Classification and review of FMS scheduling procedures

References

• ABDIN M. F. , 1986 , Solution of scheduling problems of job shop type FMS with alternative machine tools , Computers and Industrial Engineering , 11 , p. 241 – 245
   Google Scholar
• AFENTAKIS P. , 1986 , Maximum thrroughput in flexible manufacturing systems . Proceedings of the Second ORSA/TIMS Conference of Flexible Manfufacturing Systems : Operations Research Models and Applications , Elsevier , Amsterdam , 509 – 552
   Google Scholar
• AFENTAKIS P. , Operational control problems in flexible manufacturing systems . WP #85-012 , Department of Industrial Engineering and Operations Research, Syracuse Universtiy ( Syracuse , New York ).
   Google Scholar
• AGNETIS A. and ARBIBI C. and STECKE K. E. , 1990 , Optimal two-machine sheduling in fa flexible flow system . Proceeding of the Second international Conference on Computer Integrated Manufacturing , Rensselaer Polytechnic Institute , ( Troy , NY )
   Google Scholar
• AGNETIS A. and ARBIB C. and STECKE K. E. , 1991 , Pary type selection and batch sequaencing in a flexible flow system , Working paper #670 , ( University of Michigan , Ann Arbor ).
   Google Scholar
• AKELLA R. and CHOONG Y. and GERSHWIN S. B. , 1985, Real-time production sheduling of an automated cardline, Annals of Operations Research , 3, 403–425
   Google Scholar
• AKELLA R. and MAIMON O. and GERSHWIN S. B. , 1990 , Value function approximation via linear programming for flexible manufacturing system scheduling , International Journal of Porduction Research , 28 , 1459 – 1470
   Web of Science ®Google Scholar
• AMOAKO-GYAMPAH K. , 1994 , A comparative study of FMS tool allocation and part type selection approaches for a varying part type mix , International Journal of Flexible Manufacturing Systems , 6 , forthcoming .
   Google Scholar
• ANONYMOUS. , 1982 , Big systme at John Deere solves new product problems , FMS Magazine , 16 – 19
   Google Scholar
• ANONYMOUS. 1985 , IBM' Automated Factory - A Giant Step Forward , Modern Material Handling , 274 – 281
   Google Scholar
• BEN-ARICH D. , 1986 , Knowledge based control system for automated production and assembly , In A. Kusiak , ed., Modeling and Design of Flexible Manufacturing Systems , ( Elsevier , Amsterdam ). 347 – 365
   Google Scholar
• BERRADA M. and STECKE K. E. , 1986 , A branch and bound approach for machine load balancing in flexible manufacturing systems , Management Science , 32 , 1316 – 1335
   Web of Science ®Google Scholar
• BLAZEWICZ J. and EISELT H. A. and FINKE G. and LOPORTE G. , 1991 , Scheduling tasks and vehicles in a flexible manufacturing system , International Journal of Flexible Manufacturing Systems , 4 , p. 4 – 16
   Google Scholar
• BLAZEWICZ J. and DROR M. and PAWLAK G. and STECK K. E. , 1992 , Scheduling parts through a two-stage tandem flexible flow shop , Working paper No. 699 , ( University of Michigan , An Arbor ). 699
   Google Scholar
• BROWNE J. and DUBOIS D. and RATHMILL K. and SETHI S. p. and STECKE K. E. , 1984 , Classification of flexible manufacturing systems , FMS Magazine , 2 , p. 114 – 117
   Google Scholar
• BRUNO G. and ELIA A. and LAFACE p. , 1986 , A rule-based system to schedule production , Computer , 19 , p. 32 – 40
   Web of Science ®Google Scholar
• BUZACOTT J. A. and SHANTHIKUMAR J. G. , 1980 , Modles for understanding flexible manufacturing systems , AIIE Treansactions , 12 , p. 339 – 350
   Web of Science ®Google Scholar
• CARTER C.F.JR. , 1971 , Trends in machine tool develpment and application , Proceedings of the Second International Conference on Product Development and Manufacturing Technology , p. 125 – 141
   Google Scholar
• CHAN D. Y. and BEDWORTH D. D. , 1990 , Design of a scheduling system fof manufacturing cells , International Journal of Production Research , 28 , p. 2037 – 2050
   Web of Science ®Google Scholar
• CHANG Y. L. and MATSUO H. and SULLIVAN R. S. , 1989 , A bottleneck based beam search for job scheduling in a flexible manufacturing system , International Journal of Production Research , 27 , p. 1949 – 1962
   Web of Science ®Google Scholar
• CHANG Y. L. and SULLIVAN R. S. and BAGCHI U. and WILSON J. R. , 1985 , Experimental investigation of real-time scheduling in flexible manufacturing systems , Annals of Operatiosn Research , 3 , p. 355 – 378
   Google Scholar
• CHRYSSOLOURIS G. and DICKE K. and LEE M. , 1994 , An approach to real-time flecible scheduling , International Journal of Flexible Manfacturing Systems , Forthcoming , 6 3
   Google Scholar
• CONWAY R. W. and MAXWELL W. L. and MILLER L. W. , 1967 , Theory of scheduling ( Addision-Wesley , Reading,Massachusetts ).
