References
- Bhatia SK. Sustainable management of dredged sediments and waste using geotextile tube dewatering system. In: Babu GLS, Reddy KR, De A, et al., editor. Geoenvironmental practices and sustainability. Singapore: Springer; 2017. p. 91–97.
- Pileggi V, Budziakowski J, Manoharan M, et al. Design guidelines for sewage works. Toronto (ON): Ministry of the Environment; 2008.
- Wang LK, Li Y, Shammas NK, et al. Drying beds. In: Wang LK, Shammas NK, Hung Y, editor. Handbook of environmental engineering. Vol. 6, biosolids treatment processes. New Delhi: Humana Press; 2007. p. 403–430.
- Guimaraes MGA, Urashima DC, Vidal DM. Dewatering of sludge from a water treatment plant in geotextile closed systems. Geosynth Int. 2014;21(5):310–320. doi: 10.1680/gein.14.00018
- Morgan KR. Geotextile tubes and their application to dewatering [master’s thesis]. Statesboro (GA): Georgia Southern University; 2014.
- Smith J, Bhatia SK. Geotextile characterization and pore-size distribution: part I. A review of manufacturing processes. Geosynth Int. 1996;3(1):85–105. doi: 10.1680/gein.3.0055
- Moo-Young HK, Gaffney DA, Mo X. Testing procedures to assess the viability of dewatering with geotextile tubes. Geotext Geomembr. 2002;20(5):289–303. doi: 10.1016/S0266-1144(02)00028-6
- Fowler J, Bagby RM, Trainer E. Dewatering sewage sludge with geotextile tubes. Geotech Fabr Rep. 1997;15(7):26–30.
- Sobrino AD, Stephens T, Timpson C. Containment and dewatering of mine tailings with geotextile tubes at a Silver Mine in San Luiz, Mexico. In: Geosynthetics and Liners. Proceedings of the 20th International Conference on Tailings and Mine Waste; 2016 Oct 2–5; Keystone (CO). p. 685–691.
- Aydilek AH. Geotextile pore structure characterization using image analysis. In: Filters and drainage in geotechnical and environmental engineering. Proceedings of the 4th International Conference on Filters and Drainage in Geotechnical and Environmental Engineering; 2004 Oct 19–21; Stellenbosch (RSA).
- Aydilek AH, Edil TB. Evaluation of woven geotextile pore structure parameters using image analysis. Geotech Test J. 2004;27(1):1–12. doi: 10.1520/GTJ11070
- Muller WW, Saathoff F. Geosynthetics in geoenvironmental engineering. Sci Technol Adv Mater. 2015;16(3):1–20. doi: 10.1088/1468-6996/16/3/034605
- Aydilek AH, Oguz SH, Edil TB. Digital image analysis to determine pore opening size distribution of nonwoven geotextiles. J Comput Civil Eng. 2002;16(4):280–290. doi: 10.1061/(ASCE)0887-3801(2002)16:4(280)
- Standard test methods for determining apparent opening size of a geotextile. West Conshohocken (PA): ASTM International; 2016. Standard No. D4751-16.
- Bromley AJ, Holdich R, Cumming IW. Particulate fouling of surface microfilters with slotted and circular pore geometry. J Membr Sci. 2002;196(1):27–37. doi: 10.1016/S0376-7388(01)00573-7
- Chandler M, Zydney A. Effects of membrane pore geometry on fouling behaviour during yeast cell microfiltration. J Membr Sci. 2006;285(1-2):334–342. doi: 10.1016/j.memsci.2006.09.002
- Kanani DM, Fissell WH. Roy S, et al. Permeability-selectivity analysis for ultrafiltration: effect of pore geometry. J Membr Sci. 2010;349(1-2):405–410. doi: 10.1016/j.memsci.2009.12.003
- Clescerl LS, Greenberg AE, Eaton AD, editors. Standard methods for the examination of water and wastewater. 20th ed. Washington (DC): American Public Health Association; 1999.
- LaRue RJ, Cobbledick J, Aubry N, et al. The microscale flocculation test (MFT)-A high-throughput technique for optimizing separation performance. Chem Eng Res Des. 2016;105:85–93. doi: 10.1016/j.cherd.2015.10.045
- Mahdi FM, Holdich RG. Laboratory cake filtration testing using constant rate. Chem Eng Res Des. 2013;91(6):1145–1154. doi: 10.1016/j.cherd.2012.11.012
- Standard test methods for water permeability of geotextiles by permittivity. West Conshohocken (PA): ASTM International; 2017. Standard No. D4491/D4491M-17.
- Liao K, Bhatia S. Evaluation on filtration performance of woven geotextiles by falling head, pressure filtration test, and hanging bag tests. In: Geosynthetics. Proceedings of the 8th International Conference on Geosynthetics; 2006 Sept 18–22; Yokohama (JPN).