References

• António , CA , Davim , JP and Lapa , V . 2008 . Artificial neural network based on genetic learning for machining of polyetheretherketone composite materials . International Journal of Advanced Manufacturing Technology , 39 : 1101 – 1110 .
   Web of Science ®Google Scholar
• Bernardos , PG and Vosniakos , GC . 2003 . Predicting surface roughness in machining: a review . International Journal of Machine Tools and Manufacture , 43 : 833 – 844 .
   Web of Science ®Google Scholar
• Bhuhan , B . 1999 . Principles and Applications of Tribology , New York : Wiley .
   Google Scholar
• Davim , PJ , Gaitonde , VN and Karnik , SR . 2008 . Investigations into the effect of cutting conditions on surface roughness in turning of free machining steel by ANN models . Journal of Material Processing Technology , 205 : 16 – 23 .
   Web of Science ®Google Scholar
• Davim , JP and Mata , F . 2007 . New machinability study of glass fibre reinforced plastics using polycrystalline diamond and cemented carbide (K15) tools . Materials & Design , 28 : 1050 – 1054 .
   Web of Science ®Google Scholar
• Davim , JP and Mata , F . 2008 . Chemical vapor deposition (CVD) diamond coated tools performance in machining of PEEK composites . Materials & Design , 29 : 1568 – 1574 .
   Web of Science ®Google Scholar
• Davim , JP , Reis , P , Lapa , V and Antonio , CC . 2003 . Machinability Study on Polyetheretherketone (PEEK) Unreinforced and Reinforced (GF30) for Applications in Structural Components . Composite Structures , 62 : 67 – 73 .
   Web of Science ®Google Scholar
• Davim , JP and Reis , P . 2004 . Machinability Study on Composite (Polyetheretherketone Reinforced with 30% Glass Fiber-PEEK GF 30) using Polycrystalline Diamond (PCD) and Cemented Carbide (K20) tools . International Journal of Advanced Manufacturing Technology , 23 : 412 – 418 .
   Web of Science ®Google Scholar
• El-Sonbaty , IA , Khashaba , UA , Selmy , AI and Ali , AI . 2008 . Prediction of surface roughness profiles for milled surfaces using an artificial neural network and fractal geometry approach . Journal of Materials Processing Technology , 200 : 271 – 278 .
   Web of Science ®Google Scholar
• Erzurumlu , T and Oktem , H . 2007 . Comparison of response surface model with neural network in determining the surface quality of moulded parts . Materials & Design , 28 : 459 – 465 .
   Web of Science ®Google Scholar
• Ezugwua , EO , Fadera , DA , Bonneya , J , Da silvaa , RB and Salesa , WF . 2005 . Modeling the Correlation between Cutting and Process Parameters in High Speed Machining of Inconel 718 Alloy Using An Artificial Neural Network . International Journal of Machine Tools and Manufacture , 45 : 1375 – 1385 .
   Web of Science ®Google Scholar
• Harsha , AP and Tewari , US . 2003 . Two-Body and Three-Body Abrasive Wear Behaviour of Polyaryletherketone composites . Polymer Testing , 22 : 403 – 408 .
   Web of Science ®Google Scholar
• Hsu , CM . 2001 . Solving multi-response problems through neural networks and principal components analysis . Journal of the Chinese Institute of Industrial Engineers , 18 : 47 – 54 .
   Google Scholar
• Lee , SM , Park , DC , Kim , BC and Lee , DG . 2006 . Strength of Functionally Gradient Composite Hemispherical Bearings . Composite Structures , 73 : 145 – 152 .
   Google Scholar
• Liu , Z . Zhang, D. and Qi, H., “Surface roughness modeling of high speed machining TC4 based on artificial neural network method,” Proceedings of the 1st International Symposium on Systems and Control in Aerospace and Astronautics, 920–924 (2006)
   Google Scholar
• Mata , F , Gaitonde , VN , Karnik , SR and Davim , JP . 2009 . Influence of cutting conditions on machinability aspects of PEEK, PEEK CF 30 and PEEK GF 30 composites using PCD tools . Journal of Materials Processing Technology , 209 : 1980 – 1987 .
   Web of Science ®Google Scholar
• Muthukrishnana , N and Davim , PJ . 2009 . Optimization of machining parameters of Al/SiC-MMC with ANOVA and ANN analysis . Journal of Materials Processing Technology , 209 : 225 – 232 .
   Web of Science ®Google Scholar
• Nalbant , M , Gokkaya , H , Toktas , I and Sur , G . 2009 . The experimental investigation of the effects of uncoated, PVD and CVD-coated cemented carbide inserts and cutting parameters on surface roughness in CNC turning and its prediction using artificial neural networks . Journal of Robotics and Computer-Integrated Manufacturing , 25 : 211 – 223 .
   Web of Science ®Google Scholar
• Park , DC , Lee , SM , Kim , BC , Kim , SH and Lee , DG . 2006 . Development of Heavy Duty Hybrid Carbon-Phenolic Hemispherical Bearings . Composite Structures , 73 : 88 – 98 .
   Web of Science ®Google Scholar
• Quintana , G , Garcia-Romeu , ML and Ciurana , J . 2011 . Surface roughness monitoring application based on artificial neural networks for ball-end milling operations . Journal of Intelligent Manufacturing , 22 : 607 – 617 .
   Web of Science ®Google Scholar
• Sahin , Y and Riza Motorcu , A . 2005 . Surface roughness model for machining mild steel with coated carbide tool . Materials & Design , 26 : 321 – 326 .
   Web of Science ®Google Scholar
• Su , CT , Wong , JT and Tsou , SC . 2005 . A process parameters determination model by \hfill integrating artificial neural network and ant colony optimization . Journal of the Chinese Institute of Industrial Engineers , 22 : 346 – 354 .
   Google Scholar