Multiple Life-Cycle Products: A Review of Antecedents, Outcomes, Challenges, and Benefits in a Circular Economy

References

• Abbey, J. D., and V. D. R. Guide. 2018. “A Typology of Remanufacturing in Closed-Loop Supply Chains.” International Journal of Production Research 56: 374–384.
   Web of Science ®Google Scholar
• Abramovici, M., J. C. Göbel, and P. Savarino. 2017. “Reconfiguration of Smart Products During Their use Phase Based on Virtual Product Twins.” CIRP Annuals 66: 165–168. doi:https://doi.org/10.1016/j.cirp.2017.04.042
   Web of Science ®Google Scholar
• Adeogun, O., A. Tiwari, and J. R. Alcock. 2010. “Informatics-based Product-Service Systems for Point-of-Care Devices.” CIRP Journal of Manufacturing Science and Technology 3: 107–115. doi:https://doi.org/10.1016/J.CIRPJ.2010.04.006
   Google Scholar
• Agrawal, S., and R. K. Singh. 2019. “Analyzing Disposition Decisions for Sustainable Reverse Logistics: Triple Bottom Line Approach.” Resources, Conservation and Recycling 150: 104448.
   Web of Science ®Google Scholar
• Aguilar Esteva, L. C., A. Kasliwal, M. S. Kinzler, H. C. Kim, and G. A. Keoleian. 2020. “Circular Economy Framework for Automobiles: Closing Energy and Material Loops.” Journal of Industrial Ecology, 13088.
   Web of Science ®Google Scholar
• Ahmad, S., K. Y. Wong, M. L. Tseng, and W. P. Wong. 2018. “Sustainable Product Design and Development: A Review of Tools, Applications and Research Prospects.” Resources, Conservation and Recycling.
   Web of Science ®Google Scholar
• Allwood, J. M., M. F. Ashby, T. G. Gutowski, and E. Worrell. 2011. “Material Efficiency: A White Paper.” Resour. Conserv. Recycl 55: 362–381.
   Web of Science ®Google Scholar
• Amelia, L., D. A. Wahab, C. H. Che Haron, N. Muhamad, and C. H. Azhari. 2009. “Initiating Automotive Component Reuse in Malaysia.” Journal of Cleaner Production 17 (17): 1572–1579.
   Web of Science ®Google Scholar
• Anthony, C., and W. M. Cheung. 2017. “Cost Evaluation in Design for end-of-Life of Automotive Components.” Journal of Remanufacturing 7 (1): 97–111.
   Google Scholar
• Ardente, F., M. Calero Pastor, F. Mathieux, and L. Talens Peiró. 2015. “Analysis of end-of-Life Treatments of Commercial Refrigerating Appliances: Bridging Product and Waste Policies.” Resources, Conservation and Recycling 101: 42–52.
   Web of Science ®Google Scholar
• Arnette, A. N., B. L. Brewer, and T. Choal. 2014. “Design for Sustainability (DFS): The Intersection of Supply Chain and Environment.” Journal of Cleaner Production 83: 374–390.
   Web of Science ®Google Scholar
• Atasu, A., and G. C. Souza. 2013. “How Does Product Recovery Affect Quality Choice?” Production and Operations Management 22: 991–1010. doi:https://doi.org/10.1111/J.1937-5956.2011.01290.X
   Web of Science ®Google Scholar
• Atlason, R. S., D. Giacalone, and K. Parajuly. 2017. “Product Design in the Circular Economy: Users’ Perception of end-of-Life Scenarios for Electrical and Electronic Appliances.” Journal of Cleaner Production 168: 1059–1069. doi:https://doi.org/10.1016/j.jclepro.2017.09.082
   Web of Science ®Google Scholar
• Aydin, R., and F. Badurdeen. 2019. “Sustainable Product Line Design Considering a Multi-Lifecycle Approach.” Resources, Conservation and Recycling 149: 727–737.
   Web of Science ®Google Scholar
• Badurdeen, F., R. Aydin, and A. Brown. 2018. “A Multiple Lifecycle-Based Approach to Sustainable Product Configuration Design.” Journal of Cleaner Production 200: 756–769.
   Web of Science ®Google Scholar
• Bakker, C. A., R. Wever, C. Teoh, and S. de Clercq. 2010. “Designing Cradle-to-Cradle Products: A Reality Check.” International Journal of Sustainable Engineering 3: 2–8.
   Google Scholar
• Baldassarre, B., G. Calabretta, N. M. P. Bocken, and T. Jaskiewicz. 2017. “Bridging Sustainable Business Model Innovation and User-Driven Innovation: A Process for Sustainable Value Proposition Design.” Journal of Cleaner Production 147: 175–186.
   Web of Science ®Google Scholar
• Bangsa, A. B., and B. B. Schlegelmilch. 2020. “Linking Sustainable Product Attributes and Consumer Decision-Making: Insights from a Systematic Review.” Journal of Cleaner Production 245: 118902.
