Experimental evaluation and numerical comparisons of pine tree leaves, graphene oxide loaded, and E-glass fiber reinforced sandwich composites

References

• Singha, A. S., and T. Vijay Kumar. 2010. Synthesis, characterization and study of pine needles reinforced polymer matrix based composites. J. Reinf. Plast. Compos. 29:700–709. doi:10.1177/0731684408100354.
   Web of Science ®Google Scholar
• Rinawa, M. L., P. Chauhan, A. K. Sharma, H. Kumar Singh, and M. S. Karuna Ankit. 2022. Water absorption studies of pineapple leaf fiber/nano rice husk powder reinforced epoxy matrix hybrid composites. Mater. Today: Proc. 59:1498–1502. doi:10.1016/j.matpr.2022.01.279.
   Google Scholar
• Jain, J., S. Sinha, and S. Jain. 2021. Compendious characterization of chemically treated natural fiber from pineapple leaves for reinforcement in polymer composites. J. Nat. Fibers 18:845–856. doi:10.1080/15440478.2019.1658256
   Web of Science ®Google Scholar
• Gayathri, N., V. K. Shanmuganathan, A. Joyson, M. Aakash, and A. Godwin Joseph. 2023. Mechanical properties investigation on natural fiber reinforced epoxy polymer composite. Mater. Today: Proc. 72:2574–2580. doi:10.1016/j.matpr.2022.10.121
   Google Scholar
• Irawan, A. P., and I. W. Sukania. 2015. Tensile strength of banana fiber reinforced epoxy composites materials. Appl. Mech. Mater. 776:260–263. doi:10.4028/www.scientific.net/AMM.776.260
   Google Scholar
• Ishidi, C. O. E. 2015. Mechanical properties of coir fiber reinforced epoxy resin composites for helmet shell. Ind. Eng. Lett. 5;67–75.
   Google Scholar
• Kumar, B., S. Roy, D. O. Agumba, D. H. Pham, and J. Kim. 2022. Effect of bio-based derived epoxy resin on interfacial adhesion of cellulose film and applicability towards natural jute fiber-reinforced composites. Int. J. Biol. Macromol. 222:1304–1313. doi:10.1016/j.ijbiomac.2022.09.237
   PubMed Web of Science ®Google Scholar
• Helaili, S., M. Chafra, and Y. Chevalier. 2021. Natural fiber alfa/epoxy randomly reinforced composite mechanical properties identification. Structures 34:542–549. doi:10.1016/j.istruc.2021.07.095.
   Web of Science ®Google Scholar
• Helaili, S., M. Chafra, and Y. Chevalier. 2021. Alfa natural fiber composite reinforcement for concrete beams. Civ. Eng. Architect. 9:1677–1686. doi:10.13189/cea.2021.090602.
   Google Scholar
• Davindrabrabu, M., P. S. Januar, B. Dandi, M. R. Mohd Ruzaimi, and T. Cionita. 2014. Effect of fibre loading on the flexural properties of natural fibre reinforced polymer composites. Appl. Mech. Mater.. 695:85–88. doi:10.4028/www.scientific.net/AMM.695.85
   Google Scholar
• Laraba, S. R., A. Rezzoug, R. Halimi, L. Wei, Y. Yang, S. Abdi, Y. Li, and W. Jie. 2022. Development of sandwich using low-cost natural fibers: Alfa-Epoxy composite core and jute/metallic mesh-Epoxy hybrid skin composite. Ind. Crops Prod. 184:115093. doi:10.1016/j.indcrop.2022.115093
   Web of Science ®Google Scholar
• Deepan, S., R. Jeyakumar, V. Mohankumar, and A. Manojkumar. 2023. Influence of rice husk fillers on mechanical properties of banana/epoxy natural fiber hybrid composites. Mater. Today: Proc. 74:575–580. doi:10.1016/j.matpr.2022.09.459
   Google Scholar
• Sharma, R., D. Kumar Sharma, R. Agarwal, M. Lal Rinawa, R. Subbiah, and P. M. Kumar Ankit. 2022. Investigating the effect of nanoclay content on the mechanical characteristics of natural fiber epoxy composite. Mater. Today: Proc. 66:1319–1323. doi:10.1016/j.matpr.2022.05.139.
