to High-Mix, Low-volume Manufacturing Environments. http://www.diva-portal.org/smash/get/diva2:557027/FULLTEXT01.pdf.
   Google Scholar
• Arbulu, R., I. Tommelein, K. Walsh, and J. Hershauer. 2003. “Value Stream Analysis of a Re-engineered Construction Supply Chain.” Building Research & Information 31 (2): 161–171.10.1080/09613210301993
   Web of Science ®Google Scholar
• Bertolini, M., M. Braglia, G. Romagnoli, and F. Zammori. 2013. “Extending Value Stream Mapping: The Synchro-MRP Case.” International Journal of Production Research 51 (18): 5499–5519.10.1080/00207543.2013.784415
   Web of Science ®Google Scholar
• Bhasin, S. 2015. Lean Management Beyond Manufacturing. New York: Springer International Publishing.
   Google Scholar
• Bicheno, J. 2004. The New Lean Toolbox. Buckingham: Picsie Books.
   Google Scholar
• Birkie, S. E., and P. Trucco. 2016. “Understanding Dynamism and Complexity Factors in Engineer-to-order and Their Influence on Lean Implementation Strategy.” Production Planning & Control 27 (5): 345–359.10.1080/09537287.2015.1127446
   Web of Science ®Google Scholar
• Braglia, M., G. Carmignani, and F. Zammori. 2006. “A New Value Stream Mapping Approach for Complex Production Systems.” International Journal of Production Research 44 (18–19): 3929–3952.10.1080/00207540600690545
   Web of Science ®Google Scholar
• Braglia, M., M. Frosolini, and F. Zammori. 2009. “Uncertainty in Value Stream Mapping Analysis.” International Journal of Logistics: Research and Applications 12 (6): 435–453.10.1080/13675560802601559
   Web of Science ®Google Scholar
• Chitturi, R. M., D. J. Glew, and A. Paulls. 2007. “Value Stream Mapping in a Jobshop.” International Conference on Agile Manufacturing, ICAM 2007, July 9–11, 142–147. Durham: Durham University.
   Google Scholar
• da CL Alves, T., I. D. Tommelein, and G. Ballard. 2005. “Value Stream Mapping for Make-to-order Products in a Job Shop Environment.” Construction Research Congress, April 5–7, 1–10. San Diego, CA.
   Google Scholar
• Daaboul, J., P. Castagna, C. Da Cunha, and A. Bernard. 2014. “Value Network Modelling and Simulation for Strategic Analysis: A Discrete Event Simulation Approach.” International Journal of Production Research 52 (17): 5002–5020.10.1080/00207543.2014.886787
   Web of Science ®Google Scholar
• Dal Forno, A. J., F. A. Pereira, F. A. Forcellini, and L. M. Kipper. 2014. “Value Stream Mapping: A Study about the Problems and Challenges Found in the Literature from the past 15 Years about Application of Lean Tools.” The International Journal of Advanced Manufacturing Technology 72 (5–8): 779–790.10.1007/s00170-014-5712-z
   Web of Science ®Google Scholar
• Deif, A. 2012. “Assessing Lean Systems Using Variability Mapping.” Procedia CIRP 3: 2–7.10.1016/j.procir.2012.07.002
   Google Scholar
• Dessens, L. F. R., and Z. I. C. López. 2012. “Use of Value Mapping Tools for Manufacturing Systems Redesign.” In Industrial Engineering: Innovative Networks, edited by Suresh P. Sethi, Marija Bogataj, and Lorenzo Ros-McDonnell, 237–245. London: Springer.
   Google Scholar
• Dinis-Carvalho, J., F. Moreira, S. Bragança, E. Costa, A. Alves, and R. Sousa. 2015. “Waste Identification Diagrams.” Production Planning and Control 26 (3): 235–247.
   Web of Science ®Google Scholar
• Duggan, K. J. 2012. Creating Mixed Model Value Streams: Practical Lean Techniques for Building to Demand. New York: CRC Press.