   Google Scholar
• CRUZ J.B.JR. and SOERHEIM E. A. and MULLIGAN J.H.JR. , 1991 , An extension of the tardiness heuristic feedback algorithm for scheduling , Journal of Manufacturing Systems , 10 , p. 158 – 165
   Google Scholar
• DAR-EL E. M. and SARIN S. C. , 1984 , Scheduling parts in FMS to achieve maximum machine utilization , Proceedings of the First ORSA/TIMS Conference on Flexible Manfufacturing Stystems , University of Michigan ( Ann Arbor , Michigan ) , 300 – 306
   Google Scholar
• DAS S. D. and KHUMAWALA B. M. , 1991 , An efficient heuristic for scheduling batches of parts in a flecible flow system , International Journal of Flexible Manufacturing Systems , 3 , p. 121 – 148
   Google Scholar
• DEMPSTER M. A. H. and FISHER M. L. and JANSEN L. and LAGEWEG B. J. and LENSTRA J. K. and RINNOY KAN A. H. G. , 1981 , Analytic evaluation of hierarchical planning systems , Operations Reserach , 29 , p. 707 – 716
   Web of Science ®Google Scholar
• DUGGAN M. and BROWNE R. J. , 1991 , Production acitivity control : a practical approach to scheduling , International Journal of Flexible Manfufacturing Systems , 4 , p. 79 – 104
   Google Scholar
• DUTTA A. , 1990 , Reacting to scheduling exceptions in FMS envirionments , IIE Transactions , 22 , p. 300 – 314
   Web of Science ®Google Scholar
• EAVES B. C. and ROTHBLUM U. G. , 1988 , A discrete time average cost flexible manufacturing and operator scheduling model solved by deconvexification over time , Operations Research , 36 , 242 – 257
   Web of Science ®Google Scholar
• EMMONS H. , 1975 , One machine sequencing to minimize mean flow time with minimum number tardy , Navel Research Logisties Quartely , 22 , 585 – 592
   Google Scholar
• ERSCHLER J. and EVEQUE D. and ROUBELLAT F. , 1982 , Periodic loading of flexible manufacturing systems , Proceedings of the IFIP Congress, APMS , Bordeaux , France , 327 – 339
   Google Scholar
• ERSCHLER J. and ROUBELLAT F. and THURIOT C. , 1985 , Steady state shcheduling of a flexible manufacturing system with periodic releasing and flow time constrantints , Annals of Operations Research , 3 , p. 333 – 353
   Google Scholar
• Appendix E. , FMS/IMS State-of-the Art Review , 1983 , Manufacturing Technology for Advanced Machnining Systems , Ohio , AFWAL-TR , 83 – 4116
   Google Scholar
• FRENZEL B. and SCHMIDT G. , 1987 , IFPS: an approach to intelligent production scheduling and control of flexible manufacturing systems , Angewandte Informtik , 29 , p. 458 – 464
   Google Scholar
• GERSHWIN S. B. and MAIMON O. Z. , 1987 , Expert system facilitates scheduling of General Dynamics Fort Worth FMS, USA , American Machinist and Automated Manufacturing , p. 458 – 464
   Google Scholar
• GERSHWIN S. B. and MAIMON O. Z. , 1988 , Expert system facilitates scheduling of General Dynamics Fort Worth FMS , American Machinist and Automated Manufacturing , p. 132 – 25
   Google Scholar
• GHOSH S. and GAIMON C. , 1992 , Routing flexibility and production scheduling in a flexible manufacturing system , European Journal of Operational Research , 60 , p. 344 – 364
   Web of Science ®Google Scholar
• GRAY A. N. and SEIDMANN A. and STECKE K. E. , 1993 , A synthesis of decision models for tool management in automated manufacturing , Management Science , 39 , p. 549 – 567
