1,208
Views
30
CrossRef citations to date
0
Altmetric
Original Articles

Effect of Fiber Volume Fraction on the Flexural Properties of Unidirectional Carbon Fiber/Epoxy Composites

&
Pages 180-189 | Received 24 Oct 2014, Accepted 06 Nov 2014, Published online: 05 Feb 2015

REFERENCES

  • Dzenis, Y. 2008. Structural nanocomposites. Science 25: 419–420.
  • Glaskova, T., and A. Aniskevich. 2009. Moisture absorption by epoxy/montmorillonite nanocomposite. Compos. Sci. Technol. 69: 2711–2715.
  • Chen, J. H., E. Schulz, J. Bohse, and G. Hinrichsen. 1999. Effect of fibre content on the interlaminar fracture toughness of unidirectional glass-fibre/polyamide composite. Composites A 30: 747–755.
  • Hussain, M., A. Nakahira, S. Nishijima, and K. Niihara. 2000. Evaluation of mechanical behavior of CFRC transverse to the fiber direction at room and cryogenic temperature. Composites A 31: 173–179.
  • Abdul Khalil, H. P. S., M. Jawaid, P. Firoozian, E. S. Zainudin, and M. T. Paridah. 2014. Dynamic mechanical properties of activated carbon–filled epoxy nanocomposites. Int. J. Polym. Anal. Charact. 18: 247–256.
  • Paul, S. A., K. Joseph, G. Mathew, L. A. Pothen, and S. Thomas. 2010. Preparation of polypropylene fiber/banana fiber composites by novel commingling method. Polym. Compos. 31: 816–824.
  • Jang, J., and H. Yang. 2000. The effect of surface treatment on the performance improvement of carbon fiber/polybenzoxazine composites. J. Mater. Sci. 35: 2297–2303.
  • Yee, R. Y., and T. S. Stephens. 1996. A TGA technique for determining graphite fiber content in epoxy composites. Thermochim. Acta 272: 191–199.
  • Ozturk, S. 2005. The effect of fibre content on the mechanical properties of hemp and basalt fibre reinforced phenol formaldehyde composites. J. Mater. Sci. 40: 4585–4592.
  • Rath, M., S. Kreuzberger, and G. Hinrichsen. 1998. Manufacture of aramid fibre reinforced nylon-12 by dry powder impregnation process. Composites A 29: 933–938.
  • Choi, Y. K., K. I. Sugimoto, S. M. Song, Y. Gotoh, Y. Ohkoshi, and M. Endo. 2005. Mechanical and physical properties of epoxy composites reinforced by vapor grown carbon nanofibers. Carbon 43: 2199–2208.
  • Zhou, Y. X., F. Pervin, L. Lewis, and S. Jeelani. 2008. Fabrication and characterization of carbon/epoxy composites mixed with multi-walled carbon nanotubes. Mater. Sci. Eng. A 475: 157–165.
  • Zhou, Y. X., F. Pervin, S. Jeelani, and P. K. Mallick. 2008. Improvement in mechanical properties of carbon fabric–epoxy composite using carbon nanofibers. J. Mater. Process. Technol. 198: 445–453.
  • Abot, J. L., Y. Song, M. J. Schul, and V. N. Shanov. 2008. Novel carbon nanotube array-reinforced laminated composite materials with higher interlaminar elastic properties. Compos. Sci. Technol. 68: 2755–2760.
  • Zhang, G., J. Karger-Kocsis, and J. Zou. 2010. Synergetic effect of carbon nanofibers and short carbon fibers on the mechanical and fracture properties of epoxy resin. Carbon 48: 4289–4300.
  • Jacob, M., S. Thomas, and K. T. Varughese. 2004. Mechanical properties of sisal/oil palm hybrid fiber reinforced natural rubber composites. Compos. Sci. Technol. 64: 955–965.
  • Velmurugan, R., and V. Manikandan. 2007. Mechanical properties of palmyra/glass fiber hybrid composites. Composites A 38: 2216–2226.
  • Romanzini, D., A. Lavorotti, H. L. Ornaghi Jr., S. C. Amico, and A. J. Zattera. 2013. Influence of fiber content on the mechanical and dynamic mechanical properties of glass/ramie polymer composites. Mater. Des. 47: 9–15.
  • Joseph, S., M. S. Sreekala, Z. Oommen, P. Koshy, and S. Thomas. 2002. A comparison of the mechanical properties of phenol formaldehyde composites reinforced with banana fibres and glass fibres. Compos. Sci. Technol. 62: 1857–1868.
  • Ahmed, K. S., and S. Vijayarangan. 2008. Tensile, flexural and interlaminar shear properties of woven jute and jute–glass fabric reinforced polyester composites. J. Mater. Process. Technol. 207: 330–335.
  • Shi, Q., L. Wang, H. J. Yu, S. Jiang, Z. Zhao, and X. Dong. 2006. A novel epoxy resin/CaCO3 nanocomposite and its mechanism of toughness improvement. Macromol. Mater. Eng. 291: 53–58.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.