   Web of Science ®Google Scholar
• Batista, L., M. Bourlakis, P. Smart, and R. Maull. 2018. “In Search of a Circular Supply Chain Archetype–a Content-Analysis-Based Literature Review.” Production Planning & Control 29: 438–451.
   Web of Science ®Google Scholar
• Bhamra, T., D. Lilley, and T. Tang. 2011. “Design for Sustainable Behaviour: Using Products to Change Consumer Behaviour.” The Design Journal 14 (4): 427–445.
   Web of Science ®Google Scholar
• Bhanot, N., P. V. Rao, and S. G. Deshmukh. 2017. “An Integrated Approach for Analysing the Enablers and Barriers of Sustainable Manufacturing.” Journal of Cleaner Production 142: 4412–4439.
   Web of Science ®Google Scholar
• Blomsma, F., and M. Tennant. 2020. “Circular Economy: Preserving Materials or Products? Introducing the Resource States Framework.” Resources, Conservation and Recycling 156: 104698.
   Web of Science ®Google Scholar
• Bocken, N. M. P., I. de Pauw, C. Bakker, and B. van der Grinten. 2016. “Product Design and Business Model Strategies for a Circular Economy.” Journal of Industrial and Production Engineering 33: 308–320.
   Web of Science ®Google Scholar
• Boehm, M., and O. Thomas. 2013. “Looking Beyond the rim of One’s Teacup: A Multidisciplinary Literature Review of Product-Service Systems in Information Systems, Business Management, and Engineering & Design.” Journal of Cleaner Production.
   PubMed Web of Science ®Google Scholar
• Bonvoisin, J., F. Halstenberg, T. Buchert, and R. Stark. 2016. “A Systematic Literature Review on Modular Product Design.” Journal of Engineering Design 27: 488–514.
   Web of Science ®Google Scholar
• Borrello, M., S. Pascucci, F. Caracciolo, A. Lombardi, and L. Cembalo. 2020. “Consumers are Willing to Participate in Circular Business Models: A Practice Theory Perspective to Food Provisioning.” Journal of Cleaner Production, 259.
   Web of Science ®Google Scholar
• Braungart, M., W. McDonough, and A. Bollinger. 2007. “Cradle-to-cradle Design: Creating Healthy Emissions - a Strategy for eco-Effective Product and System Design.” Journal of Cleaner Production 15: 1337–1348.
   Web of Science ®Google Scholar
• Bridgens, B., K. Hobson, D. Lilley, J. Lee, J. L. Scott, and G. T. Wilson. 2019. “Closing the Loop on E-Waste: A Multidisciplinary Perspective.” Journal of Industrial Ecology 23: 169–181.
   Web of Science ®Google Scholar
• Brockhaus, S., M. Petersen, and A. M. Knemeyer. 2019. “The Fallacy of “Trickle-Down” Product Sustainability: Translating Strategic Sustainability Targets Into Product Development Efforts.” International Journal of Operations & Production Management 39: 1166–1190.
   Web of Science ®Google Scholar
• Byggeth, S., Broman G., and Robèrt K. H. 2007. “A Method for Sustainable Product Development based on a Modular System Of Guiding Questions.” Journal of Cleaner Production 15: 1–11.
   Web of Science ®Google Scholar
• Camilleri, M. A. 2019. “The Circular Economy’s Closed Loop and Product Service Systems for Sustainable Development: A Review and Appraisal.” Sustainable Development 27: 530–536.
   Google Scholar
• Campbell-Johnston, K., M. Calisto Friant, K. Thapa, D. Lakerveld, and W. J. V. Vermeulen. 2020. “How Circular is Your Tyre: Experiences with Extended Producer Responsibility from a Circular Economy Perspective.” Journal of Cleaner Production 270.
   Web of Science ®Google Scholar
• Ceschin, F., and I. Gaziulusoy. 2016. “Evolution of Design for Sustainability: From Product Design to Design for System Innovations and Transitions.” Design Studies 47: 118–163.
   Web of Science ®Google Scholar
• Chakraborty, K., S. Mondal, and K. Mukherjee. 2017. “Analysis of Product Design Characteristics for Remanufacturing Using Fuzzy AHP and Axiomatic Design.” Journal of Engineering Design 28: 338–368.