   Web of Science ®Google Scholar
• GROOVER M. p. , 1980 , Automation, Production Systems and Computer-Aided Manufacturing ( Prentice-Hall Inc. Englewood Cliffs , New Jersey
   Google Scholar
• GUPTA Y. p. and EVANS G. W. and GUPTA M. C. , 1991 , A review of multi-criterion approaches to FMS scheduling problems , International Journal of Production Economics , 23 , p. 13 – 31
   Google Scholar
• HALL D. N. and STECKE K. E. , Design problems of flexible assembly systems, 1986, Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems: Operations Research Models and Applications , Elsevier , Amsterdam, p. 145–156
   Google Scholar
• HAX A. and MEAL H. , 1975 , Hierarchical integration of production planning and scheduling , TIMS Studies in Management Sciences , 1 , M. Giesler , ( North-Wolland/Elsevier , New York
   Google Scholar
• HlTOMl K. and YOSH1MURA M. and ONASHI K. , 1989 , Design and scheduling for flexible manufacturing cells with automatic setup equipment , International Journal of Production Research , 27 , p. 1137 – 1148
   Google Scholar
• HIT K. L. , Scheduling of flexible flowshops I , 1979 , Massachusetts Institute of Technology , Massachusetts , p. 879
   Google Scholar
• HITZ K. L. , Scheduling of flexible flowshops II , 1980 , Massachusetts Institute of Technology , Massachusetts , LIDS Report No. 1049 ,
   Google Scholar
• HOWE V. and KOVALEV M. M. , 1990 , On some problems in (he optimization of sequencing of the operative control of FMS (Flexible Manufacturing Systems) , Optimization: A Journal of Mathematical Programming and Operations Research , p. 109 – 121
   Google Scholar
• HUTCHISON J. and KHUMAWALA B. , 1990 , Scheduling random flexible manufacturing systems with dynamic environments , Journal of Operations Management , 9 , p. 335 – 351
   Google Scholar
• HUTCHISON J. and LEONG K. and SNYDER D. and WARD p. , 1991 , Scheduling approaches for random job shop flexible manufacturing systems , International Journal of Production Research , 29 , p. 1053 – 1068
   Web of Science ®Google Scholar
• ISHll N. and TALAVAGE J. J. , 1991 , A transient-based realtime scheduling algorithm in FMS , International Journal of Production Research , 29 , p. 2501 – 2520
   Google Scholar
• ISHll N. and TALAVACE J. J. , 1994 , A mixed dispatching rule approach in FMS scheduling , International Journal of Flexible Manufacturing Systems , 6
   Google Scholar
• IWATA K. and MUROTSU Y. and OBA F. , 1980 , Solution of large-scale scheduling problems for job shop type machining systems with alternative machining tools , Annals of the CIRP , 29 , p. 335 – 338
   Google Scholar
• JAIKUMAK R. , 1984 , Flexible manufacturing systems: a managerial perspective Harvard Business School ( Cambridge , Massachusetts ) , p. 784 – 078
   Google Scholar
• JAIKUMAR R. , 1986 , Postindustrial manufacturing , Harvard Business Review , 64 , p. 69 – 76
   Web of Science ®Google Scholar
• JONES C. H. , 1973 , An economic evaluation of job shop dispatching rules , Management Science , 20 , p. 293 – 307
   Web of Science ®Google Scholar
• KlNNUCAN p. , 1983 , Flexible systems invade the factory , High Technology , p. 33 – 42
   Google Scholar
• KOREN Y. , 1983 , Computer Control of Manufacturing Systems , ( McGraw-Hill , New York ).
