High temperature mechanical properties of cryogenically cooled alloy 718 weldments

References

• J. F. Radavich: ‘The physical metallurgy of cast alloy 718’, Conf. Proc. on ‘718’, (ed. E. A. Loria), 229–240; 1989.
   Google Scholar
• D. D. Krueger: ‘The development of direct aged 718 for gas turbine disk applications’, in ‘Proc. Conf. Superalloy 718-Metallurgy and Applications’, (ed. E. A. Loria), 279–296; 1989, Warrendale, PA, TMS.
   Google Scholar
• M. Sundararaman, P. Mukhopadhyay and S. Banerjee: ‘Some aspects of the precipitation of metastable intermetallic phases in INCONEL 718’, Metall. Mater. Trans. A, 1992, 23, 2015–2028.10.1007/BF02647549
   Web of Science ®Google Scholar
• A. Ulas and E. Boysan: ‘Numerical analysis of regenerative cooling in liquid propellant rocket engines’, Aerospace Sci. Technol., 2013, 24, 187–197.10.1016/j.ast.2011.11.006
   Web of Science ®Google Scholar
• J. J. Schirra, R. H. Caless and R. W. Hatala: ‘The effect of Laves phase on the mechanical properties of wrought and cast + HIP Inconel 718 superalloy’, in ‘Proc. of Conf. on 718 alloy’, (ed. E. A. Loria), 375–388; 1991, Connecticut, PA, TMS.
   Google Scholar
• W. J. Mills: ‘Effect of heat treatment on the tensile and fracture toughness behavior of alloy 718 weldments’, Weld J., 1984, 237–243.
   Google Scholar
• L. A. James: ‘Fatigue crack growth in Inconel 718 weldments at elevated temperatures’, Weld J., 1978, 17–25.
   Google Scholar
• S. M. Jones, J. Radavich and S. Tian: ‘Effect of composition on segregation microstructures and mechanical properties of cast alloy 718’, in ‘Conf. Proc. Superalloy 718 metallurgy and applications’, (ed. E. A. Loria), The minerals, metals and materials at high temperatures, 12, 589–596; 1994.
   Google Scholar
• C. Radhakrishna and K. Prasad Rao: ‘Studies on creep/stress rupture behavior of superalloy 718 weldments used in gas turbine applications’, Mater. High Temp., 1994, 12, (4), 323–331.
   Google Scholar
• S. G. K. Manikandan, D. Sivakumar, M. Kamaraj and K. P. Rao: ‘Laves phase control in Inconel 718 weldments’, Mater. Sci. Forum., 2012, 710, 614–619.10.4028/www.scientific.net/MSF.710
   Google Scholar
• S. G. K. Manikandan, D. Sivakumar, K. P. Rao and M. Kamaraj: ‘Effect of weld cooling rate on Laves phase formation in Inconel 718 fusion zone’, J. Mater. Proc. Technol., 2014, 214, (2), 358–364.10.1016/j.jmatprotec.2013.09.006
   Web of Science ®Google Scholar
• S. G. K. Manikandan, D. Sivakumar, K. P. Rao and M. Kamaraj: ‘Microstructural characterization of liquid nitrogen cooled Alloy 718 fusion zone’, J. Mater. Proc. Technol., 2014, 214, (12), 3141–3149.10.1016/j.jmatprotec.2014.07.022
   Web of Science ®Google Scholar
• S. G. K. Manikandan, D. Sivakumar D. Karthikesan, K. P. Rao and M. Kamaraj: ‘Frequency modulation effect on the solidification of Alloy 718 fusion zone’, Proc. Mater. Sci. Technol., 2013, 1, 1375–1361.
   Google Scholar
• S. G. K. Manikandan, D. Sivakumar K. P. Rao and M. Kamaraj: ‘Laves phase in alloy 718 fusion zone – microscopic and calorimetric studies’, Mater. Charact., 2015, 100, 192–206.10.1016/j.matchar.2014.11.035
   Web of Science ®Google Scholar
• A. Lingenfelter: ‘Welding of Inconel 718: A historical overview’, in ‘Proc. Conf. on Superalloy 718-Metallurgy and application’, (ed. E. A. Loria), 673–682; 1989.
   Google Scholar
• G. Çam and M. Koçak: ‘Progress in joining of advanced materials’, Int. Mater. Rev., 1998, 43, (1), 1–44.10.1179/imr.1998.43.1.1
   Web of Science ®Google Scholar
• N. L. Richards and M. C. Chaturvedi: ‘Effect of minor elements on weldability of nickel base superalloys’, Int. Met. Rev., 2000, 45, (3), 109–129.10.1179/095066000101528331
   Web of Science ®Google Scholar
• R. G. Thompson: ‘Microfissuring of alloy 718 in the weld HAZ’, J. Met., 1998, 40, 44–49.
