High-temperature corrosion data and mechanisms for T122, Super304H and HR3C after 15 years in 1000MW ultra-supercritical power plant

References

• Ning Z, Zhou Q, Liu Z, et al. Effects of imposed stresses on high temperature corrosion behaviour of T91. Corros Sci. 2021;189:189.
   Web of Science ®Google Scholar
• Yoshino M, Mishima Y, Toda Y, et al. Phase equilibrium between austenite and MX carbonitride in a 9Cr-1Mo-V-Nb Steel. ISIJ Inter. 2005;45(1):107–115.
   Web of Science ®Google Scholar
• Zhang J, Hu Z, Zhai G, et al. Creep damage characteristics and evolution of HR3C austenitic steel during long term creep. Mater Sci Eng A. 2022;832:142432.
   Web of Science ®Google Scholar
• Okada H, Igarashi M, Yamamoto S, et al. Long-term service experience with advanced austenitic alloys in Eddystone power station. ASME 2007 Pressure Vessels and Piping Conference San Antonio, Texas, USA; 2007: 181–188.
   Google Scholar
• Mogire EO, Higginson RL, Fry AT, et al. Microstructural characterization of oxide scales formed on steels P91 and P92. Mater High Temp. 2014;28(4):361–368.
   Google Scholar
• Li X, Cai Z, Chen X et al Characterization and formation mechanism of ultra-fine ferrite grains in dissimilar metal weld between austsenitic stainless steel and low alloy ferritic steel, et al. Mater Charact. 2021;171:.
   Web of Science ®Google Scholar
• DuPont JN. Microstructural evolution and high temperature failure of ferritic to austenitic dissimilar welds. Int Mater Rev. 2013;57(4):208–234.
   Web of Science ®Google Scholar
• Maslar JE, Hurst WS, Bowers WJ, et al. In situ Raman spectroscopic investigation of chromium surfaces under hydrothermal conditions. Appl Surf Sci. 2001;180(1–2):102–118.
   Web of Science ®Google Scholar
• Bakic GM, Djukic MB, Rajicic B, et al. Oxidation behavior during prolonged service of boiler tubes made of 2.25Cr1Mo and 12Cr1Mo0.3V heat resistance steels. Procedia Struct Integr. 2016;2:3647–3653.
   Google Scholar
• Lukaszewicz M, Simms NJ, Dudziak T, et al. Characterisation of oxide scales developed on high temperature resistant alloys in pure steam environments. Mater High Temp. 2014;29(3):210–218.
   Google Scholar
• Komai N, Masuyama F, Igarashi M. 10-Year Experience With T23(2.25Cr-1.6W) and T122(12Cr-0.4Mo-2W) in a Power Boiler. J Pressure Vessel Technol. 2005;127(2):190–196.
   Web of Science ®Google Scholar
• Bao H-S, Cheng S-C, Liu Z-D, et al. Aging precipitates and strengthening mechanism of T122 boiler steel. J Iron and Steel Res Int. 2010;17(2):67–73.
   Web of Science ®Google Scholar
• Dudziak T, Rząd E, Golański G, et al. Characterisation of the austenitic steels Super 304H and HR3C after air and steam oxidation. Mater High Temp. 2022;39(3):206–219.
   Google Scholar
• Li J, Ma H, Wang Y et al, Investigation on Oxidation Behavior of Super304H and HR3C Steel in High Temperature Steam from a 1000MW Ultra-Supercritical Coal-Fired Boiler, et al. Energies. 2019;12:3.
   Web of Science ®Google Scholar
• Ma H, Wang Y, Liang Z, et al. Investigation on high temperature corrosion characteristic of Super304H, TP347H, and HR3C steel in an ultra-supercritical coal-fired boiler. Fuel Cells. 2020;21(1):24–30.
   Web of Science ®Google Scholar
• Sawada K, Sekido K, Murata M, et al. Precipitation behavior during aging and creep in 18Cr–9Ni–3Cu–Nb–N steel. Mater Charact. 2018;141:279–285.
   Web of Science ®Google Scholar
• Golański G, Kolan C, Zieliński A, et al. Microstructure and mechanical properties of HR3C austenitic steel after service. Arch Mater Sci Eng. 2016;81(2):62–67.