   Google Scholar
• KUBIAK W. and SETHI S. p. , 1994 , Optimal just-in-time schedules for flexible transfer lines , International Journal of Flexible Manufacturing Systems , 6
   Google Scholar
• LEE H. F. and SRINIVASAN M. M. and YANO C. A. , 1991 , Design and scheduling of flexible assembly systems for large products: a simulation study , Journal of Manufacturing Systems , 10 , p. 54 – 66
   Google Scholar
• LlN L. S. and Lu C. Y. J. , 1984 , The scheduling problem in random flexible manufacturing systems , Proceedings of the First ORSA/TIMS Conference on Flexible Manufacturing Systems , University of Michigan , Ann Arbor , p. 278 – 283
   Google Scholar
• LlN Y. J. and SOLBERG J. J. , 1991 , Effectiveness of flexible routing control , International Journal of Flexible Manufacturing Systems , 3 , p. 189 – 212
   Google Scholar
• LUCERTINI M. and NlCOLO F. and ACNETIS A. , 1993 , Flow management in flexible manufacturing cells with pipeline operations , Management Science , 37 , p. 491 – 496
   Google Scholar
• MAIMON O. Z. and GERSHWIN S. B. , 1988 , Dynamic scheduling and routing for flexible manufacturing systems that have unreliable machines , Operations Research , 36 , 279 – 292
   Web of Science ®Google Scholar
• MATSUO H. and SUH C. J. and SULLIVAN R. S. , 1988 , A controlled search simulated annealing method for the general job shop scheduling problem , Graduate School of Business, The University of Texas at Austin , ( Austin , Texas , p. 3-4 – 88
   Google Scholar
• MAZZOLA J. B. and NEEBE A. W. and DUNN C. V. R. , 1988 , Production planning of a flexible manufacturing system in a materials requirement planning environment , International Journal of Flexible Manufacturing Systems , 1 ( 2 )
   Google Scholar
• MERCHANT M. E. , World trends in flexible manufacturing systems , The FMS Magazine , 1 , 4 – 5 .
   Google Scholar
• MESZAROS I. and SZELKE E. , 1990 , Knowledge-based adaptive control of FMS contributing to CIM , Computers in Industry , 14 , p. 89 – 98
   Google Scholar
• MILLER S. M. , 1985 , Industrial robotics and flexible manufacturing systems , The Management of Productivity and Technology in Manufacturing , Plenum Press , New York , p. 17 – 40
   Google Scholar
• MONTAZERI M. and VAN WASSENHOVE L. N. , 1990 , Analysis of scheduling rules for a flexible manufacturing system , International Journal of Production Research , 28 , p. 785 – 802
   Web of Science ®Google Scholar
• MORTON T. E. and RACHAMADUGU R. V. , 1982 , Myopic heuristics for the single machine weighted tardiness problem , Robotics Institute, Carnegie Mellon University ( Pittsburgh , Pennsylvania ) , Technical Report CMU-RI-TR-83-9 ,
   Google Scholar
• MORTON T. E. and LAWRENCE S. R. and RAJAGOPALAN S. and KEKRE S. , 1986 , MRPSTAR : PATRIARCH'S Planning Module . Graduate School of Industrial Administration, Carnegie Mellon University ( Pittsburgh , Pennsylvania ).
