References

• Chang , H-H . 2006 . Dynamic multi-response experiments by back propagation networks and desirability functions . Journal of the Chinese Institute of Industrial Engineers , 23 ( 4 ) : 280 – 288 .
   Google Scholar
• Ciftci , I , Turker , M and Sekar , U . 2004 . Evaluation of tool wear when machining SiC reinforced Al-2014 alloy matrix composites . Materials and Design , 25 : 251 – 255 .
   Web of Science ®Google Scholar
• Dabade , UA , Sonawane , HA and Joshi , S . 2010 . Cutting forces and surface roughness in machining Al/SICP composites of varying composition . Machining Science and Technology , 14 : 258 – 279 .
   Web of Science ®Google Scholar
• Davim , JP . 2000 . An experimental study of tribological behaviour of the brass/steel pair . Journal of Materials Processing Technology , 100 : 273 – 279 .
   Web of Science ®Google Scholar
• Davim , JP . 2003 . Design optimization of cutting parameters for turning metal matrix composites based on the orthogonal arrays . Journal of Materials Processing Technology , 132 : 340 – 344 .
   Web of Science ®Google Scholar
• Davim , JP . 2003 . Study of drilling metal matrix composites based on the taguchi techniques . Journal of Materials Processing Technology , 132 : 250 – 254 .
   Web of Science ®Google Scholar
• Deonath and Rohatgi , PK . 1981 . Cast aluminium alloy composites containing copper-coated ground mica particles . Journal of Materials Science , 16 : 1599 – 1606 .
   Web of Science ®Google Scholar
• Gallab , M and Sklad , M . 1998 . Machining of Al/SiCp metal matrix composites. Part II: workpiece integrity . Journal of Materials Processing Technology , 83 : 277 – 283 .
   Web of Science ®Google Scholar
• Hsu , C-M . 2001 . Solving multi-response problems through neural networks and principal component analysis . Journal of the Chinese Institute of Industrial Engineers , 18 : 47 – 54 .
   Google Scholar
• Kremer , A , Devillez , S , Dominiak , D , Dudzinski , M and Mansori , EI . 2010 . Machinability of Al/Sic particulate metal-matrix composites under dry conditions with cvd diamond-coated carbide tools . Machining Science and Technology , 12 : 214 – 233 .
   Web of Science ®Google Scholar
• Lin , JT , Bhattacharya , D and Kecman , V . 2003 . Multiple regression and network analysis in composite machining . Composites Science and Technology , 63 ( 3–4 ) : 539 – 548 .
   Web of Science ®Google Scholar
• Lin , J , Bhattacharyya , D and Lane , C . 1995 . Machinability of a silicon carbide reinforced aluminium metal matrix composite . Wear , 181–182 : 883 – 888 .
   Web of Science ®Google Scholar
• Manna , A and Bhattacharya , B . 2003 . A study of machinability of Al-SiC-MMC . Journal of Materials Processing Technology , 140 : 711 – 716 .
   Web of Science ®Google Scholar
• Monaghan , J and O’Reilly , P . 1992 . The drilling of an Al/SiC metal matrix composites . Journal of Materials Processing Technology , 33 : 469 – 480 .
   Web of Science ®Google Scholar
• Morscher , GN , Ojard , G , Miller , R , Gowayed , Y , Santhosh , U and Ahmad , J . 2008 . Tensile creep and fatigue of Sylramic-iBN melt-infiltrated SiC matrix composites: retained properties, damage development, and failure mechanisms . Composites Science and Technology , 68 : 3305 – 3313 .
   Web of Science ®Google Scholar
• Mubaraki , B , Bandyopadhyay , S , Fowle , RF , Mathew , P and Health , PJ . 1995 . Drilling studies of an Al203–Al metal matrix composite. Part I. Drill wears characteristics . Journal of Materials Science , 30 : 6273 – 6280 .
   Web of Science ®Google Scholar
• Naveen Sait , A , Aravindan , S and Noorul Hag , A . 2009 . Optimisation of machining parameters of glass-fibre – reinforced plastic (GFRP) pipes by desirability function analysis using Taguchi technique . International Journal of Advanced Manufacturing Technology , 43 : 581 – 589 .
   Web of Science ®Google Scholar
• Ozben , T , Kilickap , E and Cakir , O . 2008 . Investigation of mechanical and machinability properties of SiC particle reinforced Al-MMC . Journal of Materials Processing Technology , 198 ( 1–3 ) : 220 – 225 .