   Google Scholar
• Atiqah, A., M. N. M. Ansari, and L. Premkumar. 2020. Impact and hardness properties of honeycomb natural fibre reinforced epoxy composites. Mater. Today: Proc. 29:138–142. doi:10.1016/j.matpr.2020.05.645
   Google Scholar
• Mohan Gift, M. D., K. S. Raghuram, J. N. S. Suryanarayana Raju, D. Ravi, M. Venkata Rao, R. Subbiah, and M. Chandrakasu. « 2022. Study on influence of nano-filler content on the performance of natural fibre reinforced epoxy composites. Mater. Today: Proc. 56:1562–1566. doi:10.1016/j.matpr.2022.01.304
   Google Scholar
• Rana, A. K., S. Guleria, V. K. Gupta, and V. K. Thakur. 2023. Cellulosic pine needles-based biorefinery for a circular bioeconomy. Bioresour. Technol. 367:128255. doi:10.1016/j.biortech.2022.128255
   PubMed Web of Science ®Google Scholar
• Helaili, S., and M. Chafra. 2023. Identification of mechanical properties of a braided alfa stem (stipa tenacissima L.) by an inverse method. J. Compos. Mater. 57:443–450. doi:10.1177/00219983221147685
   Web of Science ®Google Scholar
• Achour, A., F. Ghomari, and N. Belayachi. 2017. Properties of cementitious mortars reinforced with natural fibers. J. Adhes. Sci. Technol. 31:1938–1962. doi:10.1080/01694243.2017.1290572
   Web of Science ®Google Scholar
• Helaili, S., A. Guizani, M. A. Khadimallah, and M. Chafra. 2023. Natural cellulosic alfa fiber (stipa tenacissima L.) improved with Environment-Friendly treatment cementitious composites with a stable flexural strength. Civ. Eng. Architect. 11:1632–1644. doi:10.13189/cea.2023.110341
   Google Scholar
• Helaili, S., T. Rezgui, A. Guizani, and F. Najjar. 2023. Reinforcement of load-bearing structural elements by curved composite plates made from braided natural fibers. In Design and Modeling of Mechanical Systems - V, ed. L. Walha, A. Jarraya, F. Djemal, M. Chouchane, N. Aifaoui, F. Chaari, M. Abdennadher, A. Benamara, M. Haddar, in Lecture Notes in Mechanical Engineering, p. 171–178. Cham: Springer International Publishing. doi:10.1007/978-3-031-14615-2_20.
   Google Scholar
• Helaili, S., A. Guizani, and M. Chafra. 2023. Valorization of the use of natural alfa (stipa tenacissima L.) fiber in composite reinforcing plates based on natural fibers and metal fabric. Innov. Infrastruct. Solut. 8:193. doi:10.1007/s41062-023-01159-w.
   Web of Science ®Google Scholar
• Helaili, S., M. Chafra, and Y. Chevalier. 2016. Hybrid aluminum and natural fiber composite structure for crash safety improvement. In Proceedings of the TMS Middle East—Mediterranean Materials Congress on Energy and Infrastructure Systems (MEMA 2015), ed. I. Karaman, R. Arróyave, et E. Masad, pp. 249–258. Cham: Springer International Publishing. doi:10.1007/978-3-319-48766-3_25.
   Google Scholar
• Helaili, S., S. Bettaieb, and R. Tarhouni. 2023. Tarhouni, road guardrail beam made of natural stem (stipa tenacissima l.) eco-composite: impact energy absorption improvement by stems and pretensioning. J. Compos. Mater. 57:1833–1844. doi:10.1177/00219983231163945
   Web of Science ®Google Scholar
• Helaili, S., W. Mankai, and M. Chafra. 2021. Pressure calculation and fatigue of a trans-tibial prosthetic socket made from natural fiber composite. In Advances in Acoustics and Vibration III, vol. 17, ed. N. Feki, M. S. Abbes, M. Taktak, M. Amine Ben Souf, F. Chaari, M. Haddar, in Applied Condition Monitoring, pp. 199–209. Cham: Springer International Publishing. doi:10.1007/978-3-030-76517-0_22.
   Google Scholar
• Demosthenes, L. C. D C., L. F. C. Nascimento, S. N. Monteiro, U. O. Costa, F. D C. Garcia Filho, F. S. D Luz, M. S. Oliveira, F. J. H. T. V. Ramos, A. C. Pereira, and F. O. Braga. 2020. Thermal and structural characterization of buriti fibers and their relevance in fabric reinforced composites. J. Mater. Res. Technol. 9:115–123. doi:10.1016/j.jmrt.2019.10.036
   Google Scholar
• Sathishkumar, T., S. Satheeshkumar, and J. Naveen. 2014. Glass fiber-reinforced polymer composites – a review. J. Reinf. Plast. Compos. 33:1258–1275. doi:10.1177/0731684414530790
   Web of Science ®Google Scholar
• Erden, S., K. Sever, Y. Seki, and M. Sarikanat. 2010. Enhancement of the mechanical properties of glass/polyester composites via matrix modification glass/polyester composite siloxane matrix modification. Fibers Polym. 11:732–737. doi:10.1007/s12221-010-0732-2
   Web of Science ®Google Scholar
• Patnaik, A., A. Satapathy, and S. Biswas. 2010. Investigations on three-body abrasive wear and mechanical properties of particulate filled glass epoxy composites. Malays. Polym. J. 5:37–48.