   Web of Science ®Google Scholar
• Chouinard, U., D. C. A. Pigosso, T. C. McAloone, L. Baron, and S. Achiche. 2019. “Potential of Circular Economy Implementation in the Mechatronics Industry: An Exploratory Research.” Journal of Cleaner Production 239: 118014. doi:https://doi.org/10.1016/j.jclepro.2019.118014
   Web of Science ®Google Scholar
• Coates, G., and S. Rahimifard. 2008. “A Cost Estimation Framework to Support Increased Value Recovery from end-of-Life Vehicles.” International Journal of Computer Integrated Manufacturing, 21, 8, 895–910. doi:https://doi.org/10.1080/09511920801915218
   Web of Science ®Google Scholar
• Cooper, D. R., A. C. H. Skelton, M. C. Moynihan, and J. M. Allwood. 2014. “Component Level Strategies for Exploiting the Lifespan of Steel in Products.” Resources, Conservation and Recycling 84: 24–34.
   Web of Science ®Google Scholar
• Devanathan, S., D. Ramanujan, W. Z. Bernstein, F. Zhao, and K. Ramani. 2010. “Integration of Sustainability Into Early Design Through the Function Impact Matrix.” Journal of Mechanical Design, Transactions Of the ASME 132: 0810041–0810048.
   Web of Science ®Google Scholar
• Diaz, A., J.-P. Schöggl, T. Reyes, and R. J. Baumgartner. 2021. “Sustainable Product Development in a Circular Economy: Implications for Products, Actors, Decision-Making Support and Lifecycle Information Management.” Sustainable Production and Consumption 26: 1031–1045. doi:https://doi.org/10.1016/j.spc.2020.12.044
   Web of Science ®Google Scholar
• Diener, D. L., and A. M. Tillman. 2015. “Component end-of-Life Management: Exploring Opportunities and Related Benefits of Remanufacturing and Functional Recycling.” Resources, Conservation and Recycling 102: 80–93.
   Web of Science ®Google Scholar
• Domenech, T., and B. Bahn-Walkowiak. 2019. “Transition Towards a Resource Efficient Circular Economy in Europe: Policy Lessons from the EU and the Member States.” Ecological Economics 155: 7–19.
   Web of Science ®Google Scholar
• Dominish, E., M. Retamal, S. Sharpe, R. Lane, M. Rhamdhani, G. Corder, D. Giurco, and N. Florin. 2018. “Slowing” and “Narrowing” the Flow of Metals for Consumer Goods: Evaluating Opportunities and Barriers.” Sustainability 10: 1096.
   Web of Science ®Google Scholar
• Du, Y., H. Cao, F. Liu, C. Li, and X. Chen. 2012. “An Integrated Method for Evaluating the Remanufacturability of Used Machine Tool.” Journal of Cleaner Production 20: 82–91.
   Web of Science ®Google Scholar
• Duan, Y., and J. A. Aloysius. 2019. Supply Chain Transparency and Willingness-To-Pay for Refurbished Products.
   Google Scholar
• Dyllick, T., and Z. Rost. 2017. “Towards True Product Sustainability.” Journal of Cleaner Production 162: 346–360.
   Web of Science ®Google Scholar
• Elia, V., M. G. Gnoni, and F. Tornese. 2020. “Evaluating the Adoption of Circular Economy Practices in Industrial Supply Chains: An Empirical Analysis.” Journal of Cleaner Production 273: 122966.
   Web of Science ®Google Scholar
• Fang, H. C., S. K. Ong, and A. Y. C. Nee. 2014. Product Remanufacturability Assessment Based on Design Information, in: Procedia CIRP, 195–200. Elsevier B.V.
   Google Scholar
• Farel, R., B. Yannou, A. Ghaffari, and Y. Leroy. 2013. “A Cost and Benefit Analysis of Future end-of-Life Vehicle Glazing Recycling in France: A Systematic Approach.” Resources, Conservation and Recycling 74: 54–65.
   Web of Science ®Google Scholar
• Feriha, K. M., R. A. Hussein, G. A. Ismail, H. I. El-Naggar, and O. D. El-Sebaie. 2014. “Feasibility Study for end-of-Life Tire Recycling in new Tire Production, Egypt.” Journal of Environmental Engineering and Ecological Science 3: 5.
   Google Scholar
• Ferrão, P., and J. Amaral. 2006. “Design for Recycling in the Automobile Industry: New Approaches and new Tools.” Journal of Engineering Design 17: 447–462.
   Web of Science ®Google Scholar
• Field, J. M., and R. P. Sroufe. 2007. “The use of Recycled Materials in Manufacturing: Implications for Supply Chain Management and Operations Strategy.” International Journal of Production Research 45: 4439–4463.
   Web of Science ®Google Scholar
• Figge, F., A. S. Thorpe, P. Givry, L. Canning, and E. Franklin-Johnson. 2018. “Longevity and Circularity as Indicators of Eco-Efficient Resource Use in the Circular Economy.” Ecological Economics 150: 297–306.
   Web of Science ®Google Scholar
• Franco, M. A. 2017. “Circular Economy at the Micro Level: A Dynamic View of Incumbents’ Struggles and Challenges in the Textile Industry.” Journal of Cleaner Production 168: 833–845.
