Characterisation of the austenitic steels Super 304H and HR3C after air and steam oxidation

References

• Rossa S. Sustainable development handbook. Lilbum: The Fairmont Press; 2008. 0-88173-565-5.
   Google Scholar
• Boyle G, Everett B, Ramage J. Energy Systems and Sustainability. Oxford: Oxford University Press; 2003. 0–19-926179-2.
   Google Scholar
• US Energy Information Administration. International energy outlook 2010. 2010. DOE/EIA-0484.
   Google Scholar
• J.B. Kitto, Developments in Pulverized Coal-Fired Boiler Technology, Conference:Missouri Valley Electric Association Engineering ConferenceAt: Kansas City, Missouri, April 10-12,1996, Publisher: Babcock & Wilcox Alliance, Ohio, U.S.A., . . .
   Google Scholar
• Nag P. Power Plant Engineering. New Delphi: Tata McGraw-Hill; 2008. p. 9780070648159.
   Google Scholar
• Dorf R. Coal Energy Systems. San Diego: Elsevier Academic Press; 2005. p. 0-12-497451-1.
   Google Scholar
• Lindsley D. Power-plant control and instrumentation The control of boilers and HRSG systems. London: The Institution of Electrical Engineers; 2005. p. 0–85296-765-9.
   Google Scholar
• Muller I, Muller W. Fundamentals of thermodynamics and applications: with historical annotations and many citations from Avogadro to Zermelo. Berlin: Springer; 2009. p. 978-3-540-74645-4.
   Google Scholar
• Wright I, Maziasz P, Ellis F, et al., Materials Issues for turbines for operation in ultra-supercritical steam. Clearwater: Proceedings of the 29th International Conference on Coal Utilization and Fuel Systems, 2004.
   Google Scholar
• Massoud M. Engineering thermofluids: thermodynamic, fluid mechanics and heat tranfer. Berlin: Springer; 2005.
   Google Scholar
• Buggea J, Kjæra S, Blum R. High-efficiency coal-fired power plants development and perspectives. Energy. 2006;31(10/11):1437.
   Web of Science ®Google Scholar
• Viswanathan, R., Sarver, J. & Tanzosh, J.M. Boiler materials for ultra-supercritical coal power plants—Steamside oxidation. J. of Materi Eng and Perform 15, 255–274 (2006).https://doi.org/https://doi.org/10.1361/105994906X108756, . . ;():.
   Google Scholar
• Viswanathan R, Purgert R, Rao U. Materials technology for advance coal power plants. Ohio: EPRI Meeting; 2002.
   Google Scholar
• Viswanathan R, Bakker W. Materials for Boilers in Ultra Supercritical power plants. Miami Beach: Proceedings of 2000 international Join Power Conference, 2000.
   Google Scholar
• Ennis P, Quadakkers W. Implications of steam oxidation for the service life of high-strength martensitic steel components in high-temperature plant. Int J Press Vessels Pip. 2007;84(1/2):82.
   Web of Science ®Google Scholar
• Ehlers J, Young DJ, Smaardijk E, et al. Enhanced oxidation of the 9%Cr steel P91 in water vapour containing environments. Corros Sci. 2006;48(11):3428.
   Web of Science ®Google Scholar
• Maziasz P, Wright I, Shingeldecker J, et al., Defining the Materials Issues and Research for Ultra-Supercritical Steam Turbines. Proceedings from the Fourth International Conference (ASM International), 2005. 4th International Conference on Advance Materials Technology for fossil Power Plants . pp. 602–620.
   Google Scholar
• Laverde D, Gomez-Acebo T, Castro F. Continuous and cyclic oxidation of T91 ferritic steel under steam. Corros Sci. 2004;46(3):613.
   Web of Science ®Google Scholar
• Rosser JC, Bass MI, Cooper C, et al. Steam oxidation of Super 304H and shot-peened Super 304H. Mater High Temp. 2012;29(2):95–106.
   Google Scholar
• Li J, Ma H, Wang Y, et al. Investigation on Oxidation Behavior of Super304Hand HR3C steel in high temperature steam from a 1000 MW Ultra-Supercritical Coal-Fired Boiler. Energies. 2019;12(3):521.
   Web of Science ®Google Scholar
• Golański G, Kolan C, Zieliński A, et al. Microstructure and mechanical properties of HR3C austenitic steel after service, Microstructure and mechanical properties of HR3C austenitic steel after service. Arch Mater Sci Eng. 2016;81(2):62–67.
   Google Scholar
• Bai X, Pan J, Chen G, et al. Effect of high temperature aging on microstructure and mechanical properties of HR3C heat resistant steel. Mater Sci Technol. 2014;30(2):205–210.
