References
- Akdoğan, E., and M. A. Adli. 2011. “The Design and Control of a Therapeutic Exercise Robot for Lower Limb Rehabilitation: Physiotherabot.” Mechatronics 21: 509–522. doi: 10.1016/j.mechatronics.2011.01.005
- Allison, J., M. Kokkolaras, and P. Papalambros. 2005. “On the Impact of Coupling Strength on Complex System Optimization for Single-Level Formulations.” ASME 2005 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, Long Beach, CA, September. Paper number DETC2005-84790.
- Athan, T. 1994. “A Quasi-Monte Carlo Method for Multicriteria Optimization.” PhD thesis, University of Michigan, Ann Arbor, MI.
- Athan, T. W., and P. Y., Papalambros. 1996. “A Note on Weighted Criteria Methods for Compromise Solution in Multi-Objective Optimization.” Engineering Optimization 27: 155–176. doi: 10.1080/03052159608941404
- Balling, R. J., and J., Sobieszczanski-Sobieski. 1996. “Optimization of Coupled Systems: A Critical Overview of Approaches.” AIAA Journal 34: 6–17. doi: 10.2514/3.13015
- Chen, C., and C. Cheng. 2005. “Integrated Design for a Mechatronic Feed Drive System of Machine Tools.” IEEE/ASME International Conference on Advanced Intelligent Mechatronics, Monterey, CA.
- Das, I., and J. E. Dennis. 1997. “A Closer Look at Drawbacks of Minimizing Weighted Sums of Objectives for Pareto Set Generation in Multicriteria Optimization Problems.” Structural Optimization 14: 63–69. doi: 10.1007/BF01197559
- Fathy, H. 2003. “Combined Plant and Control Optimization: Theory, Strategies and Applications.” PhD thesis, University of Michigan, Ann Arbor, MI.
- Grigoriadis, K., and R. Skelton. 1998. “Integrated Structural and Control Design for Vector Second-Order Systems via LMIs.” Proceedings of the American Control Conference, Philadelphia, PA, June, 1625–1629.
- Haftka, R. 1990. “Integrated Structure/Control Optimization of Space Structures.” Proceedings of the AIAA Dynamics Specialists Conference, Long Beach, CA, April, 1–9.
- Hoffenson, S., A. Dagman, and R. Söderberg. 2014. “Tolerance Optimisation Considering Economic and Environmental Sustainability.” Journal of Engineering Design 25 (10–12): 367–390. doi: 10.1080/09544828.2014.994481
- Isermann, R. 1996. “On the Design and Control of Mechatronic Systems – A Survey.” IEEE Transactions on Industrial Electronics 43: 4–15. doi: 10.1109/41.481402
- Khorrami, F., and J. Rastegar. 1995. “Simultaneous Structure and Control Design for a Flexible Pointing System Actuated by Active Materials.” Proceedings of the 34th Conference on Decision & Control, New Orleans, LA.
- Kobayashi, M., S. Nishiwaki, K. Izui, and M. Yoshimura. 2009. “An Innovative Design Method for Compliant Mechanisms Combining Structural Optimisations and Designer Creativity.” Journal of Engineering Design 20 (2): 125–154. doi: 10.1080/09544820701565017
- Kosut, R., et al. 1990. “Simultaneous Control and Structure Design for Large Space Structures.” Proceedings of the American Control Conference, San Diego, CA, June, 860–865.
- Li, Y., P. Jiang, L. Gao, and X. Shao. 2013. “Sequential Optimisation and Reliability Assessment for Multidisciplinary Design Optimisation under Hybrid Uncertainty of Randomness and Fuzziness.” Journal of Engineering Design 24 (5): 363–382. doi: 10.1080/09544828.2012.753995
- Liu, S., and I. M. Boyle. 2009. “Engineering Design: Perspectives, Challenges, and Recent Advances.” Journal of Engineering Design 20 (1): 7–19. doi: 10.1080/09544820802670914
- Liu, X., and Z. Zhang. 2014. “A Hybrid Reliability Approach for Structure Optimisation based on Probability and Ellipsoidal Convex Models.” Journal of Engineering Design 25 (4–6): 238–258. doi: 10.1080/09544828.2014.961060
- Oldham, K., X. Huang, A. Chahwan, and R. Horowitz. 2005. “Design, Fabrication and Control of a High-Aspect Ratio Microactuator for Vibration Suppression in a Hard Disk Drive”. Proceedings of the IFAC World Congress, Prague.
- Ouyang, P. R., Q. Li, W. J. Zhang, and L. S. Guo. 2004. “Design, Modeling and Control of a Hybrid Machine System.” Mechatronics 14: 1197–1217. doi: 10.1016/j.mechatronics.2004.06.004
- Papalambros, P., and D. Wilde. 2000. Principles of Optimal Design: Modeling and Computation. Cambridge, NY: Cambridge University Press.
- Peters, D. L. 2010. “Coupling and Controllability in Optimal Design and Control.” PhD thesis, University of Michigan, Ann Arbor, MI.
- Peters, D. L., K. Kurabayashi, P. Y. Papalambros, and A. G. Ulsoy. 2008. “Co-Design of a MEMS Actuator and its Controller Using Frequency Constraints”. Proceedings of the ASME Dynamic Systems and Control Conferences, Ann Arbor, MI, October. Paper number DSCC 2008-2212.
- Peters, D. L., P. Y. Papalambros, and A. G. Ulsoy. 2010a. “Relationship Between Coupling and the Controllability Grammian in Co-Design Problems.” Proceedings of the 2010 American Control Conference, Baltimore, MD, June, 623–628.
