207
Views
0
CrossRef citations to date
0
Altmetric
Research Article

Visco-plastic constitutive model considering non-proportional hardening at elevated temperature under multiaxial loading

, &
Pages 469-481 | Received 06 Jul 2017, Accepted 25 Sep 2017, Published online: 09 Oct 2017

References

  • Dunne FPE , Hayhurst DR . Continuum damage based constitutive-equations for copper under high-temperature creep and cyclic plasticity. Proc R Soc A. 1992;437(1901):545–566.
  • Dunne FPE , Hayhurst DR . Modeling of combined high-temperature creep and cyclic plasticity in components using continuum damage mechanics. Proc Math Phys Sci. 1992;437(1901):567–589.
  • Chaboche JL , Rousselier G . On the plastic and viscoplastic constitutive equations -part 1: rules developed with internal variable concept. J Pressure Vessel Technol. 1983;105:153–158.10.1115/1.3264257
  • Chaboche JL , Rousselier G . On the plastic and viscoplastic constitutive equations -part 2: application of internal variable concepts to the 316 stainless steel. J Pressure Vessel Technol. 1983;105:159–164.10.1115/1.3264258
  • Lemaitre J , Chaboche JL . Mechanics of solid materials. Cambridge: Cambridge University Press; 1994.
  • Tong J , Vermeulen B . The description of cyclic plasticity and viscoplasticity of w waspaloy using unified constitutive equations. Int J Fatigue. 2003;25(5):413–420.10.1016/S0142-1123(02)00162-7
  • Tong J , Zhan ZL , Vermeulen B . Modelling of cyclic plasticity and viscoplasticity of a nickel-based alloy using Chaboche constitutive equations. Int J Fatigue. 2004;26(8):829–837.10.1016/j.ijfatigue.2004.01.002
  • Hyde CJ , Sun W , Leen SB . Cyclic thermo-mechanical material modeling and testing of 316 stainless steel. Int J Pressure Vessels Piping. 2010;87:365–372.10.1016/j.ijpvp.2010.03.007
  • Zhan Z , Fernando US , Tong J . Constitutive modelling of viscoplasticity in a nickel-based superalloy at high temperature. Int J Fatigue. 2008;30(7):1314–1323.10.1016/j.ijfatigue.2007.06.010
  • Saad AA , Hyde CJ , Sun W , et al . Thermal-mechanical fatigue simulation of a P91steel in a temperature range of 400–600 °C. Mater High Temp. 2011;28(3):212–218.10.3184/096034011X13072954674044
  • Barret RA , O’Donoghue P , Leen SB . An improved unified voscoplastic constitutive model for strain-rate sensitivity in high temperature fatigue. Int J Fatigue. 2013;48:192–204.10.1016/j.ijfatigue.2012.11.001
  • Yaguchi M , Yamamoto M , Ogata T . A viscoplastic constitutive model for nickel-base superalloy, part1: kinematic hardening rule of anisotropic dynamic recovery. Int J Plast. 2002;18:1083–1109.10.1016/S0749-6419(01)00029-8
  • Panhans S , Kreibig R . A viscoplastic material model of overstress type with a non-quadratic yield function. Eur J Mech A/Solids. 2006;25:283–298.10.1016/j.euromechsol.2005.08.002
  • Francois M . A plasticity model with yield surface distortion for non proportional loading. Int J Plast. 2001;17:703–717.10.1016/S0749-6419(00)00025-5
  • Zhou C , Chen Z , Lee JW . Implementation and application of a temperature-dependent Chaboche model. Int J Plast. 2015;75:121–140.10.1016/j.ijplas.2015.03.002
  • Ramezansefat H , Shahbeyk S . The Chaboche hardening rule: a re-evaluation of calibration procedures and a modified rule with an evolving material parameter. Mech Res Commun. 2015;69:150–158.10.1016/j.mechrescom.2015.08.003
  • Hosseini E , Holdsworth SR , Kuehn I . Temperature dependent representation for Chaboche kinematic hardening model. Mater High Temp. 2015;32(4):404–411.10.1179/1878641314Y.0000000036
  • Wali M , Chouchene H , Said LB . One-equation integration algorithm of a generalized quadratic yield function with Chaboche non-linear isotropic/kinematic hardening. Int J Mech Sci. 2015;92:223–232.10.1016/j.ijmecsci.2014.12.014
  • Mohanty S , Soppet WK . Chaboche-based cyclic material hardening models for 316 SS-316 SS weld under in-air and pressurized water reactor water conditions. Nucl Eng Des. 2016;305:524–530.10.1016/j.nucengdes.2016.05.031
  • Mohammadpour A , Chakherlou TN . Numerical and experimental study of an interference fitted joint using a large deformation Chaboche type combined isotropic-kinematic hardening law and mortar contact method. Int J Mech Sci. 2016;106:297–318.10.1016/j.ijmecsci.2015.10.012
  • Lillamand I , Barrallier L , Lalanne B , et al . Cyclic modelling of the mechanical state produced by shot-peening. Fatigue Fract Eng Mater Struct. 2001;24(2):94–104.
  • Pommier SN , Bompard P . Bauschinger effect of alloys and plasticity-induced crack closure: a finite element analysis. Fatigue Fract Eng Mater Struct. 2000;23(2):129–139.10.1046/j.1460-2695.2000.00259.x
  • Shahrooi S , Metselaar IH , Husa Z . Evaluating a strain energy fatigue method using cyclic plasticity models. Fatigue Fract Eng Mater Struct. 2010;33(8):530–537.10.1111/(ISSN)1460-2695
  • Shang DG , Sun GQ , Yan CL , et al . Creep-fatigue life prediction under fully-reversed multiaxial loading at high temperatures. Int J Fatigue. 2007;29(4):705–712.10.1016/j.ijfatigue.2006.06.010
  • Sun GQ , Shang DG , Bao M . Multiaxial fatigue damage parameter and life prediction under low cycle loading for GH4169 alloy and other structural materials. Int J Fatigue. 2010;32(7):1108–1115.10.1016/j.ijfatigue.2009.12.007
  • Socie DF , Marquis GB . Multiaxial fatigue. Warrendale, PA: Society of Automotive Engineers Inc.; 2000.10.4271/R-234
  • Kanazawa K , Miller KJ , Brown MW . Cyclic deformation of 1% Cr-Mo-V steel under out-of-phase loads. Fatigue Eng Mater Struct. 1979;2:217–228.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.