   Google Scholar
• Mathew, M. T., N. V. Padaki, L. A. Rocha, J. R. Gomes, R. Alagirusamy, B. L. Deopura, and R. Fangueiro. 2007. Tribological properties of the directionally oriented warp knit GFRP composites. Wear 263:930–938. doi:10.1016/j.wear.2006.12.001
   Web of Science ®Google Scholar
• Alrobei, H. 2021. Mechanical properties of natural screw pine fiber reinforced polyester nanocomposites. J. Mech. Sci. Technol. 35:1969–1975. doi:10.1007/s12206-021-0414-6.
   Web of Science ®Google Scholar
• Ebrahimnezhad-Khaljiri, H., R. Eslami-Farsani, M. Najafi, and A. Saeedi. 2022. Introduction to epoxy/natural fiber composites. In Handbook of Epoxy/Fiber Composites, ed. S. Mavinkere Rangappa, J. Parameswaranpillai, S. Siengchin, S. Thomas. Singapore: Springer. doi:10.1007/978-981-19-3603-6_19
   Google Scholar
• Eslami-Farsani, R., and H. Ebrahimnezhad-Khaljiri. 2021. Smart Epoxy Composites, ed. Jyotishkumar Parameswaranpillai, Harikrishnan Pulikkalparambil, Sanjay M. Rangappa, Suchart Siengchin. Weinheim, Germany: Wiley-VCH. doi:10.1002/9783527824083.ch12.
   Google Scholar
• Nalaeram Sivaram, R., S. Muthu Kumar Thiagamani, P., Sivakumar, M. Srinivasan, S. Narayana Boyina Yagna, H., Ebrahimnezhad-Khaljiri, M. Meena, S. Mavinkere Rangappa, and S. Siengchin. 2023. Isolation and characterization of agro-waste biomass sapodilla seeds as reinforcement in potential polymer composite applications. Heliyon 9:e17760. doi:10.1016/j.heliyon.2023.e17760
   PubMed Web of Science ®Google Scholar
• Fan, Y., Z. Liu, G. Zhao, J. Liu, Y. Liu, and L. Shangguan. 2022. Influence of hydrothermal aging under two typical adhesives on the failure of BFRP single lap joint. Polymers. (Basel) 14:1721. doi:10.3390/polym14091721.
   PubMed Web of Science ®Google Scholar
• Fiore, V., T. Scalici, G. Di Bella, and A. Valenza. 2015. A review on basalt fibre and its composites. Compos. Part B Eng. 74:74–94. doi:10.1016/j.compositesb.2014.12.034
   Web of Science ®Google Scholar
• Marques, E. A. S., R. Campilho, and L. da Silva. 2016. Geometrical study of mixed adhesive joints for high-temperature applications. J. Adhes. Sci. Technol 30:691–707. doi:10.1080/01694243.2015.1121801
   Web of Science ®Google Scholar
• Avendaño, R., R. J. C. Carbas, E. A. S. Marques, L. F. M. Da Silva, and A. A. Fernandes. 2016. Effect of temperature and strain rate on single lap joints with dissimilar lightweight adherends bonded with an acrylic adhesive. Compos. Struct. 152:34–44. doi:10.1016/j.compstruct.2016.05.034
   Web of Science ®Google Scholar
• Chee, S. S., M. Jawaid, M. T. H. Sultan, O. Y. Alothman, and L. Chuah Abdullah. 2020. Effects of nanoclay on physical and dimensional stability of bamboo/kenaf/nanoclay reinforced epoxy hybrid nanocomposites. J. Mater. Res. Technol. 9:5871–5880. doi:10.1016/j.jmrt.2020.03.114
   Google Scholar
• Saba, N., M. Jawaid, O. Y. Alothman, and Z. Almutairi. 2019. Evaluation of dynamic properties of nano oil palm empty fruit bunch filler/epoxy composites. J. Mater. Res. Technol. 8:1470–1475. doi:10.1016/j.jmrt.2018.10.012
   Google Scholar
• Naveen, J., M. Jawaid, E. S. Zainudin, M. T. H. Sultan, and R. Yahaya. 2019. Mechanical and moisture diffusion behaviour of hybrid kevlar/cocos nucifera sheath reinforced epoxy composites. J. Mater. Res. Technol. 8:1308–1318. doi:10.1016/j.jmrt.2018.07.023
   Google Scholar
• Naveen, J., M. Jawaid, E. S. Zainudin, M. T. H. Sultan, and R. Yahaya. 2019. Improved mechanical and moisture-resistant properties of woven hybrid epoxy composites by graphene nanoplatelets (GNP). Materials 12:1249.