   Google Scholar
• W. J. Mills: ‘Effect of microstructural variations on the tensile and fracture toughness properties of Inconel 718 weldments’, in ‘Proc. Conf. on 718 alloy’, (ed. E. A. Loria), 858; 1984, PA, TMS.
   Google Scholar
• G. M. Reddy, C. V. S. Murthy, K. S. Rao and K. P. Rao: ‘Improvement of mechanical properties of Inconel 718 electron beam welds—influence of welding techniques and postweld heat treatment’, Int. J Adv. Manuf. Technol., 2009, 43, 671–680.10.1007/s00170-008-1751-7
   Web of Science ®Google Scholar
• G. D. Janakiram, A. Venugopal Reddy, K. Prasad Rao and G. M. Reddy: ‘High temperature mechanical properties of Inconel 718 pulsed Nd – YAG laser welds’, Mater. High Temp., 2006, 23, (1), 29–37.10.1179/mht.2006.003
   Google Scholar
• G. D. Janakiram, A. V. Reddy, K. P. Rao, G. M. Reddy: ‘Control of laves phase in Inconel 718 GTA welds through the use of current pulsing’, In ‘Conf. Proc. Int. Heat Treat 2004’, Ind Inst Tech Madras, 2003.
   Google Scholar
• ‘Nickel alloy, corrosion and heat resistant, sheet, strip, foil, and plate 52.5Ni 19Cr 3.0Mo 5.1Cb 0.90Ti 0.50Al 18Fe consumable electrode or vacuum induction melted, 1775°F (968 °C) Solution Heat Treated’, AMS 5596 K: 2012.
   Google Scholar
• S. W. Banovic, J. N. Dupont and A. R. Marder: ‘Dilution and microsegregation in dissimilar metal welds between super austenitic stainless steel and nickel base alloys’, Sci. Technol. Weld. Joining, 2002, 7, (6), 374–383.10.1179/136217102225006804
   Web of Science ®Google Scholar
• S. W. Banovic, J. N. DuPont and A. R. Marder: ‘Dilution control in gas-tungsten-arc welds involving superaustenitic stainless steels and nickel-based alloys’, Metall. Mater. Trans. B, 2001, 32, (6), 1171–1176.10.1007/s11663-001-0104-9
   Web of Science ®Google Scholar
• X. J. Liu, H. H. Hu, J. J. Han, Y. Lu and C. P. Wang: ‘Assessment of the diffusional mobilities in fcc Ni–Nb and fcc Ni–Mo alloys’, Calphad, 2012, 38, 140–145.10.1016/j.calphad.2012.05.003
   Web of Science ®Google Scholar
• W. T. Loomis, J. W. Freeman and D. L. Sponseller: ‘The influence of molybdenum on the γ’ phase in experimental nickel based superalloys’, Metall. Trans. A, 1972, 3, (4), 989–1000.10.1007/BF02647677
   Web of Science ®Google Scholar
• D. L. Sponseller: ‘Differential thermal analysis of nickel base superalloys’ in ‘Superalloys-1996’, (ed. R. D. Kissinger, D. J. Deye, D. L. Anton, A. D. Cetel, M. V. Nathal, T. M. Pollack and D. A. Woodford), 259–270; 1996.
   Google Scholar
• K. Banerji: ‘Quantitative fractography – A modern perspective’, Metall. Trans. A, 1988, 19, 961–971.10.1007/BF02628381
   Web of Science ®Google Scholar
• G. D. J.Ram: ‘Effect of Laves phase on mechanical properties on Inconel 718 welds’, PhD thesis, Department of metallurgical and materials engineering, IIT Madras, Chennai, 2004.
   Google Scholar
• D. Han, F. Liu, D. Jia, F. Qi, H. Yang, W. Sun and Z. Hu: ‘Effect of Mo addition on the grain growth of IN718 alloy’, Mater. Sci. Forum, 2015, 816, 594–600.10.4028/www.scientific.net/MSF.816
   Google Scholar
• S. Kurokawa, J. E. Ruzzante, A. M. Hey and F. Dyment: ‘Diffusion of Nb in Fe and Fe alloys’, Met. Sci., 1983, 17, 433–438.10.1179/030634583790420628
   Web of Science ®Google Scholar
• L. Wang, Y. Yao and J. Dong: ‘Effect of cooling rates on segregation and density variation in the mushy zone during solidification of superalloy Inconel 718’, Chem. Eng. Commun., 2010, 197, (12), 1571–1585.10.1080/00986445.2010.493101
   Web of Science ®Google Scholar
• G. A. Knorovsky, M. J. Cieslak, T. J. Headley, A. D. Romig Jr and W. F. Hammetter: ‘Inconel 718: A solidification diagram’, Metall. Mater. Trans. A, 1989, 20, (10), 2149–2158.10.1007/BF02650300
   Web of Science ®Google Scholar