Application of a modified hyperbolic sine creep rate equation to correlate uniaxial creep rupture data of Sanicro 25 and HR6W

References

• Norwick AS, Machlin ES. Quantitative treatment of the creep of metals by dislocation and rate-process theories. No. NACA-TN-1039. Aircraft Engine Research Lab, 1946.
   Google Scholar
• Monkman FC, Grant NJ. An empirical relationship between rupture life and minimum creep rate in creep rupture. Proc ASTM. 1957;56:593.
   Google Scholar
• Larson FR, Miller J. A time-temperature relationship for rupture and creep stresses. Trans ASME. 1952;74:765–771.
   Google Scholar
• Wilshire B, Battenbough AJ. Creep and creep fracture of polycrystalline copper. Mater Sci Eng A. 2007;443(1–2):156–166.
   Web of Science ®Google Scholar
• Wilshire B, Scharning PJ. A new methodology for analysis of creep and creep fracture data for 9–12% chromium steels. Int Mater Rev. 2008;53(2):91–104.
   Web of Science ®Google Scholar
• Author.
   Google Scholar
• Sundararajan G. The Monkman-Grant relationship. Mater Sci Eng A. 1989;112:205–214.
   Web of Science ®Google Scholar
• Abe F. Stress to produce a minimum creep rate of 10−5%/h and stress to cause rupture at 105 h for ferritic and austenitic steels and superalloys. Int J Press Vessels Pip. 2008;85(1–2):99–107.
   Web of Science ®Google Scholar
• Ashby MF, Dyson BF. Cited by Dyson BF. In: Mishra RS, Earthman JC, Raj SV, editors. Proceedings of TMS symposium on creep deformation: fundamentals and applications. Seattle, USA; February 2002. p. 309–318.
   Google Scholar
• Kassner ME, Perez-Prado MT. Fundamentals of creep in metals and alloys. Elsevier Ltd; 2004.
   Google Scholar
• Weertman J. Steady -state creep through dislocation climb. J Appl Phys. 1957;28(3):362–364.
   Web of Science ®Google Scholar
• Karthikeyan S, Viswanathan GB, Mills MJ. Evaluation of the jogged-screw model of creep in equiaxed γ-TiAl: identification of the key substructural parameters. Acta Materialia. 2004;52(9):2577–2589.
   Web of Science ®Google Scholar
• Dyson BF, Osgerby S 1993. “Modelling and analysis of creep deformation and fracture in a 1Cr1/2Mo ferritic steel.” National Physical Laboratory Report DMM(A) 116, August.
   Google Scholar
• Garofalo F. An empirical relation defining the stress dependence of minimum creep rate in metals. Trans Metall Soc AIME. 1963;227:352–357.
   Google Scholar
• Evans WJ, Harrison GF. Comparison between the Sinh and effective stress equations for secondary creep rate. Mat Sci Eng. 1979;37(3):271–281.
   Web of Science ®Google Scholar
• Dyson B. Use of CDM in materials modeling and component creep life prediction. J Pressure Vessel Technol. 2000;122(3):281–296.
   Web of Science ®Google Scholar
• Xu Q. Development of advanced creep damage constitutive equations for low Cr alloy under long-term service. PhD diss., University of Huddersfield, 2016.
   Google Scholar
• Xu Q, Yang X, Zhongyu L. On the development of creep damage constitutive equations: a modified hyperbolic sine law for minimum creep strain rate and stress and creep fracture criteria based on cavity area fraction along grain boundaries. Mater High Temp. 2017;34(5–6):323–332.
   Web of Science ®Google Scholar
• Sidey D. The high temperature creep and fracture behavior of a 1- Pct CrMoV rotor steel. Metall Trans A. 1976;7(11):1785–1791.
   Web of Science ®Google Scholar
• Abe F, Tabuchi M, Hayakawa M. Influence of data scattering on estimation of 100,000 hrs creep rupture strength of alloy 617 at 700 C by Larson–Miller method. J Pressure Vessel Technol. 2017;139(1). DOI:https://doi.org/10.1115/1.4033290
   Google Scholar
• Shingledecker JP, Evans ND, Pharr GM. Influences of composition and grain size on creep–rupture behavior of Inconel® alloy 740. Mater Sci Eng A. 2013;578:277–286.
   Web of Science ®Google Scholar
• Zhang S, Takahashi Y. Creep and creep-fatigue deformation and life assessment of Ni-based alloy 740H and alloy 617. In ASME 2018 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers Digital Collection, 2018.
   Google Scholar
• Cedro V, Garcia C, Render M. Use of the Wilshire equations to correlate and extrapolate creep data of HR6W and Sanicro 25. Materials. 2018;11(9):1585.