   Google Scholar
• Eisenhardt, K. M. 1989. “Building Theory from the Case Study Research.” Academy of Management Review 14 (4): 532–550.
   Web of Science ®Google Scholar
• Ellram, L. M. 1996. “The Use of the Case Study Method in Logistics Research.” Journal of Business Logistics 17 (2): 93–138.
   Google Scholar
• Faulkner, W., and F. Badurdeen. 2014. “Sustainable Value Stream Mapping(Sus-VSM): Methodology to Visualize and Assess Manufacturing Sustainability Performance.” Journal of Cleaner Production 85: 8–18.10.1016/j.jclepro.2014.05.042
   Web of Science ®Google Scholar
• Fontanini, P. S., and F. A. Picchi. 2004. “Value Stream Macro Mapping –A Case Study of Aluminium Windows for Construction Supply Chain.” Proceedings of the 12th Annual Conference of the International Group for Lean Construction (IGLC-12), 576–587. www.iglc2004.dk/13729.
   Google Scholar
• Gosling, J., and M. M. Naim. 2009. “Engineer-to-order Supply Chain Management: A Literature Review and Research Agenda.” International Journal of Production Economics 122 (2): 741–754.
   Web of Science ®Google Scholar
• Groover, M. P. 2007. Work Systems and the Methods, Measurement, and Management of Work. Upper Saddle River, NJ: Pearson Prentice Hall.
   Google Scholar
• Henrique, D. B., A. F. Rentes, M. Godinho Filho, and K. F. Esposto. 2016. “A New Value Stream Mapping Approach for Healthcare Environments.” Production Planning & Control 27 (1): 24–48.10.1080/09537287.2015.1051159
   Web of Science ®Google Scholar
• Hines, P., M. Holweg, and N. Rich. 2004. “Learning to Evolve – A Review of Contemporary Lean Thinking.” International Journal of Operations & Production Management 24 (10): 994–1011.10.1108/01443570410558049
   Web of Science ®Google Scholar
• Hines, P., and N. Rich. 1997. “The Seven Value Stream Mapping Tools.” International Journal of Operations & Production Management 17 (1): 46–64.10.1108/01443579710157989
   Web of Science ®Google Scholar
• Jasti, N. V. K., and R. Kodali. 2015. “Lean Production: Literature Review and Trends.” International Journal of Production Research 53 (3): 867–885.10.1080/00207543.2014.937508
   Web of Science ®Google Scholar
• Jina, J., A. K. Bhattacharya, and A. D. Walton. 1997. “Applying Lean Principles for High Product Variety and Low Volumes: Some Issues and Propositions.” Logistics Information Management 10 (1): 5–13.10.1108/09576059710159655
   Google Scholar
• Khaswala, Z. N., and S. A. Irani. 2001. “Value Network Mapping (VNM): Visualization and Analysis of Multiple Flows in Value Stream Maps.” Proceedings of the Lean Management Solutions Conference, September 10–11. 47–63. St Louis, Missouri.
   Google Scholar
• Koskela, L. 1992. Application of the New Production Philosophy to Construction, No.72. Stanford, CA: Stanford University.
   Google Scholar
• Koskela, L. 2000. An Exploration towards a Production Theory and Its Application to Construction. Espoo: VTT Technical Research Centre of Finland.
   Google Scholar
• Lande, M., R. L. Shrivastava, and D. Seth. 2016. “Critical Success Factors for Lean Six Sigma in SMEs (Small and Medium Enterprises).” The TQM Journal 28 (4): 613–635.10.1108/TQM-12-2014-0107
   Google Scholar
• Matt, D. T. 2014. “Adaptation of the Value Stream Mapping Approach to the Design of Lean Engineer-to-order Production Systems: A Case Study.” Journal of Manufacturing Technology Management 25 (3): 334–350.10.1108/JMTM-05-2012-0054
   Google Scholar
• McDonald, T., E. M. Van Aken, and A. F. Rentes. 2002. “Utilising Simulation to Enhance Value Stream Mapping: A Manufacturing Case Application.” International Journal of Logistics Research and Applications 5 (2): 213–232.10.1080/13675560210148696
   Google Scholar
• McManus, H. L. 2005. Product Development Value Stream Mapping (PDVSM) Manual. Cambridge, MA: The Lean Aerospace Initiative.