   Google Scholar
• Jin Q, Dai G, Wang Y, et al. High-temperature corrosion of water-wall tubes in oxy-combustion atmosphere. J Energy Inst. 2020;93(4):1305–1312.
   Web of Science ®Google Scholar
• Halvarsson M, Tang JE, Asteman H, et al. Microstructural investigation of the breakdown of the protective oxide scale on a 304 steel in the presence of oxygen and water vapour at 600°C. Corros Sci. 2006;48(8):2014–2035.
   Web of Science ®Google Scholar
• Cao G, Firouzdor V, Sridharan K, et al. Corrosion of austenitic alloys in high temperature supercritical carbon dioxide. Corros Sci. 2012;60:246–255.
   Web of Science ®Google Scholar
• Yu Z, Lu J, Chen M, et al. Effect of pre-oxidation on hot corrosion resistance of HR3C stainless steel in sulfate salt with or without Fe2O3. Corros Sci. 2021;192:109789
   Web of Science ®Google Scholar
• Tang C, Pan W, Zhang J, et al. A comprehensive review on efficient utilization methods of High-alkali coals combustion in boilers. Fuel. 2022;316:123269.
   Web of Science ®Google Scholar
• Guo H, Fan W, Liu Y, et al. Dynamic simulation on high-temperature corrosion behaviour of tube surface with fouling in utility boiler fired by high-chlorine coal. J Energy Inst. 2021;95:120–131.
   Web of Science ®Google Scholar
• Jamrozik P, Sozańska M. Evaluation of the applicability of sanicro 25 steel in supercritical boilers. Solid State Phenom. 2013;212:201–204.
   Google Scholar
• Wei B, Tan H, Wang Y, et al. Investigation of characteristics and formation mechanisms of deposits on different positions in full-scale boiler burning high alkali coal. Appl Therm Eng. 2017;119:449–458.
   Web of Science ®Google Scholar
• Kim ES. Fracture analysis of tube boiler for physical explosion accident. Forensic Sci Int. 2017;278:e1–e7.
   PubMed Web of Science ®Google Scholar
• Xue S, Guo R, Hu F, et al. Analysis of the causes of leakages and preventive strategies of boiler water-wall tubes in a thermal power plant. Eng Fail Anal. 2020;110:104381.
   Web of Science ®Google Scholar
• Qi J, Zhou K, Huang J, et al. Influence of temperature on the oxide spallation of T91 alloy superheater tubes in power plant. Appl Therm Eng. 2018;128:244–252.
   Web of Science ®Google Scholar
• Lee N-H, Kim S, Choe B-H, et al. Failure analysis of a boiler tube in USC coal power plant. Eng Fail Anal. 2009;16(7):2031–2035.
   Web of Science ®Google Scholar
• Yoo K-B, He Y, Lee H-S, et al. Study of the scale formed on super 304H boiler tube steels after long-term steam oxidation at high temperatures. Mater Charact. 2018;146:71–80.
   Web of Science ®Google Scholar
• Popela T, Skoumalová Z, Macák J, et al. Evaluation of exfoliation issues in the fossil-fueled power plant. J Achieve Mater Manuf Eng. 2014;64(2):72–77.
   Google Scholar
• San XY, Zhang B, Wu B, et al. Investigating the effect of Cu-rich phase on the corrosion behavior of Super 304H austenitic stainless steel by TEM. Corros Sci. 2018;130:143–152.
   Web of Science ®Google Scholar
• Nava-Paz JC, Plumley AL, Chow OK, et al. Waterwall corrosion mechanisms in coal combustion environments. Mater High Temp. 2014;19(3):127–137.
   Google Scholar
• El Kamel M, Galtayries A, Vermaut P, et al. Sulfidation kinetics of industrial steels in a refinery crude oil at 300 °C: reactivity at the nanometer scale. Surf Interface Anal. 2010;42(6–7):605–609.
   Web of Science ®Google Scholar
• Lu J, Yang Z, Li Y, et al. Fireside corrosion behaviors of Super304H and HR3C in Coal Ash/Gas environment with different SO2 contents at 650 °C. J Mater Eng Perform. 2018;27(6):2855–2862.
   Web of Science ®Google Scholar