   Web of Science ®Google Scholar
• Franco, M. A. 2019. “A System Dynamics Approach to Product Design and Business Model Strategies for the Circular Economy.” Journal of Cleaner Production 241: 118327.
   Web of Science ®Google Scholar
• Gaustad, G., M. Krystofik, M. Bustamante, and K. Badami. 2018. “Circular Economy Strategies for Mitigating Critical Material Supply Issues.” Resources, Conservation and Recycling 135: 24–33.
   Web of Science ®Google Scholar
• Geissdoerfer, M., D. Vladimirova, and S. Evans. 2018. “Sustainable Business Model Innovation: A Review.” Journal of Cleaner Production 198: 401–416.
   Web of Science ®Google Scholar
• Go, T. F., D. A. Wahab, and H. Hishamuddin. 2015. “Multiple Generation Life-Cycles for Product Sustainability: The way Forward.” Journal of Cleaner Production 95: 16–29.
   Web of Science ®Google Scholar
• Go, T. F., D. A. Wahab, M. N. A. Rahman, R. Ramli, and C. H. Azhari. 2011. “Disassemblability of end-of-Life Vehicle: A Critical Review of Evaluation Methods.” Journal of Cleaner Production 19: 1536–1546.
   Web of Science ®Google Scholar
• Gunasekaran, A., and A. Spalanzani. 2012. “Sustainability of Manufacturing and Services: Investigations for Research and Applications.” International Journal of Production Economics 140: 35–47. doi:https://doi.org/10.1016/j.ijpe.2011.05.011
   Web of Science ®Google Scholar
• Hansen, E. G., and F. Revellio. 2020. “Circular Value Creation Architectures: Make, Ally, buy, or Laissez-Faire.” The Journal of Industrial Ecology 13016.
   Google Scholar
• Hatcher, G. D., W. L. Ijomah, and J. F. C. Windmill. 2013. “Integrating Design for Remanufacture Into the Design Process: The Operational Factors.” Journal of Cleaner Production 39: 200–208.
   Web of Science ®Google Scholar
• Hopkinson, P., R. De Angelis, and M. Zils. 2020. “Systemic Building Blocks for Creating and Capturing Value from Circular Economy.” Resources, Conservation and Recycling 155: 104672.
   Web of Science ®Google Scholar
• Iacovidou, E., J. Millward-Hopkins, J. Busch, P. Purnell, C. A. Velis, J. N. Hahladakis, O. Zwirner, and A. Brown. 2017. “A Pathway to Circular Economy: Developing a Conceptual Framework for Complex Value Assessment of Resources Recovered from Waste.” Journal of Cleaner Production 168: 1279–1288.
   Web of Science ®Google Scholar
• Ijomah, W. L., C. A. McMahon, G. P. Hammond, and S. T. Newman. 2007a. “Development of Design for Remanufacturing Guidelines to Support Sustainable Manufacturing.” Robotics and Computer-Integrated Manufacturing 23: 712–719.
   Web of Science ®Google Scholar
• Ijomah, W. L., C. A. McMahon, G. P. Hammond, and S. T. Newman. 2007b. “Development of Robust Design-for-Remanufacturing Guidelines to Further the Aims of Sustainable Development.” International Journal of Production Research 45: 4513–4536. doi:https://doi.org/10.1080/00207540701450138
   Web of Science ®Google Scholar
• Insanic, I., and L. E. Gadde. 2014. “Organizing Product Recovery in Industrial Networks.” International Journal of Physical Distribution & Logistics Management 44: 260–282.
   Web of Science ®Google Scholar
• Jawahir, I. S., K. E. Rouch, O. W. Dillon, L. Holloway, and A. Hall. 2007. “Design for Sustainability (DFS): New Challenges in Developing and Implementing a Curriculum for Next Generation Design and Manufacturing Engineers.” International Journal of Engineering Education 23 (6): 1053–1064.
   Web of Science ®Google Scholar
• Kane, G. M., C. A. Bakker, and A. R. Balkenende. 2018. “Towards Design Strategies for Circular Medical Products.” Resources, Conservation and Recycling 135: 38–47. doi:https://doi.org/10.1016/j.resconrec.2017.07.030
   Web of Science ®Google Scholar
• Khan, M. A., S. Mittal, S. West, and T. Wuest. 2018. “Review on Upgradability – A Product Lifetime Extension Strategy in the Context of Product Service Systems.” Journal of Cleaner Production 204: 1154–1168.
   Web of Science ®Google Scholar
• Kim, S., and S. K. Moon. 2017. “Sustainable Product Family Configuration Based on a Platform Strategy.” Journal of Engineering Design 28: 731–764.
   Web of Science ®Google Scholar
• Kissling, R., D. Coughlan, C. Fitzpatrick, H. Boeni, C. Luepschen, S. Andrew, and J. Dickenson. 2013. “Success Factors and Barriers in re-use of Electrical and Electronic Equipment.” Resources, Conservation and Recycling 80: 21–31.
