References
- Arce Recatala, M., Garcia Morales, S., & Van Den Bossche, N. (2019). Pressure-equalised facade systems: Evaluation of current watertightness test standards used to assess the performance of enclosure components. Journal of Building Physics, 43(5), 1–29. https://doi.org/10.1177/1744259119880284
- ASTM Subcommittee E06.51.2015. (2015). Method for field determination of water penetration of installed exterior windows, skylights, doors, and curtain walls, by uniform or cyclic static air pressure difference (ASTM E1105-15). ASTM International.
- Beech, J., & Turner, C. (1983). Cyclic joint movements. Building Research & Information, 11(5), 287–291. https://doi.org/https://doi.org/10.1080/09613218208551156
- Belgisch Instituut voor Normalisatie. (2017). NBN B 25-002-1, External window work – part 1 – prescription of general performances – windows and curtain walls. BIN.
- Chew, M. (2000). Joint sealant for wall cladding. Polymer Testing, 19(6), 643–651. https://doi.org/https://doi.org/10.1016/S0142-9418(99)00038-0
- Chew, M. (2005). Defect analysis in wet areas of buildings. Construction and Building Materials, 19(3), 165–173. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2004.07.005
- Cornick, S., & Lacasse, M. (2005). A review of climate loads relevant to assessing the watertightness performance of walls, windows and wall-window interfaces. Journal of ASTM International, 2(10), 1–16. https://doi.org/https://doi.org/10.1520/JAI12505
- Dominguez-Hernandez, J., Pérez-Bella, J., Alonsa-Martinez, M., Cano-Sunen, E., & del Coz-Diaz, J. (2017). Assessment of water penetration risk in building facades throughout Brazil. Building Research & Information, 45(5), 492–507. https://doi.org/https://doi.org/10.1080/09613218.2016.1183441
- European Committee for Standardization. (2000). EN 12208, windows and doors – watertightness – classification. CEN.
- European Committee for Standardization. (2001). EN 12865, hygrothermal performance of building components and building elements – determination of the resistance of external wall systems to driving rain under pulsating air pressure. CEN.
- European Committee for Standardization. (2016). EN 1027, windows and doors – watertightness – test method. CEN.
- European Committee for Standardization. (2016). EN 12211, windows and doors – resistance to wind load – test method. CEN.
- Farrington, E. S., Anderson, T., Grant, L., & Seraderian, R. (2019). Precast concrete-to-precast-concrete facade joints using precompressed expandable foam. PCI Journal, 64(6), 80–91. https://doi.org/10.15554/pcij64.6-05
- Fufa, S. M., Labonnote, N., Frank, S., Petra, R., & Jelle, B. P. (2018). Durability evaluation of adhesive tapes for building applications. Construction and Building Materials, 161, 528–538. https://doi.org/https://doi.org/10.1016/j.conbuildmat.2017.11.056
- Hershfield, M. (1996). Survey of building envelope failures in the coastal climate of British Columbia. Canada Mortgage and Housing Corporation.
- The House of Representatives. (2003). Weathertightness of buildings in New Zealand.
- Huff, D. N. (2008, May 11–14). Non-destructive testing of elastomeric joint sealants in construction. 11th DBMC International Conference of Durability of Building Materials and Components, Istanbul, Turkey.
- ift-Rosenheim. (2007). ift-Richtlinie MO-01/1 wall connection of windows – part 1: Method to determine the fitness for use of weatherproofing systems.
- International Organisation for Standardization. (2015). ISO 19862 buildings and civil engineering works – sealants – durability to extension compression cycling under accelerated weathering.
- Jansson, A. (2014, June 15–19). Action against moisture damage in ETIC walls. NSB Building Physics Symposium.
- Künzel, H., Zirkelbach, D., Karagiozis, A., Holm, A., & Sedbauer, K. (2008, May 11–14). Simulating water leaks in external walls to check the moisture tolerance of building assemblies in different climates. 11th International Conference on Durability of Building Materials and Components, Istanbul, Turkey.
- Kvande, T., Bakken, N., Bergheim, E., & Thue, V. J. (2018). Durability of ETICS with rendering in Norway – experimental and field investigations. Buildings, 8(93). https://doi.org/10.3390/buildings8070093
- Lacasse, M. A., O'Connor, T. J., & Nunes, S. (2003). Report from task 6 of MEWS project – experimental assessment of water penetration and entry into wood-frame wall specimens. National Research Council Canada.
- Lacasse, M., Miyauchi, H., & Hiemstra, J. (2009). Water penetration of cladding components – results from laboratory tests on simulated sealed vertical and horizontal joints of wall cladding. Journal of ASTM International, 6(6), 1–29. https://doi.org/https://doi.org/10.1520/JAI102048
- Lacasse, M., Van Den Bossche, N., Van Linden, S., & Moore, T. (2019, September 2–5). A brief compendium of water entry results derived from laboratory tests of various types of wall assemblies. Central European Symposium on Building Physics, Prague, Czech Republic.
- Olsson, L. (2015, June 14–17). Long-term field measurements of moisture in wooden walls with different types of facades: Focus on driving rain tightness. 6th International Building Physics Conference.
- Pérez-Bella, J., Dominguez-Hernandez, J., Cano-Sunen, E., del Coz-Diaz, J., & Alvarez Rabanal, F. (2015). Improvement alternatives for determining the watertightness performance of building facades. Building Research & Information, 43(6), 723–736. https://doi.org/https://doi.org/10.1080/09613218.2014.943101
- Pérez-Bella, J., Dominguez-Hernandez, J., Rodriguez-Soria, B., del Coz-Diaz, J., & Cano-Sunen, E. (2013). A new method for determining the water tightness of building facades. Building Research & Information, 41(4), 401–414. https://doi.org/https://doi.org/10.1080/09613218.2013.774936
- Pérez-Bella, J., Dominguez-Hernandez, J., Rodriguez-Soria, B., del Coz-Diaz, J., Cano-Sunen, E., & Navarro-Manso, A. (2013). An extended method for comparing watertightness tests for facades. Building Research & Information, 41(6), 706–721. https://doi.org/https://doi.org/10.1080/09613218.2013.823538
- RILEM TC 139-DBS. (2001). Recommendations of RILEM TC 139-DBS: Durability of building sealants: Durability test method. In Materials and structures (pp. 579–588). RILEM Publications SARL. https://doi.org/https://doi.org/10.1617/13782
- Sahal, N., & Lacasse, M. (2005). Water entry function of a hardboard siding-clad wood stud wall. Building and Environment, 40(11), 1497–1491. https://doi.org/https://doi.org/10.1016/j.buildenv.2004.11.019
- Sahal, N., & Lacasse, M. A. (2008). Proposed method for calculating water penetration test parameters of wall assemblies as applied to Istanbul, Turkey. Building and Environment, 43(7), 1250–1260. https://doi.org/https://doi.org/10.1016/j.buildenv.2007.03.009
- Standardization, E. C. (2019). EN 14187-9 cold applied joint sealants – test methods – part 9: Function testing of joint sealants. CEN.
- Van Den Bossche, N., Janssens, A., Moore, T., & Lacasse, M. (2020). Development of numerical model for determination of pressure equalization in facades during wet conditions. Building and Environment, 178. https://doi.org/https://doi.org/10.1016/j.buildenv.2020.106919
- Woolman, R., & Hutchinson, A. (1994). Resealing of buildings: A guide to good practice. Engineering.