   Google Scholar
• MUKHOPADHYAY S. K. and MAITI B. and GARG S. , 1991 , Heuristic solution to the scheduling problems in flexible manufacturing systems , International Journal of Production Research , 29 , p. 2003 – 2024
   Web of Science ®Google Scholar
• NAKAMURA N. and SALVENDY G. , 1988 , An experimental study of human decision making in computer based scheduling of flexible manufacturing systems , International Journal of Production Research , 26 , p. 567 – 584
   Web of Science ®Google Scholar
• NEIMEIER H. A. , 1967 , An investigation of alternate routing in a job shop Masters Thesis, Cornell University , ( Ithaca , New York ).
   Google Scholar
• NOF S. Y. and BARASH M. M. and SOLBERG J. J. , 1979 , Operational control of item flow in versatile manufacturing systems , International Journal of Production Research , 17 , p. 479 – 489
   Web of Science ®Google Scholar
• OKEEFE R. M. and RAO R. , 1991 , Part input into a flexible flow system: an evaluation of look-ahead simulation and a fuzzy rule base , International Journal of Flexible Manufacturing Systems , 4 , p. 113 – 128
   Google Scholar
• OPITZ H. , 1971 , Planning manufacturing systems Manufacturing Seminar, University of Michigan , Ann Arbor , Michigan
   Google Scholar
• OW P. and SMITH S. F. , 1987, Two design principles for knowledge based systems, Decision Sciences , 18, p. 430–447
   Web of Science ®Google Scholar
• PANISHEV A. V. and VARAKIN A. S. , 1992 , Optimal sequencing of two-stage jobs in flexible manufacturing systems , Kibernetika i Sistemnyi Analiz , 2 , p. 85 – 93
   Google Scholar
• PASQUIER J. , 1984 , High-level simulation of flexible card assembly lines IBM Thomas J. Watson Research Center , Yorktown Heights , New York , Research Report RC-10881 ,
   Google Scholar
• PlNEDO M. L. and WOLF B. and MCCORMICK S. T. , Sequencing in a flexible assembly line with blocking to minimize cycle time , 1986 , Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems; Operations Research Models and Applications , Elsevier , Amsterdam , p. 499 – 508
   Google Scholar
• RACHAMADUGU R. and NANDKEOLYAR U. and SCHRIBER T. , 1993 , Scheduling with sequencing flexibility , Decision Sciences , 24 2 , p. 315 – 342
   Web of Science ®Google Scholar
• RAMADCE P. J. and CHASE C. , 1992 , On real-time scheduling policies for flexible manufacturing systems , IEEE Transactions on Automatic Control , 37 , p. 491 – 496
   Google Scholar
• RAMAN N. and RACHAMADUGU R. V. and TALBOT F. B. , 1989 , Real-time scheduling of an automated manufacturing centre , European Journal of Operational Research , 40 , p. 222 – 242
   Web of Science ®Google Scholar
• RAMAN N. and TALBOT F. G. and RACHAMADUGU R. V. , 1989 , Due date based scheduling in a general flexible manufacturing system , Journal of Operations Management , 8 , p. 115 – 132
   Google Scholar
• RANKY P. G. , 1983 , The Design and Operation of FMS?Flexible Manufacturing Systems Bedford IFS
   Google Scholar
• ROHAN T. R. , 1985 , Getting it together flexibly?assemblys role in the factory of the future , Industry Week , p. 39 – 49
   Google Scholar
• SABUNCUOGLU L. and HOMMERTZHEIM D. L. , 1922 , Experimental investigation of FMS machine and AGV scheduling rules against the mean flow time criterion , International Journal of Production Research , 30 , p. 1617 – 1636
   Google Scholar
• SABUNCUOGLU I. and HOMMERTZHEIM D. L. , 1992 , Dynamic dispatching algorithm for scheduling machines and automated guided vehicles in a flexible manufacturing system , International Journal of Production Research , 30 , p. 1059 – 1080
   Web of Science ®Google Scholar
• SABUNCUOGLU I. and HOMMERTZHEIM D. L. , 1993 , Experimental investigation of an FMS due-date scheduling problem: evaluation of machine and AGV scheduling rules , International Journal of Flexible Manufacturing Systems , 5