   PubMed Web of Science ®Google Scholar
• Haque MS, Stewart CM. Metamodeling time-temperature creep parameters. J Pressure Vessel Technol. 2020;142(3):03154–1 to 14.
   Web of Science ®Google Scholar
• Chai G, Hernblom J, Hottle K, et al. Long term performance of newly developed austenitic heat resistant stainless steel grade UNS S31035. In ASME 2014 Symposium on Elevated Temperature Application of Materials for Fossil, Nuclear, and Petrochemical Industries. American Society of Mechanical Engineers Digital Collection, 2014. p. 37–43.
   Google Scholar
• Semba H et al. Creep strength and microstructure of Ni-base alloys for advanced USC boiler tubes and pipes. Joint EPRI-123HIMAT International Conference on Advances in High Temperature Materials. 2019. p. 513–522.
   Google Scholar
• Saito N, Komai N, Hashimoto K, et al. Long-term creep rupture properties and microstructures in HR6W (44Ni-23Cr-7W) for A-USC boilers. In Proceedings of the 8th International Conference on Advances in Materials Technology for Fossil Power Plants, Pine Cliffs Algarve, Portugal, 11-14 October 2016. p. 419–429.
   Google Scholar
• HR6W Material Data Sheet. [cited 2018 Apr 27]. Available from: www.tubular.nssmc.com/product-services/specialty-tube/product/hr6w
   Google Scholar
• Chai G, Forsberg U. Sanicro 25: an advanced high-strength, heat-resistant austenitic stainless steel. In: Materials for ultra-supercritical and advanced ultra-supercritical power plants. Woodhead Publishing; 2017. p. 391–421.
   Google Scholar
• Golański G, Merda A, Zieliński A, et al. Microstructure and mechanical properties of HR6W alloy dedicated for manufacturing of pressure elements in supercritical and ultrasupercritical power units. In E3S Web of Conferences, vol. 82. EDP Sciences, 2019. p. 01005.
   Google Scholar
• Tokairin T, Dahl KV, Danielsen HK, et al. Investigation on long-term creep rupture properties and microstructure stability of Fe–Ni based alloy Ni–23Cr–7W at 700° C. Mater Sci Eng A. 2013;565:285–291.
   Web of Science ®Google Scholar
• Cedro V, Garcia C, Render M. Addendum to use of the Wilshire equations to correlate and extrapolate creep rupture data of incoloy 800 and 304H stainless steel. Mater High Temp. 2020;37(4):page 278.
   Google Scholar
• He J, Rolf S. Basic modelling of creep rupture in austenitic stainless steels. Theor Appl Fract Mech. 2017;89:139–146.
   Web of Science ®Google Scholar
• Sanicro 25. Tube and pipe, seamless datasheet. [cited 2020 Jul 13]. Available from: https://www.materials.sandvik/en-us/materials-center/material-datasheets/tube-and-pipe-seamless/sanicro-25/
   Google Scholar
• Noguchi Y, Okada H, Semba H, et al. Isothermal, thermo-mechanical and bithermal fatigue life of Ni base alloy HR6W for piping in 700 C USC power plants. Procedia Eng. 2011;10:1127–1132.
   Google Scholar
• Case 2684. Ni-23Cr-7W, UNS N06674, alloy seamless pipe and tube. In Cases of ASME Boiler and Pressure Vessel Code. New York, NY, USA: American Society of Mechanical Engineers, 2011.
   Google Scholar
• American Society for Testing and Materials. ASTM E21–09: standard test method for elevated temperature tension tests of metallic materials. West Conshohocken (PA): ASTM, 2009.
   Google Scholar
• Xia A, Huang Y, Liu H, et al. Hot tensile and fracture behavior of 35CrMo steel at elevated temperatures and strain rates. Metals. 2016;6(9):210. .
   Web of Science ®Google Scholar
• Gopinath K, Gogia AK, Kamat SV, et al. Tensile properties of Ni-based superalloy 720Li: temperature and strain rate effects. Metall Mater Trans A. 2008;39(10):2340. .
   Web of Science ®Google Scholar
• Klueh RL, Oakee RE. High strain rate tensile properties of annealed 2 1/4Cr-1Mo steel. Annual ASME Meeting, Houston, TX, 1975.
   Google Scholar
• ECCC Recommendations Volumes. Volume 5 part Ia. 2014 [cited 2020]. Available from: http://eccc.c-s-m.it/layout_html_standard/en/eccc_european_creep_collaborative_committee/eccc_recommendations_volumes_2014.html
   Google Scholar