   PubMedGoogle Scholar
• Salman, S. D., Leman, Z. Sultan, M. T. H. Ishak, M. R. and Cardona F. 2016. Ballistic impact resistance of plain woven kenaf/aramid reinforced polyvinyl butyral laminated hybrid composite. BioRes. 11:7282–7295.
   Web of Science ®Google Scholar
• Nawras, H. M., Z. N. Ismarrubie, S. M. Sapuan, and M. T. H. Sultan. 2016. Effect of equi-biaxially fabric prestressing on the tensile performance of woven E-glass/polyester reinforced composites. J. Reinf. Plast. Compos. 35:1–11. doi:10.1177/0731684416638553
   Google Scholar
• Paul Christopher, J. E., M. T. Sultan, C. P. Selvan, S. Irulappasamy, F. Mustapha, A. A. Basri, and N. A. S. Syafiqah. 2020. Manufacturing challenges in self-healing technology for polymer composites—a review. J. Mater. Res. Technol. 9:7370–7379. https://doaj.org/article/a81ffd3be04149bcb63080f73bfebd34. doi:10.1016/j.jmrt.2020.04.082
   Google Scholar
• Azammi, A. M. N., S. M. Sapuan, M. R. Ishak, and M. T. H. Sultan. 2020. Physical and damping properties of kenaf fibre filled natural rubber/thermoplastic polyurethane composites. Defence Technol. 16:29–34. doi:10.1016/j.dt.2019.06.004.
   Web of Science ®Google Scholar
• Wan, J., J.-W. Jiang, and H. S. Park. 2017. Negative poisson’s ratio in graphene oxide. Nanoscale 9:4007–4012. doi:10.1039/C6NR08657H.
   PubMed Web of Science ®Google Scholar
• Balaji Ayyanar, C., S. Helaili, S. Mavinkere Rangappa, P. Boonyasopon, and S. Siengchin. 2023. Attempt to identify antimicrobial tridax procumbens (TP) mechanical properties using experimental work coupled with FEM model for biomedical applications. J. Mech. Behav. Biomed. Mater. 146:106086. doi: 10.1016/j.jmbbm.2023.106086.
   PubMed Web of Science ®Google Scholar
• Helaili, S., and M. Chafra. 2014. Anisotropic visco-elastic properties identification of a natural biodegradable ALFA fiber composite. J. Compos. Mater. 48:1645–1658. doi: 10.1177/0021998313488811.
   Web of Science ®Google Scholar
• Helaili, S., S. Bouajila, H. Kaddami, and M. Chafra. 2023. Turbine blade made of natural fiber composite structural and vibrational behavior. In Design and Modeling of Mechanical Systems - V, ed. L. Walha, A. Jarraya, F. Djemal, M. Chouchane, N. Aifaoui, F. Chaari, M. Abdennadher, A. Benamara, M. Haddar, in Lecture Notes in Mechanical Engineering, pp. 743–749. Cham: Springer International Publishing. doi: 10.1007/978-3-031-14615-2_83.
   Google Scholar
• Helaili, S., A. Guizani, F. Najar, and M. Chafra. Novel Rebar Made from Epoxy and Braided Natural Alfa Fibers, in Design and Modeling of Mechanical Systems - V, ed. L. Walha, A. Jarraya, F. Djemal, M. Chouchane, N. Aifaoui, F. Chaari, M. Abdennadher, A. Benamara, M. Haddar, in Lecture Notes in Mechanical Engineering, pp. 188–194. Cham: Springer International Publishing. doi: 10.1007/978-3-031-14615-2_22.
   Google Scholar
• Xu, X., X. Wang, Q. Cai, X. Wang, R. Wei, and S. Du. 2016. Improvement of the compressive strength of carbon fiber/epoxy composites via microwave curing. J. Mater. Sci. Technol. 32:226–232. doi: 10.1016/j.jmst.2015.10.006.
   Web of Science ®Google Scholar
• Kulkarni, S. V., J. S. Rice, and B. W. Rosen. 1975. An investigation of the compressive strength of kevlar 49/epoxy composites. Composites 6:217–225. doi:10.1016/0010-4361(75)90417-6.
   Google Scholar