   Google Scholar
• SAWIK T. , 1990 , Modeling and scheduling of a flexible manufacturing system , European Journal of Operational Research , 45 , p. 177 – 190
   Web of Science ®Google Scholar
• SCHAFFER G. H. , 1981 , Implementing CIM , American Machinist Special Report , p. 736
   Google Scholar
• SCHRIBER T. J. and STECKE K. E. , Using mathematical programming and simulation to study FMS machine utilizations , 1987 , Proceedings of the 1987 Winter Simulation Conference , San Diego , California ,
   Google Scholar
• SCHRIBER T. J. and STECKE K. e. , 1988 , Machine utilization achieved using balanced FMS production ratios in a simulated setting , Annals of Operations Research , 15 , p. 229 – 267
   Google Scholar
• SHALEV-OREN S. and SEIDMANN A. and SCHWEIZER P. J. , 1985 , Analysis of flexible manufacturing systems with priority scheduling: PMVA , Annals of Operations Research , 3 , p. 115 – 139
   Google Scholar
• SHANKER K. and TZEN Y. J. , 1985 , A loading and dispatching problem in a random FMS , International Journal of Production Research , 23 , p. 579 – 595
   Web of Science ®Google Scholar
• SHAW M. J. , 1988 , A pattern-directed approach to FMS scheduling , Annals of Operations Research , 15 , p. 85 – 104
   Google Scholar
• SHAW M. J. , 1988 , Knowledge based scheduling in flexible manufacturing systems; an integration of pattern directed inference and heuristic search , International Journal of Production Research , 26 , p. 821 – 844
   Web of Science ®Google Scholar
• SHAW M. J. and WHINSTON A. B. , 1988 , A distributed knowledgebased approach to flexible automation: the contract net framework , International Journal of Flexible Manufacturing Systems , 1 , p. 85 – 104
   Google Scholar
• SHAW M. J. and WHINSTON A. B. , 1989 , An artificial intelligence aproach to the scheduling of flexible manufacturing systems , HE Transactions , 21 , p. 170 – 183
   Google Scholar
• SHEN S. and CHANG Y. L. , An AI approach to schedule generation in a flexible manufacturing system , 1986 , Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems; Operations Research Models and Applications , Amsterdam , K. E. Stecke and R. Suri, eds , p. 581 – 592
   Google Scholar
• SHEN S. and CHANG Y. L. , 1988 , Schedule generation in a flexible manufacturing system: a knowledge based approach , Decision Support Systems , 4 , p. 157 – 166
   Google Scholar
• SLOMP J. and GAALMAN G. J. C. and NAWIJN W. M. , 1988 , Quasi on-line scheduling procedures for flexible manufacturing systems , International Journal of Production Research , 26 , p. 585 – 598
   Web of Science ®Google Scholar
• SMITH M. L. and RAMESH R. and DUDEK R. A. and BLAIR E. L. , Characteristics of U.S. flexible manufacturing systems?a survey , 1986 , Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing Systems; Operations Research Models and Applications , Amsterdam , p. 477 – 486
   Google Scholar
• SMITH T. M. and STECKE K. E. , 1992 , On the robustness of using optima] part mix ratios to determine cyclic part input sequences into flexible flow systems Ann Arbor University of Michigan , p. 658
   Google Scholar
• SOLOT p. , 1990 , A concept for planning and scheduling in a flexible manufacturing system , European Journal of Operational Research , 45 , p. 85 – 95
   Google Scholar
• SRISKANDARAJAH C. and SETHI S. p. , 1989 , Scheduling algorithms for flexible flow shops: worst and average case performance , European Journal of Operational Research , 43 , p. 143 – 160
   Web of Science ®Google Scholar
• SRISKANDARAJAH C. and SETHI S. p. and LADET p. , 1989 , Scheduling methods for a class of flexible manufacturing systems , Annals of Operations Research , 17 , p. 139 – 161
   Google Scholar
• STECKE K. E. , 1977 , Experimental investigation of a computerized manufacturing system Lafayette Masters thesis, Purdue University