   Web of Science ®Google Scholar
• Sawada K, Sekido K, Murata M, et al. Precipitation behavior during aging and creep in 18Cr-9Ni-3Cu0-Nb -N steel. Mater Charact. 2018;141:285–297.
   Web of Science ®Google Scholar
• Peng B, Zhang H, Hong J, et al. The evolution of precipitates of 22Cr-25Ni-Mo-Nb-N heat-resistant austenitic steal in long-term creep. Mater Sci Eng A. 2010;527(16–17):4424–4430.
   Web of Science ®Google Scholar
• Golański G, Purzyńska H. Effect of service on microstructure and mechanical properties of Nb-stabilised austenitic stainless steel. Int J Press Vessels Pip. 2022;195:104574.
   Google Scholar
• Dudziak T, Deodeshmukh V, Backert L, et al. Phase Investigations under Steam Oxidation Process at 800 °C for 1000 h of Advanced Steels and Ni-Based Alloys. Oxid Met. 2016 87 ;139–158.
   Web of Science ®Google Scholar
• Dudziak T, Boron L, Deodeshmukh V, et al. Steam oxidation Behavior of Advanced Steels and Ni-Based Alloys at 800 <sup>°C. J Mater Eng Perform. 2017;26(3):1044–1056.
   Web of Science ®Google Scholar
• Dudziak T, Gajewski P, B.Śnieżyński VD, et al. Neural Network Modelling Studies of Steam Oxidised Kinetic Behaviour of Advanced Steels and Ni-based alloys at 800 °C for 3000 hours. Corros Sci. 2018;133(1):94–111.
   Google Scholar
• Fry T, Osgerby S, Wright M. Oxidation of Alloys in Steam Environments - A Review. NPL Report MATC(A)90. 2002.
   Google Scholar
• Dudziak T, Łukaszewicz M, Simms N, et al. Steam oxidation of TP347HFG, super 304H and HR3C – analysis of significance of steam flowrate and specimen surface finish. Corros Eng Sci Technol. 2015;50(4):272–282.
   Web of Science ®Google Scholar
• Quadakkers WJ, Naumenko D, Wessel E. Growth Rates of Alumina Scales on Fe–Cr–Al Alloys. Oxid Met. 2004;61(1/2):17.
   Web of Science ®Google Scholar
• Zurek J, Hierro LN, Piron Abellan J, et al. Effect of alloying additions in ferritic 9 12%Cr steels on the temperature dependence of the steam oxidation resistance. In: 6th International Symposium on HighTemperature Corrosion and Protection of Materials. 2004. Les Embiez France: Trans Tech Publications Ltd 791–798 .
   Google Scholar
• Elbakhshwan MS, Gill SK, Rumaiz AK, et al. High-temperature oxidation of advanced FeCrNi alloy in steam Environments. Appl Surf Sci. 2017;426:562–571.
   Web of Science ®Google Scholar
• Zurek J, Nieto-Hierro L, Ennis PJ, et al., Oxidation behavior of ferritic and austenitic steels in simulated steam environments. 371–387. Proc Hilton Head; 2005.
   Google Scholar
• Lepingle V, Louis G, Petelot D, et al. High-temperature corrosion behavior of some boiler steels in pure water vapor. Mater Sci Forum. 2001;369–372:239–246.
   Google Scholar
• Otsuka N, Fujikawa H. Scaling of austenitic stainless steels and Ni-base alloys in high-temperature steam at 973K. Corrosion. 1991;47(4):240–248.
   Web of Science ®Google Scholar
• Dooley RB. Program on Technology Innovation: oxide Growth and Exfoliation on Alloys Exposed to Steam. Report 1013666. Electric Power Research Institute (EPRI); 2007.
   Google Scholar
• Young DJ, Pint BA. Chromium volatilization rates from Cr2O3 Scales into flowing gases containing water Vapor. Oxid Met. 2006;66(3–4):137–153.
   Web of Science ®Google Scholar
• Dooley RB, Paterson SJ. Oxide growth and exfoliation in steam: plant experience. paper presented at the EPRI-NPL Workshop on Scale Growth and Exfoliation in Steam Plant. Teddington, England: National Physical Laboratory; 2003.
   Google Scholar
• Iseda A, Okada H, Semba H, et al. Long term creep properties and microstructure of Super304H, TP347HFG and HR3C for A-USC boilers. Energy Mater. 2007;2(4):199–206.
   Google Scholar
• Golański G, Zieliński A, Purzyńska H. Precipitation process in creep-resistant austenitic steels. In: Borek W, Tański T, Brytan Z, editors. Austenitic stainless steels. Rijeka Croatia: InTech; 2017. p. 93–112.
   Google Scholar