References
- Bažant ZP, Gattu M, Vorel J. 2012. Work conjugacy error in commercial finite-element codes: its magnitude and how to compensate for it. Proc R Soc A.
- Boehler JP. 1987. Introduction to the invariant formulation of anisotropic constitutive equations. In: Boehler JP, editor. Applications of tensor functions in solid mechanics. No. 292 in International Centre for Mechanical Sciences Vienna: Springer; p. 13–30.
- Carew TE, Vaishnav RN, Patel DJ. 1968. Compressibility of the arterial wall. Circ Res. 23(1):61–68. doi:10.1161/01.RES.23.1.61.
- Chuong CJ, Fung YC. 1984. Compressibility and constitutive equation of arterial wall in radial compression experiments. J Biomech. 17(1):35–40. doi:10.1016/0021-9290(84)90077-0.
- Crisfield MA. 1996. Non-linear finite element analysis of solids and structures. Vol. 2. Chichester; New York: Wiley.
- Destrade M, Gilchrist M, Motherway J, Murphy J. 2012. Slight compressibility and sensitivity to changes in poisson's ratio. Int J Num Methods Eng. 90(4):403–411. Available from: http://www.onlinelibrary.wiley.com/doi/10.1002/nme.3326/abstract10.1002/nme.3326.
- Diehl P, Steinhauser E, Gollwitzer H, Heister C, Schauwecker J, Milz S, Mittelmeier W, Schmitt M. 2006. Biomechanical and immunohistochemical analysis of high hydrostatic pressure-treated achilles tendons. J Orthop Sci. 11(4):380–385. Available from: http://www.link.springer.com/article/10.1007/s00776-006-1031-z10.1007/s00776-006-1031-z.
- Flory PJ. 1961. Thermodynamic relations for high elastic materials. Trans Faraday Soc. 57:829–838. doi:10.1039/tf9615700829.
- Fung YC. 1993. Biomechanics – mechanical properties of living tissues. New York, NY: Springer. Available from: http://www.link.springer.com/10.1007/978-1-4757-2257-4.
- Gasser TC, Ogden RW, Holzapfel GA. 2006. Hyperelastic modelling of arterial layers with distributed collagen fibre orientations. J R Soc Interface. 3(6):15–35. doi:10.1098/rsif.2005.0073.
- Gilchrist M, Murphy J, Parnell W, Pierrat B. 2014. Modelling the slight compressibility of anisotropic soft tissue. Int J Solids Struct. 51(23–24):3857–3865.
- Helfenstein J, Jabareen M, Mazza E, Govindjee S. 2010. On non-physical response in models for fiber-reinforced hyperelastic materials. Int J Solids Struct. 47(16):2056–2061. Available from: http://www.sciencedirect.com/science/article/pii/S002076831000128910.1016/j.ijsolstr.2010.04.005.
- Holzapfel GA. 2000. Nonlinear solid mechanics. Vol. 24. Chichester. Available from: http://www.tocs.ulb.tu-darmstadt.de/182986683.pdf Wiley.
- Holzapfel GA, Gasser TC, Ogden RW. 2000. A new constitutive framework for arterial wall mechanics and a comparative study of material models. J Elasticity. 61(1/3):1–48. doi:10.1023/A:1010835316564.
- Horgan C, Murphy J. 2009. Constitutive modeling for moderate deformations of slightly compressible rubber. J Rheol. 53(1):153–168. doi:10.1122/1.3037263.
- Horgan CO, Murphy JG. 2014. Reverse poynting effects in the torsion of soft biomaterials. J Elasticity. :1–14. Available from: http://www.link.springer.com/article/10.1007/s10659-014-9482-5.
- Humphrey JD, Strumpf RK, Yin FCP. 1990. Determination of a constitutive relation for passive myocardium: II. – parameter estimation. J Biomech Eng. 112(3):339. doi:10.1115/1.2891194.
- Maas SA, Ellis BJ, Ateshian GA, Weiss JA. 2012. FEBio: finite elements for biomechanics. J Biomech Eng. 134(1), 011005. PMID: 22482660 PMCID: PMC3705975.10.1115/1.4005694.
