References
- Curcio F, DeAngelis BA. Dilatant behavior of superplasticized cement pastes containing metakaolin. Cem Concr Res. 1998;28(5):629–634. https://doi.org/10.1016/S0008-8846(98)00046-5. doi: 10.1016/S0008-8846(98)00046-5
- Mikanovic N, Jolicoeur C. Influence of superplasticizers on the rheology and stability of limestone and cement pastes. Cem Concr Res. 2008;38(7):907–919. doi: 10.1016/j.cemconres.2008.01.015
- Kwan AKH, Fung WWS, Chen JJ. Effects of superplasticiser on rheology and cohesiveness of CSF cement paste. Adv Cem Res. 2012;24(3):125–137. https://doi.org/10.1680/adcr.10.00020.
- The Self Compacting Concrete European Project Group. The European guidelines for self-compacting concrete. The UK; 2005.
- Amziane S, Ferraris CF, Koehler EP. Measurement of workability of fresh concrete using a mixing truck. J Res Natl Inst Stand Technol. 2005;110(1):55. https://doi.org/10.6028/jres.110.006.
- Roussel N. A thixotropy model for fresh fluid concretes: theory, validation and applications. Cem Concr Res. 2006;36(10):1797–1806. https://doi.org/10.1016/j.cemconres.2006.05.025.
- Williams DA, Saak AW, Jennings HM. The influence of mixing on the rheology of fresh cement paste. Cem Concr Res. 1999;29(9):1491–1496. https://doi.org/10.1016/S0008-8846(99)00124-6.
- Feys D, Verhoeven R, De Schutter G. Fresh self compacting concrete, a shear thickening material. Cem Concr Res. 2008;38(7):920–929. https://doi.org/10.1016/j.cemconres.2008.02.008.
- Feys D, Verhoeven R, De Schutter G. Extension of the Poiseuille formula for shear-thickening materials and application to self-compacting concrete. Appl Rheol. 2008;18(6):62705.
- Feys D, Verhoeven R, De Schutter G. Why is fresh self-compacting concrete shear thickening? Cem Concr Res. 2009;39(6):510–523. https://doi.org/10.1016/j.cemconres.2009.03.004.
- Felekoğlu B. Rheological behaviour of self-compacting microconcrete. Sadhana. 2014;39(6):1471–1495. DOI:10.1007/s12046-014-0281-2.
- Atzeni C, Massidda L, Sanna U. Comparison between rheological models for portland cement pastes. Cem Concr Res. 1985;15(3):511–519. https://doi.org/10.1016/0008-8846(85)90125-5.
- Wallevik OH, Feys D, Wallevik JE, et al. Avoiding inaccurate interpretations of rheological measurements for cement-based materials. Cem Concr Res. 2015;78:100–109. https://doi.org/10.1016/j.cemconres.2015.05.003.
- Barnes HA. Shear-thickening (“Dilatancy”) in suspensions of nonaggregating solid particles dispersed in Newtonian liquids. J Rheol. 1989;33(2):329–366. DOI:10.1122/1.550017.
- Cyr M, Legrand C, Mouret M. Study of the shear thickening effect of superplasticizers on the rheological behaviour of cement pastes containing or not mineral additives. Cem Concr Res. 2000;30(9):1477–1483. DOI:10.1016/S0008-8846(00)00330-6.
- Yahia A. Shear-thickening behavior of high-performance cement grouts—influencing mix-design parameters. Cem Concr Res. 2011;41(3):230–235. https://doi.org/10.1016/j.cemconres.2010.11.004.
- Wong HHC, Kwan AKH. Packing density of cementitious materials: part 1—measurement using a wet packing method. Mater Struct. 2008;41(4):689–701. DOI:10.1617/s11527-007-9274-5.
- AS 3972. Australian standard – general purpose and blended cements. Sydney: Standards Australia; 2010.
- Li LG, Kwan AKH. Effects of superplasticizer type on packing density, water film thickness and flowability of cementitious paste. Constr Build Mater. 2015;86:113–119. DOI:10.1016/j.conbuildmat.2015.03.104.
- Güneyisi E, Gesoglu M, Naji N, et al. Evaluation of the rheological behavior of fresh self-compacting rubberized concrete by using the Herschel–Bulkley and modified Bingham models. Archi Civ Mech Eng. 2016;16(1):9–19. DOI:10.1016/j.acme.2015.09.003.
- Güneyisi E, Gesoglu M, Algın Z, et al. Rheological and fresh properties of self-compacting concretes containing coarse and fine recycled concrete aggregates. Constr Build Mater. 2016;113:622–630. https://doi.org/10.1016/j.conbuildmat.2016.03.073.
- Rubio-Hernández FJ, Velázquez-Navarro JF, Ordóñez-Belloc LM. Rheology of concrete: a study case based upon the use of the concrete equivalent mortar. Mater Struct. 2013;46(4):587–605. https://doi.org/10.1617/s11527-012-9915-1.
- Krieger IM, Elrod H. Direct determination of the flow curves of non-Newtonian fluids. II. Shearing rate in the concentric cylinder viscometer. J Appl Phys. 1953;24(2):134–136. DOI:10.1063/1.1721226.
- Krieger IM. Shear rate in the Couette viscometer. Trans Soc Rheol. 1968;12(1):5–11. DOI:10.1122/1.549097.
- Yahia A. Effect of solid concentration and shear rate on shear-thickening response of high-performance cement suspensions. Constr Build Mater. 2014;53:517–521. DOI:10.1016/j.conbuildmat.2013.10.078.
- Iveson SM. Granule coalescence modelling: including the effects of bond strengthening and distributed impact separation forces. Chem Eng Sci. 2001;56(6):2215–2220. DOI:10.1016/S0009-2509(00)00506-6.
- Kwan AKH, Wong HHC. Packing density of cementitious materials: part 2—packing and flow of OPC+ PFA+ CSF. Mater Struct. 2008;41(4):773–784. DOI:10.1617/s11527-007-9281-6.
- BS EN 1097-3. Tests for mechanical and physical properties of aggregates. Determination of loose bulk density and voids. Brussel: BSI Standards Publication; 1998.
- Kwan AKH, Fung WWS. Packing density measurement and modelling of fine aggregate and mortar. Cem Concr Compos. 2009;31(6):349–357. https://doi.org/10.1016/j.cemconcomp.2009.03.006.
- Kwan AKH, Fung WWS. Roles of water film thickness and SP dosage in rheology and cohesiveness of mortar. Cem Concr Compos. 2012;34(2):121–130. DOI:10.1016/j.cemconcomp.2011.09.016.
- Wong HHC, Kwan AKH. Packing density of cementitious materials: measurement modelling. Mag Concr Res. 2008;60(3):165–175. https://doi.org/10.1680/macr.2007.00004.
- Fung WWS, Kwan AKH, Wong HHC. Wet packing of crushed rock fine aggregate. Mater Struct. 2009;42(5):631–643. DOI:10.1617/s11527-008-9409-3.
- Fung WWS, Kwan AKH. Role of water film thickness in rheology of CSF mortar. Cem Concr Compos. 2010;32(4):255–264. https://doi.org/10.1016/j.cemconcomp.2010.01.005.
- Li LG, Kwan AKH. Packing density of concrete mix under dry and wet conditions. Powder Technol. 2014;253:514–521. DOI:10.1016/j.powtec.2013.12.020.