   Web of Science ®Google Scholar
• Palanikumar , K and Karthikeyan , R . 2007 . Assessment of factors influencing surface roughness on the machining of Al/SiC particulate composites . Materials and Design , 28 : 1584 – 1591 .
   Web of Science ®Google Scholar
• Palanikumar , K , Muthukrishnan , N and Hariprasad , KS . 2008 . Surface roughness parameters optimization in machining A356/sic/20p metal matrix composites by PCD tool using response surface methodology and desirability function . Machining Science and Technology , 12 : 529 – 545 .
   Web of Science ®Google Scholar
• Pendse , DM and Joshi , SS . 2004 . Modeling and optimization of machining process in discontinuously reinforced aluminium matrix composites . Machining Science and Technology , 8 : 85 – 102 .
   Web of Science ®Google Scholar
• Rajmohan , T and Palanikumar , K . 2011 . Experimental investigation and analysis of thrust force in drilling hybrid metal matrix composites by coated carbide drills . Materials and Manufacturing Processes , 26 : 961 – 968 .
   Web of Science ®Google Scholar
• Rajmohan , T and Palanikumar , K . Optimization of machining parameters for surface roughness and burr height in drilling hybrid composites . Materials and Manufacturing Processes , 27 ( 3 ) 320 – 328 . (2012), doi:10.1080/10426914.2011.58549
   Web of Science ®Google Scholar
• Ramulu , M , Rao , PN and Kao , H . 2002 . Drilling of Al203 p /6061 metal matrix composite . Journal of Materials Processing Technology , 124 : 244 – 254 .
   Web of Science ®Google Scholar
• Ross , PJ . 1998 . Taguchi Techniques for Quality Engineering , NY : McGraw-Hill .
   Google Scholar
• Rouby , D and Reynaud , P . 1993 . Fatigue behaviour related to interface modification during load cycling in ceramic-matrix fibre composites . Composites Science and Technology , 48 : 109 – 118 .
   Web of Science ®Google Scholar
• Roy , KR . 1990 . A Primer on Taguchi Method , NY : Van Nostrad Reinhold .
   Google Scholar
• Sahin , Y , Kok , M and Celik , H . 2002 . Tool wear and surface roughness of Al2O3 particle–reinforced aluminium alloy composites . Journal of Materials Processing Technology , 128 : 280 – 291 .
   Web of Science ®Google Scholar
• Seeman , M , Ganesan , G , Karthikeyan , R and Velayudam , A . 2010 . Study on tool wear and surface roughness in machining of particulate aluminium metal matrix composite –response surface methodology approach . International Journal of Advanced Manufacturing Technology , 48 ( 5–8 ) : 613 – 624 .
   Web of Science ®Google Scholar
• Taguchi , G . 1993 . Taguchi on Robust Technology Development Methods , NY : ASME Press .
   Google Scholar
• Taguchi , G . and S. Konishi, Taguchi methods, orthogonal arrays and linear graphs. In: Tools for Quality Engineering, American Supplier Institute (1987)
   Google Scholar
• Tomac , N and Tonnessen , K . 1992 . Machinability of particulate aluminum metal matrix composites . Annals of the CIRP , 41 : 55 – 58 .
   Google Scholar
• Tosun , N . 2006 . Determination of optimum parameters for multi-performance characteristics in drilling using grey relational analysis . International Journal of Advanced Manufacturing Technology , 28 : 450 – 455 .
   Web of Science ®Google Scholar
• Tsai , T-N . 2009 . Modeling and optimization of heat flow thermal profiling operation: A comparative study . Journal of the Chinese Institute of Industrial Engineers , 26 ( 6 ) : 480 – 492 .
   Google Scholar
• Tsao , CC and Hocheng , H . 2004 . Taguchi analysis of delamination associated with various drill bits in drilling of composite material . International Journal of Machine Tools and Manufacture , 44 : 1085 – 1090 .
   Web of Science ®Google Scholar
• Weinert , K . 1993 . A consideration of tool wear mechanism when machining metal matrix composites (MMC) . CIRP Annals , 42 : 95 – 98 .
   Google Scholar
• Yaming , Q and Zehua , Z . 2000 . Tool wear and its mechanism for cutting SiC particle reinforced aluminum matrix composites . Journal of Materials Processing Technology , 100 ( 1–3 ) : 194 – 199 .
   Web of Science ®Google Scholar