   Google Scholar
• STECKE K. E. , 1983 , Formulation and solution of nonlinear integer production planning problems for flexible manufacturing systems , Management Science , 29 , p. 273 – 287
   Web of Science ®Google Scholar
• STECKE K. E. , 1985 , Design, planning, scheduling, and control problems of flexible manufacturing systems , Annals of Operations Research , 3 , p. 3 – 12
   Google Scholar
• STECKE K. E. , Useful models to address FMS operating problems , 1985 , Proceedings of the Advances in Production Management Systems Conference , Hungary
   Google Scholar
• STECKE K. E. , 1986 , A hierarchical approach to solving machine grouping and loading problems of flexible manufacturing systems , European Journal of Operational Research , 24 , p. 396 – 378
   Google Scholar
• STECKE K. E. , 1989, Algorithms to efficiently plan and operate a particular FMS, International Journal of Flexible Manufacturing Systems , 1, p. 287–324
   Google Scholar
• STECKE K. E. , 1992 , Planning and scheduling approaches to operate a particular flexible manufacturing system , European Journal of Operational Research , 61 , p. 273 – 291
   Web of Science ®Google Scholar
• STECKE K. E. , 1992 , Procedures to determine part mix ratios for independent demands in flexible manufacturing systems , IEEE Transactions on Engineering Management , 39 , p. 359 – 369
   Web of Science ®Google Scholar
• STECKE K. E. and KlM I. , 1988 , A study of FMS part type selection approaches for short-term production planning , International Journal of Flexible Manufacturing Systems , 1 , p. 7 – 29
   Google Scholar
• STECKE K. E. and KlM I. , 1989 , Performance evaluation for systems of pooled machines of unequal sizes: unbalancing versus balancing , European Journal of Operational Research , 42 , p. 22 – 38
   Web of Science ®Google Scholar
• STECKE K. E. and KlM I. , 1991 , A flexible approach to part type selection using part mix ratios in flexible flow systems , International Journal of Production Research , 29 , p. 53 – 75
   Web of Science ®Google Scholar
• STECKE K. E. and SOLBERG J. J. , 1981 , Loading and control policies for a flexible manufacturing system , International Journal of Production Research , 19 , p. 481 – 490
   Web of Science ®Google Scholar
• STECKE K. E. and TOCZYLOWSKI E. , 1992 , Profit-based FMS dynamic part type selection over time for mid-term production planning , European Journal of Operational Research , 63 , p. 54 – 65
   Web of Science ®Google Scholar
• STOEVA S. p. , 1990 , A due date based dispatching rule for flexible manufacturing systems , International Journal of Production Research , 28 , p. 1991 – 2000
   Web of Science ®Google Scholar
• SURI R. , 1985 , An overview of evaluative models for flexible manufacturing systems , Annals of Operations Research , 3 , p. 13 – 22
   Google Scholar
• SURI R. and DlLUE J. W. , 1985 , A technique for on-line sensitivity analysis of flexible manufacturing systems , Annals of Operations Research , 3 , p. 381 – 382
   Google Scholar
• SURI R. and HlLDEBRANDT R. R. , 1984 , Modeling flexible manufacturing systems using mean value analysis , Journal of Manufacturing Systems , 3 , p. 61 – 69
   Web of Science ®Google Scholar
• TAHE T. and YAMAMURO S. and SALVENDY G. , An approach to knowledge elicitation in scheduling FMS: towards a hybrid intelligent system , 1989 , Ergonomics of Hybrid Automated Systems I , Amsterdam , p. 259 – 266
   Google Scholar
• TNHSEN A. and LEI L. , An expert system for scheduling robots in a flexible electroplating system with dynamically changing workloads , 1986 , Proceedings of the Second ORSA/TIMS Conference on Flexible Manufacturing, Systems: Operations Research Models and Applications , Amsterdam , p. 555 – 566
   Google Scholar