   Web of Science ®Google Scholar
• Kissling, R., C. Fitzpatrick, H. Boeni, C. Luepschen, S. Andrew, and J. Dickenson. 2012. “Definition of Generic re-use Operating Models for Electrical and Electronic Equipment.” Resources, Conservation and Recycling 65: 85–99.
   Web of Science ®Google Scholar
• Koh, S. C. L., A. Gunasekaran, J. Morris, R. Obayi, and S. M. Ebrahimi. 2017. “Conceptualizing a Circular Framework of Supply Chain Resource Sustainability.” International Journal of Operations & Production Management 37: 1520–1540. doi:https://doi.org/10.1108/IJOPM-02-2016-0078
   Web of Science ®Google Scholar
• Krystofik, M., and G. Gaustad. 2018. “Tying Product Reuse Into Tying Arrangements to Achieve Competitive Advantage and Environmental Improvement.” Resources, Conservation and Recycling 135: 235–245.
   Web of Science ®Google Scholar
• Kuo, T. C., C. W. Hsu, K. C. Ku, P.-S. Chen, and C. H. Lin. 2012. “A Collaborative Model for Controlling the Green Supply Network in the Motorcycle Industry.” Advanced Engineering Informatics 26: 941–950. doi:https://doi.org/10.1016/J.AEI.2012.09.001
   Web of Science ®Google Scholar
• Landi, D., S. Gigli, M. Germani, and M. Marconi. 2018. “Investigating the Feasibility of a Reuse Scenario for Textile Fibres Recovered from end-of-Life Tyres.” Waste Management 75: 187–204.
   PubMed Web of Science ®Google Scholar
• Laurenti, R., R. Sinha, J. Singh, and B. Frostell. 2015. “Some Pervasive Challenges to Sustainability by Design of Electronic Products - A Conceptual Discussion.” Journal of Cleaner Production 108: 281–288.
   Web of Science ®Google Scholar
• Lee, S. Y., J. Hu, and M. K. Lim. 2021. “Maximising the Circular Economy and Sustainability Outcomes: An end-of-Life Tyre Recycling Outlets Selection Model.” International Journal of Production Economics 232, 107965. doi:https://doi.org/10.1016/j.ijpe.2020.107965
   Web of Science ®Google Scholar
• Lind, S., D. Olsson, and E. Sundin. 2014. “Exploring Inter-Organizational Relationships in Automotive Component Remanufacturing.” Journal of Remanufacturing 4: 1–14.
   Google Scholar
• Lonca, G., R. Muggéo, H. Imbeault-Tétreault, S. Bernard, and M. Margni. 2018. “Does Material Circularity Rhyme with Environmental Efficiency? Case Studies on Used Tires.” Journal of Cleaner Production 183: 424–435.
   Web of Science ®Google Scholar
• Ma, Y. S., H. B. Jun, H. W. Kim, and D. H. Lee. 2011. “Disassembly Process Planning Algorithms for end-of-Life Product Recovery and Environmentally Conscious Disposal.” International Journal of Production Research 49: 7007–7027.
   Web of Science ®Google Scholar
• Ma, J., and G. E. O. Kremer. 2016. “A Systematic Literature Review of Modular Product Design (MPD) from the Perspective of Sustainability.” The International Journal of Advanced Manufacturing Technology 86: 1509–1539.
   Web of Science ®Google Scholar
• Manninen, K., S. Koskela, R. Antikainen, N. Bocken, H. Dahlbo, and A. Aminoff. 2018. “Do Circular Economy Business Models Capture Intended Environmental Value Propositions?” Journal of Cleaner Production 171: 413–422. doi:https://doi.org/10.1016/j.jclepro.2017.10.003
   Web of Science ®Google Scholar
• Mayring, P. 2008. Qualitative Inhaltanalyse – Grundlagen und Techniken (Qualitative Content Analysis). Weinheim: Beltz Verlag.
   Google Scholar
• Mayyas, A., A. Qattawi, M. Omar, and D. Shan. 2012. “Design for Sustainability in Automotive Industry: A Comprehensive Review.” Renewable and Sustainable Energy Reviews 16: 1845–1862.
   Web of Science ®Google Scholar
• Meng, K., Y. Cao, X. Peng, V. Prybutok, and V. Gupta. 2019. “Demand-dependent Recovery Decision-Making of a Batch of Products for Sustainability.” International Journal of Production Economics 224, 107552, doi:https://doi.org/10.1016/J.IJPE.2019.107552.
   Web of Science ®Google Scholar
• Merli, R., M. Preziosi, and A. Acampora. 2018. “How Do Scholars Approach the Circular Economy? A Systematic Literature Review.” Journal of Cleaner Production 178: 703–722.