   Google Scholar
• Mohanty, R. P., D. Seth, and S. Mukadam. 2007. “Quality Dimensions of e-Commerce and Their Implications.” Total Quality Management & Business Excellence 18 (3): 219–247.10.1080/14783360601149992
   Web of Science ®Google Scholar
• Olhager, J. 2003. “Strategic Positioning of the Order Penetration point.” International Journal of Production Economics 85 (3): 319–329.
   Web of Science ®Google Scholar
• Parthanadee, P., and J. Buddhakulsomsiri. 2014. “Production Efficiency Improvement in Batch Production System Using Value Stream Mapping and Simulation: A Case Study of the Roasted and Ground Coffee Industry.” Production Planning and Control 25 (5): 425–446.10.1080/09537287.2012.702866
   Web of Science ®Google Scholar
• Pavnaskar, S. J., and J. K. Gershenson. 2004. “The Application of Value Stream Mapping to Lean Engineering.” ASME conference 2004, September 28–October 2, 833–842. Salt Lake City, UT.
   Google Scholar
• Pavnaskar, S. J., J. K. Gershenson, and A. B. Jambekar. 2003. “Classification Scheme for Lean Manufacturing Tools.” International Journal of Production Research 41 (13): 3075–3090.10.1080/0020754021000049817
   Web of Science ®Google Scholar
• Phadke, M. S. 1995. Quality Engineering Using Robust Design. Upper Saddle River, NJ: Prentice Hall PTR.
   Google Scholar
• Prakash, J., and J. F. Chin. 2014. “Comparison between Production Controls in Multi-stage Multi-product Manufacturing Environments: Two Case Studies.” Production & Manufacturing Research 2 (1): 477–500.
   Google Scholar
• Rehman, M. A., D. Seth, and R. L. Shrivastava. 2016. “Impact of Green Manufacturing Practices on Organisational Performance in Indian Context: An Empirical Study.” Journal of Cleaner Production 137: 427–448.10.1016/j.jclepro.2016.07.106
   Web of Science ®Google Scholar
• Rother, M., and J. Shook. 1999. Learning to See. Brookline, MA: Lean Enterprise Institute.
   Google Scholar
• Rother, M., and J. Shook. 2003. Learning to See: Value Stream Mapping to Add Value and Eliminate Muda. Cambridge, NY: Lean Enterprise Institute.
   Google Scholar
• Roy, R. K. 2001. Design of Experiments Using the Taguchi Approach: 16 Steps to Product and Process Improvement. New York: Wiley.
   Google Scholar
• Schmidtke, D., U. Heiser, and O. Hinrichsen. 2014. “A Simulation-enhanced Value Stream Mapping Approach for Optimisation of Complex Production Environments.” International Journal of Production Research 52 (20): 6146–6160.10.1080/00207543.2014.917770
   Web of Science ®Google Scholar
• Schonberger, R. J. 2008. World Class Manufacturing. New York: Simon and Schuster.