- Meng Q, Jin Z, Fisher J, Wilcox R. 2013. Comparison between FEBio and abaqus for biphasic contact problems. Proce Inst Mechan Eng H J Eng Med. 227(9):1009–1019. Available from: http://www.pih.sagepub.com/content/227/9/1009https://doi.org/10.1177/0954411913483537.
- Morrow DA, Haut Donahue TL, Odegard GM, Kaufman KR. 2010. Transversely isotropic tensile material properties of skeletal muscle tissue. J Mech Behav Biomed Mater. 3(1):124–129. Available from: http://www.sciencedirect.com/science/article/pii/S1751616109000472https://doi.org/10.1016/j.jmbbm.2009.03.004.
- Murphy JG. 2013. Transversely isotropic biological, soft tissue must be modelled using both anisotropic invariants. Eur J Mech A Solids. 42:90–96. Available from: http://www.sciencedirect.com/science/article/pii/S0997753813000466https://doi.org/10.1016/j.euromechsol.2013.04.003.
- Ní Annaidh A, Destrade M, Gilchrist MD, Murphy JG. 2013. Deficiencies in numerical models of anisotropic nonlinearly elastic materials. Biomech Model Mechanobiol. 12(4):781–791. Available from: http://www.link.springer.com/article/10.1007/s10237-012-0442-3https://doi.org/10.1007/s10237-012-0442-3.
- Ogden RW. 1978. Nearly isochoric elastic deformations: application to rubberlike solids. J Mech Phys Solids. 26(1):37–57. Available from: http://www.sciencedirect.com/science/article/pii/0022509678900121https://doi.org/10.1016/0022-5096(78)90012-1.
- Sansour C. 2008. On the physical assumptions underlying the volumetric-isochoric split and the case of anisotropy. Eur J Mech A Solids. 27(1):28–39. doi:10.1016/j.euromechsol.2007.04.001.
- Simo JC, Taylor RL, Pister KS. 1985. Variational and projection methods for the volume constraint in finite deformation elasto-plasticity. Comput Methods Appl Mech Eng. 51(1–3):177–208. doi:10.1016/0045-7825(85)90033-7.
- Simulia. 2013. ABAQUS 6.12 user documentation. Providence, RI, USA: Dassault Systems.
- Spencer AJM. 1971. Theory of invariants. Continuum Phys. 1:239–353.
- Spencer AJM, ed. 1985. Continuum theory of the mechanics of fibre-reinforced composites. 1984th ed. Wien; New York: Springer.
- Takaza M, Moerman KM, Gindre J, Lyons G, Simms CK. 2013. The anisotropic mechanical behaviour of passive skeletal muscle tissue subjected to large tensile strain. J Mech Behav Biomed Mater. 17:209–220, Available from: http://www.sciencedirect.com/science/article/pii/S1751616112002457https://doi.org/10.1016/j.jmbbm.2012.09.001.
- Vergori L, Destrade M, McGarry P, Ogden RW. 2013. On anisotropic elasticity and questions concerning its finite element implementation. Comput Mech. 52(5):1185–1197. Available from: http://www.link.springer.com/article/10.1007/s00466-013-0871-6https://doi.org/10.1007/s00466-013-0871-6.
- Vito R, Dixon S. 2003. Blood vessel constitutive models – 1995–2002. Annu Rev Biomed Eng. 5(1):413–439. doi:10.1146/annurev.bioeng.5.011303.120719.
- Weiss JA, Maker BN, Govindjee S. 1996. Finite element implementation of incompressible, transversely isotropic hyperelasticity. Comput Methods Appl Mech Eng. 135(1–2):107–128. Available from: http://www.sciencedirect.com/science/article/pii/0045782596010353.
- Weiss JA, Gardiner JC, Bonifasi-Lista C. 2002. Ligament material behavior is nonlinear, viscoelastic and rate-independent under shear loading. J Biomech. 35(7):943–950. Available from: http://www.sciencedirect.com/science/article/pii/S002192900200041610.1016/S0021-9290(02)00041-6.