   Web of Science ®Google Scholar
• Mesa, J., I. Esparragoza, and H. Maury. 2018. “Developing a set of Sustainability Indicators for Product Families Based on the Circular Economy Model.” Journal of Cleaner Production.
   Web of Science ®Google Scholar
• Mesa, J., A. González-Quiroga, and H. Maury. 2020. “Developing an Indicator for Material Selection Based on Durability and Environmental Footprint: A Circular Economy Perspective.” Resources, Conservation and Recycling 160: 104887.
   Web of Science ®Google Scholar
• Mestre, A., and T. Cooper. 2017. “Circular Product Design. A Multiple Loops Life Cycle Design Approach for the Circular Economy.” Design of Journal 20: S1620–S1635.
   Web of Science ®Google Scholar
• Miemczyk, J., M. Howard, and T. E. Johnsen. 2016. “Dynamic Development and Execution of Closed-Loop Supply Chains: A Natural Resource-Based View.” Supply Chain Management: An International Journal 21: 453–469.
   Web of Science ®Google Scholar
• Mishra, J. L., P. G. Hopkinson, and G. Tidridge. 2018. “Value Creation from Circular Economy-led Closed Loop Supply Chains: A Case Study of Fast-Moving Consumer Goods.” Production Planning & Control 29: 509–521.
   Web of Science ®Google Scholar
• Moorhouse, Debbie, and Danielle Moorhouse. 2017. “Sustainable Design: Circular Economy in Fashion and Textiles.” Design of Journal 6925: S1948–S1959.
   Google Scholar
• Morana, R., and S. Seuring. 2007. “End-of-life Returns of Long-Lived Products from end Customer - Insights from an Ideally set up Closed-Loop Supply Chain.” International Journal of Production Research 45: 4423–4437.
   Web of Science ®Google Scholar
• Moreno, M., C. De los Rios, Z. Rowe, and F. Charnley. 2016. “A Conceptual Framework for Circular Design.” Sustainability 8.
   PubMed Web of Science ®Google Scholar
• Mugge, R., B. Jockin, and N. Bocken. 2017. “How to Sell Refurbished Smartphones? An Investigation of Different Customer Groups and Appropriate Incentives.” Journal of Cleaner Production 147: 284–296.
   Web of Science ®Google Scholar
• Mukherji, A., and J. D. Francis. 2008. “Mutual Adaptation in Buyer-Supplier Relationships.” Journal of Business Research 61: 154–161.
   Web of Science ®Google Scholar
• Murfield, M. L. U., and T. L. Esper. 2016. “Supplier Adaptation: A Qualitative Investigation of Customer and Supplier Perspectives.” Industrial Marketing Management 59: 96–106.
   Web of Science ®Google Scholar
• Oh, E.-T., K.-M. Chen, L.-M. Wang, and R.-J. Liu. 2015. “Value Creation in Regional Innovation Systems: The Case of Taiwan’s Machine Tool Enterprises.” Technological Forecasting and Social Change 100: 118–129.
   Web of Science ®Google Scholar
• Östlin, J., E. Sundin, and M. Björkman. 2008. “Importance of Closed-Loop Supply Chain Relationships for Product Remanufacturing.” International Journal of Production Economics 115: 336–348.
   Web of Science ®Google Scholar
• Paiola, M., N. Saccani, M. Perona, and H. Gebauer. 2013. “Moving from Products to Solutions: Strategic Approaches for Developing Capabilities.” European Management Journal 31: 390–409.
   Web of Science ®Google Scholar
• Pal, R., and J. Gander. 2018. “Modelling Environmental Value: An Examination of Sustainable Business Models Within the Fashion Industry.” Journal of Cleaner Production 184: 251–263.
   Web of Science ®Google Scholar
• Parajuly, K., K. Habib, C. Cimpan, G. Liu, and H. Wenzel. 2016. “End-of-life Resource Recovery from Emerging Electronic Products – A Case Study of Robotic Vacuum Cleaners.” Journal of Cleaner Production.
   Web of Science ®Google Scholar
• Parajuly, K., and H. Wenzel. 2017. “Product Family Approach in E-Waste Management: A Conceptual Framework for Circular Economy.” Sustainability 9: 768.
   Web of Science ®Google Scholar
• Parida, V., T. Burström, I. Visnjic, and J. Wincent. 2019. Orchestrating Industrial Ecosystem in Circular Economy: A Two-Stage Transformation Model for Large Manufacturing Companies.
   Google Scholar
• Pérez-Belis, V., C. Bakker, P. Juan, and M. D. Bovea. 2017. “Environmental Performance of Alternative end-of-Life Scenarios for Electrical and Electronic Equipment: A Case Study for Vacuum Cleaners.” Journal of Cleaner Production 159: 158–170.
   Web of Science ®Google Scholar
• Peters, K. 2016. “Methodological Issues in Life Cycle Assessment for Remanufactured Products: A Critical Review of Existing Studies and an Illustrative Case Study.” Journal of Cleaner Production.