- Peters, D. L., P. Y. Papalambros, and A. G. Ulsoy. 2010b. “Sequential Co-Design of an Artifact and Its Controller Via Control Proxy Functions”. Proceedings of the Fifth IFAC Symposium on Mechatronic Systems, Cambridge, MA, September.
- Peters, D. L., P. Y. Papalambros, and A. G. Ulsoy. 2011. “Control Proxy Functions for Sequential Design and Control Optimization.” Journal of Mechanical Design 133 (9): 00–00. doi: 10.1115/1.4004792
- Peters, D. L., P. Y. Papalambros, and A. G. Ulsoy. 2013. “Sequential Co-Design of an Artifact and its Controller Via Control Proxy Functions.” Mechatronics 23 (4): 409–418. doi: 10.1016/j.mechatronics.2013.03.003
- Peters, D. L., P. Y. Papalambros, and A. G. Ulsoy. 2015. “Relationship Between Coupling and the Controllability Grammian in Co-Design Problems.” Mechatronics 29 (1): 36–45. doi: 10.1016/j.mechatronics.2015.05.002
- Rao, J. S., and R. Tiwari. 2009. “Design Optimization of Double-Acting Hybrid Magnetic Thrust Bearings with Control Integration Using Multi-Objective Evolutionary Algorithm.” Mechatronics 19: 945–964. doi: 10.1016/j.mechatronics.2009.06.011
- Ravichandran, T., D. Wang, and G. Heppler. 2006. “Simultaneous Plant-Controller Design Optimization of a Two-Link Planar Manipulator.” Mechatronics 16: 233–242. doi: 10.1016/j.mechatronics.2005.09.008
- Raza, M. A., and W. Liang. 2012. “Uncertainty-Based Computational Robust Design Optimisation of Dual-Thrust Propulsion System.” Journal of Engineering Design 23 (8): 618–634. doi: 10.1080/09544828.2011.636011
- Reyer, J. 2000. “Combined Embodiment Design and Control Optimization: Effects of Cross-Disciplinary Coupling.” PhD thesis, University of Michigan, Ann Arbor, MI.
- Rieber, J. M., and D. G. Taylor. 2004. “Integrated Control System and Mechanical Design of a Compliant Two-Axes Mechanism.” Mechatronics 14: 1069–1087. doi: 10.1016/j.mechatronics.2004.04.008
- Rodriguez-Fortun, J. M., J. Orus, J. Alfonso, J. R. Sierra, F. Buil, F. Rotella, and J. A. Castellanos. 2012. “Model-Based Mechanical and Control Design of a Three-Axis Platform.” Mechatronics 22: 958–969. doi: 10.1016/j.mechatronics.2012.06.004
- Skogestad, S., and I. Postlethwaite. 2005. Multivariable Feedback Control: Analysis and Design. West Sussex: Wiley.
- Tsai, Y. T., K. H. Lin, and Y. Y. Hsu. 2013. “Reliability Design Optimisation for Practical Applications Based on Modelling Processes.” Journal of Engineering Design 24 (12): 849–863. doi: 10.1080/09544828.2013.863854
- Tung, Y. -C., and K., Kurabayashi. 2005a. “A Single-Layer PDMS-on-Silicon Hybrid Microactuator With Multi-Axis Out-of-Plane Motion Capabilities – Part I: Design and Analysis.” Journal of Microelectromechanical Systems 14: 548–557. doi: 10.1109/JMEMS.2005.844761
- Tung, Y. -C., and K. Kurabayashi. 2005b. “A Single-Layer PDMS-on-Silicon Hybrid Microactuator With Multi-Axis Out-of-Plane Motion Capabilities – Part II: Fabrication and Characterization.” Journal of Microelectromechanical Systems 14: 558–566. doi: 10.1109/JMEMS.2005.844762
- Villarreal-Cervantes, M. G., C. A. Cruz-Villar, J. Alvarez-Gallegos, and E. A. Portilla-Flores. 2013. “Robust Structure-control Design Approach for Mechatronic Systems.” IEEE/ASME Transactions on Mechatronics 18 (5): 1592–1601. doi: 10.1109/TMECH.2012.2208196
- Wan, J., Q. Li, and F. Wu. 2002. “Integrated Design and Control of a Closed-chain Mechanism.” Proceedings of the Seventh International Conference on Control, Automation, Robotics and Vision, Singapore, November, 1349–1353.
- Wolfram, H., R. Schmiedel, K. Hiller, T. Aurich, W. Gunther, S. Kurth, J. Mehner, W. Dotzel, and T. Gebner. 2005. “Model Building, Control Design and Practical Implementation of a High Precision, High Dynamical MEMS Acceleration Sensor.” Society of Photo-optical Instrumentation Engineers, Sevilla, Spain, May, 1–15.
- Xiao, M., L. Gao, X. Shao, H. Qiu, and P. Jiang. 2012. “A Generalised Collaborative Optimisation Method and Its Combination With Kriging Metamodels for Engineering Design.” Journal of Engineering Design 23 (5): 379–399. doi: 10.1080/09544828.2011.595706
- Yoshimura, M., M. Hasuike, T. Miyashita, and H. Yamakawa. 2013. “Evaluation of Industrial Machine Design Improvement Ideas Using Characteristic-Based Hierarchical Optimisation Strategies.” Journal of Engineering Design 24 (11): 794–813. doi: 10.1080/09544828.2013.862226