• TOCZYLOWSKI E. and HINDI K. S. , 1991 , Aggregate capacitated lot size scheduling for a class of flexible-machining and assembly systems , HE Transactions , 23 , p. 239 – 266
   Google Scholar
• TSUKIYAMA M. and MORI K. and FUKUDA T. , Dynamic scheduling with Petri-net modeling and constraint-based schedule editing for flexible manufacturing systems , 1991 , System Modelling and Optimization , Berlin , p. 913 – 922
   Google Scholar
• Tu Y. and SORGEN A. , 1991 , Real-time scheduling and control of transportation in flexible manufacturing cells , Computers in Industry , 16 , p. 315 – 320
   Google Scholar
• TZUBONE H. and ANZAI M. and SUGAWARA M. , 1991 , An interactive production planning and scheduling system for a low-type manufacturing process , International Journal of Production Economics , 22 , p. 43 – 51
   Google Scholar
• VAN WASSENHOVE L. N. and BAKER K. R. , 1982 , A bicriterion approach to time cost trade-offs in sequencing , European Journal of Operational Research , 11 , p. 48 – 54
   Web of Science ®Google Scholar
• VAN DYKE PARUNAK H. , 1991 , Characterizing the manufacturing scheduling problem , Journal of Manufacturing Systems , 10 , p. 241 – 259
   Web of Science ®Google Scholar
• WAYSON R. D. , 1965 , The effects of alternate machines on two priority dispatching disciplines in the general job shop Ithaca Master's Thesis, Cornell University, Department of Industrial Engineering and Operations Research
   Google Scholar
• WEBSTER W. B. , Production and order planning in the FMS environment , 1984 , Proceedings of the Fall Industrial Engineering Conference , Atlanta , Institute of Industrial Engineers; reprinted in Production Planning, Scheduling, and Inventory Control, Third Edition, eds. F. R. Jacobs and V. A. Mabert ,
   Google Scholar
• WIDMER M. , 1991 , Job shop scheduling with tooling constraints: a tabu search approach , Journal of the Operations Research Society , 42 , p. 75 – 82
   Web of Science ®Google Scholar
• WlLHELM W. E. and SHIN H. M. , 1985 , Effectiveness of alternate operations in a flexible manufacturing system , International Journal of Production Research , 23 , p. 65 – 79
   Google Scholar
• WINTER R. E. , 1986 , Computer-guided tools are catching on , Wall Street Journal , Feb p. 28
   Google Scholar
• WlTTROCK R. J. , 1985 , Scheduling algorithms for flexible flow lines , IBM Journal of Research and Development , 29 , p. 401 – 412
   Web of Science ®Google Scholar
• WlTTROCK R. J. , 1990 , Scheduling parallel machines with major and minor setup times , International Journal of Flexible Manufacturing Systems , 2 , p. 329 – 342
   Google Scholar
• WlTTROCK R. J. , 1992 , The Orchard scheduler for manufacturing systems , International Journal of Production Economics , 28 , p. 47 – 70
   Google Scholar
• Wu S. Y. and WYSK R. A. , 1989 , An application of discrete event simulation to on-line control and scheduling in flexible manufacturing , International Journal of Production Research , 27 , p. 1603 – 1624
   Web of Science ®Google Scholar
• XlE X. , 1989 , Real time scheduling and routing for flexible manufacturing systems with unreliable machines , RAIRO Recherche Operationnelle , 23 , p. 355 – 374
   Google Scholar
• YAMAGATA K. and TAMURA H. and HATONO I. , 1991 , Modeling and on line scheduling of flexible manufacturing systems using stochastic Petrinets , IEEE Transactions on Software Engineering , 17 , p. 126 – 132
   Web of Science ®Google Scholar
• YAO D. D. and BUZACOTT J. A. , 1985 , Modeling a class of statedependent routing in flexible manufacturing systems , Annals of Operations Research , 3 , p. 153 – 167
   Google Scholar
• YOUNG R. E. and ROSSI M. A. , 1988 , Toward knowledge based control of flexible manufacturing systems , III Transactions , 20 , p. 36 – 43
   Web of Science ®Google Scholar
•  Google Scholar