   Web of Science ®Google Scholar
• Pinheiro, M. A. P., B. M. R. P. Seles, P. De Camargo Fiorini, D. Jugend, A. B. Lopes de Sousa Jabbour, H. M. R. da Silva, and H. Latan. 2019. “The Role of new Product Development in Underpinning the Circular Economy: A Systematic Review and Integrative Framework.” Management Decision.
   Web of Science ®Google Scholar
• Prosman, E. J., B. V. Wæhrens, and G. Liotta. 2017. “Closing Global Material Loops: Initial Insights Into Firm-Level Challenges.” Journal of Industrial Ecology 21: 641–650.
   Web of Science ®Google Scholar
• Ramani, K., D. Ramanujan, W. Z. Bernstein, F. Zhao, J. Sutherland, C. Handwerker, J. K. Ghoi, K. Harrisson, and D. Thurston. 2010. “Integrated Sustainable Life Cycle Design: A Review.” Journal of Mechanical Design 132: 091004.
   Web of Science ®Google Scholar
• Rocha, C. S., P. Antunes, and P. Partidário. 2019. “Design for Sustainability Models: A Multi-Perspective Review.” Journal of Cleaner Production 234: 1428–1445.
   Web of Science ®Google Scholar
• Sarigöllü, E., C. Hou, and M. Ertz. 2020. “Sustainable Product Disposal: Consumer Redistributing Behaviors Versus Hoarding and Throwing Away.” Business Strategy and the Environment, 1–17.
   Web of Science ®Google Scholar
• Schallehn, H., S. Seuring, J. Strähle, and M. Freise. 2019. “Customer Experience Creation for After-use Products: A Product–Service Systems-Based Review.” Journal of Cleaner Production.
   Web of Science ®Google Scholar
• Schöggl, J. P., R. J. Baumgartner, and D. Hofer. 2017. “Improving Sustainability Performance in Early Phases of Product Design: A Checklist for Sustainable Product Development Tested in the Automotive Industry.” Journal of Cleaner Production 140: 1602–1617.
   Web of Science ®Google Scholar
• Seuring, S., and S. Gold. 2012. “Conducting Content-Analysis Based Literature Reviews in Supply Chain Management.” Supply Chain Management: An International Journal 17: 544–555.
   Web of Science ®Google Scholar
• Seuring, S., and M. Muller. 2008. “From a Literature Review to a Conceptual Framework for Sustainable Supply Chain Management.” Journal of Cleaner Production 16 (15): 1699–1710.
   Web of Science ®Google Scholar
• Simões, C. L., R. Simoes, J. Carvalho, A. J. Pontes, and C. A. Bernardo. 2013. “The Quest for a Sustainable Product: An Environmental Study of Tyre Recyclates.” Materials & Design (1980-2015) 52: 196–206.
   Web of Science ®Google Scholar
• Simpson, D. 2010. “Use of Supply Relationships to Recycle Secondary Materials.” International Journal of Production Research 48: 227–249.
   Web of Science ®Google Scholar
• Singhal, D., S. Tripathy, and S. K. Jena. 2019. “Sustainability Through Remanufacturing of e-Waste: Examination of Critical Factors in the Indian Context.” Sustainable Production and Consumption 20: 128–139.
   Web of Science ®Google Scholar
• Sinha, R., R. Laurenti, J. Singh, M. E. Malmström, and B. Frostell. 2016. “Identifying Ways of Closing the Metal Flow Loop in the Global Mobile Phone Product System: A System Dynamics Modeling Approach.” Resources, Conservation and Recycling 113: 65–76.
   Web of Science ®Google Scholar
• Sodhi, R., M. Sonnenberg, and S. Das. 2004. “Evaluating the Unfastening Effort in Design for Disassembly and Serviceability.” Journal of Engineering Design 15: 69–90.
   Web of Science ®Google Scholar
• Sonego, M., M. E. S. Echeveste, and H. Galvan Debarba. 2018. “The Role of Modularity in Sustainable Design: A Systematic Review.” Journal of Cleaner Production.
   Web of Science ®Google Scholar
• Spangenberg, J. H. 2013. “Design for Sustainability (DfS): Interface of Sustainable Production and Consumption.” Handbook of Sustainable Engineering 18: 575–595.
   Google Scholar
• Steeneck, D. W., and S. C. Sarin. 2017. “Determining end-of-Life Policy for Recoverable Products.” International Journal of Production Research 55: 5782–5800. doi:https://doi.org/10.1080/00207543.2017.1334977
   Web of Science ®Google Scholar
• Sundin, E., and B. Bras. 2005. “Making Functional Sales Environmentally and Economically Beneficial Through Product Remanufacturing.” Journal of Cleaner Production 13: 913–925.