   Google Scholar
• Serrano, I., C. Ochoa, and R. D. Castro. 2008. “Evaluation of Value Stream Mapping in Manufacturing System Redesign.” International Journal of Production Research 46 (16): 4409–4430.10.1080/00207540601182302
   Web of Science ®Google Scholar
• Seth, D., and V. Gupta. 2005. “Application of Value Stream Mapping for Lean Operations and Cycle Time Reduction: An Indian Case Study.” Production Planning and Control 16 (1): 44–59.10.1080/09537280512331325281
   Web of Science ®Google Scholar
• Seth, D., and M. K. Pandey. 2009. “A Multiple Item Inventory Model for a Non-stationary Demand.” Production Planning and Control 20 (3): 242–253.10.1080/09537280902843607
   Web of Science ®Google Scholar
• Seth, D., and A. Panigrahi. 2015. “Application and Evaluation of Packaging Postponement Strategy to Boost Supply Chain Responsiveness: A Case Study.” Production Planning and Control 26 (13): 1069–1089.10.1080/09537287.2015.1010626
   Web of Science ®Google Scholar
• Seth, D., and S. C. Rastogi. 2009. Global Management Solutions: Demystified. 2nd ed. Singapore: Cengage Learning Asia.
   Google Scholar
• Seth, D., N. Seth, and D. Goel. 2008. “Application of Value Stream Mapping (VSM) for Minimization of Wastes in the Processing Side of Supply Chain of Cottonseed Oil Industry in Indian Context.” Journal of Manufacturing Technology Management 19 (4): 529–550.10.1108/17410380810869950
   Google Scholar
• Seth, D., and D. Tripathi. 2006. “A Critical Study of TQM and TPM Approaches on Business Performance of Indian Manufacturing Industry.” Total Quality Management & Business Excellence 17 (7): 811–824.10.1080/14783360600595203
   Web of Science ®Google Scholar
• Shah, R., and P. T. Ward. 2007. “Defining and Developing Measures of Lean Production.” Journal of operations management 25 (4): 785–805.
   Web of Science ®Google Scholar
• Shingo, S. 1989. A Study of the Toyota Production System: From an Industrial Engineering Viewpoint. New York: Productivity Press.
   Google Scholar
• Singh, B., S. K. Garg, and S. K. Sharma. 2011. “Value Stream Mapping: Literature Review and Implications for Indian Industry.” The International Journal of Advanced Manufacturing Technology 53 (5–8): 799–809.10.1007/s00170-010-2860-7
   Web of Science ®Google Scholar
• Tapping, D., T. Luyster, and T. Shuker. 2002. Value Stream Management. New York: Productivity Press.
   Google Scholar
• Thomassen, M. K., E. Alfnes, and E. Gran. 2015. “A New Value Stream Mapping Approach for Engineer-to-order Production Systems.” IFIP International Conference on Advances in Production Management Systems, September 7–9, 207–214. Tokyo: Springer.
   Google Scholar
• Tyagi, S., A. Choudhary, X. Cai, and K. Yang. 2015. “Value Stream Mapping to Reduce the Lead-time of a Product Development Process.” International Journal of Production Economics 160: 202–212.10.1016/j.ijpe.2014.11.002
   Web of Science ®Google Scholar
• Vinodh, S., S. V. Kumar, and K. E. K. Vimal. 2014. “Implementing Lean Sigma in an Indian Rotary Switches Manufacturing Organisation.” Production Planning & Control 25 (4): 288–302.10.1080/09537287.2012.684726
   Web of Science ®Google Scholar
• Voss, C., N. Tsikriktsis, and M. Frohlich. 2002. “Case Research in Operations Management.” International Journal of Operations & Production Management 22 (2): 195–219.10.1108/01443570210414329
   Web of Science ®Google Scholar
• Womack, J., D. T. Jones, and D. Roos. 1990. The Machine That Changed the World. New York: Rawson Associates (Simon and Schuster).
   Google Scholar
• Yang, L. R. 2013. “Key Practices, Manufacturing Capability and Attainment of Manufacturing Goals: The Perspective of Project/Engineer-to-order Manufacturing.” International Journal of Project Management 31 (1): 109–125.10.1016/j.ijproman.2012.03.005
   Web of Science ®Google Scholar
• Yin, R. K. 2003. Case Study Research: Design and Methods. Thousand Oaks, CA: Sage.
   Google Scholar