   Web of Science ®Google Scholar
• Talens Peiró, L., F. Ardente, and F. Mathieux. 2017. “Design for Disassembly Criteria in EU Product Policies for a More Circular Economy: A Method for Analyzing Battery Packs in PC-Tablets and Subnotebooks.” Journal of Industrial Ecology 21: 731–741.
   Web of Science ®Google Scholar
• Thomé, A. M. T., A. Scavarda, P. S. Ceryno, and A. Remmen. 2016. “Sustainable new Product Development: A Longitudinal Review.” Clean Technologies and Environmental Policy 18: 2195–2208.
   Web of Science ®Google Scholar
• Tonnelier, P., D. Millet, S. Richir, and M. Lecoq. 2005. “Is it Possible to Evaluate the Recovery Potential Earlier in the Design Process? Proposal of a Qualitative Evaluation Tool.” Journal of Engineering Design 16: 297–309. doi:https://doi.org/10.1080/09544820500126664
   Web of Science ®Google Scholar
• Tranfield, D., D. Denyer, and P. Smart. 2003. “Towards a Methodology for Developing Evidence-Informed Management Knowledge by Means of Systematic Review.” British Journal of Management 14 (3): 207–222.
   Web of Science ®Google Scholar
• UNEP. 2012. Responsible Resource Management for a Sustainable World: Findings from the International Panel. http://www.unep.org/resourcepanel-old/Portals/24102/PDFs/Metal_Recycling-ull_Report_150dpi_130919.pdf.
   Google Scholar
• Vanegas, P., J. R. Peeters, D. Cattrysse, P. Tecchio, and F. Ardente. 2018. Ease of Disassembly of Products to Support Circular Economy Strategies 135: 323–334.
   Google Scholar
• Van Loon, P., and L. N. Van Wassenhove. 2017. Assessing the Economic and Environmental impact of Remanufacturing: A Decision Support Tool for OEM Suppliers.
   Google Scholar
• Van Weelden, E., R. Mugge, and C. Bakker. 2016. “Paving the way Towards Circular Consumption: Exploring Consumer Acceptance of Refurbished Mobile Phones in the Dutch Market.” Journal of Cleaner Production 113: 743–754.
   Web of Science ®Google Scholar
• Villamil, C., and S. Hallstedt. 2020. “Sustainability Integration in Product Portfolio for Sustainable Development: Findings from the Industry.” Business Strategy and the Environment.
   PubMedGoogle Scholar
• Vlajic, J. V., R. Mijailovic, and M. Bogdanova. 2018. “Creating Loops with Value Recovery: Empirical Study of Fresh Food Supply Chains.” Production Planning & Control 29: 522–538.
   Web of Science ®Google Scholar
• Wang, J. J., J. J. Li, and J. Chang. 2016. “Product co-Development in an Emerging Market: The Role of Buyer-Supplier Compatibility and Institutional Environment.” Journal of Operations Management 46: 69–83.
   Web of Science ®Google Scholar
• Wang, H., Q. Peng, J. Zhang, and P. Gu. 2017. “Selective Disassembly Planning for the End-of-Life Product.” Procedia CIRP 60: 512–517.
   Google Scholar
• Wang, X. V., and L. Wang. 2017. “A Cloud-Based Production System for Information and Service Integration: An Internet of Things Case Study on Waste Electronics.” Enterprise Information System 11: 952–968.
   Web of Science ®Google Scholar
• Wastling, T., F. Charnley, and M. Moreno. 2018. “Design for Circular Behavior: Considering Users in a Circular Economy.” Sustainability 10.
   Web of Science ®Google Scholar
• Yang, S. S., N. Nasr, S. K. Ong, and A. Y. C. Nee. 2017. “Designing Automotive Products for Remanufacturing from Material Selection Perspective.” Journal of Cleaner Production 153: 570–579.
   Web of Science ®Google Scholar
• Yang, S. S., S. K. Ong, and A. Y. C. Nee. 2015. “EOL Strategy Planning for Components of Returned Products.” The International Journal of Advanced Manufacturing Technology 77: 991–1003.
   Web of Science ®Google Scholar
• Zhang, Y., S. Ren, Y. Liu, and S. Si. 2017. “A big Data Analytics Architecture for Cleaner Manufacturing and Maintenance Processes of Complex Products.” Journal of Cleaner Production 142: 626–641.
   Web of Science ®Google Scholar
• Zhu, H., J. Gao, D. Li, and D. Tang. 2012. “A Web-Based Product Service System for Aerospace Maintenance, Repair and Overhaul Services.” Computers in Industry 63: 338–348.
   Web of Science ®Google Scholar
• Zwolinski, P., and D. Brissaud. 2008. “Remanufacturing Strategies to Support Product Design and Redesign.” Journal of Engineering Design 19: 321–335.
   Web of Science ®Google Scholar