Stress evaluation of different implant lengths on atrophic edentulous mandibles with fixed full-arch implant-supported prosthesis: a finite element analysis

References

• Akca K, Iplikcioglu H. 2002. Finite element stress analysis of the effect of short implant usage in place of cantilever extensions in mandibular posterior edentulism. J Oral Rehabil. 29(4):350–356.
   PubMed Web of Science ®Google Scholar
• Albrektsson T, Zarb G, Worthington P, Eriksson AR. 1986. The long-term efficacy of currently used dental implants: a review and proposed criteria of success. Int J Oral Maxillofac Implants. 1(1):11–25.
   PubMedGoogle Scholar
• Allen C, Meyer CA, Yoo E, Vargas JA, Liu Y, Jalali P. 2018. Stress distribution in a tooth treated through minimally invasive access compared to one treated through traditional access: a finite element analysis study. J Conserv Dent. 21(5):505–509.
   PubMedGoogle Scholar
• Ausiello P, Ciaramella S, Martorelli M, Lanzotti A, Gloria A, Watts DC. 2017. CAD-FE modeling and analysis of class II restorations incorporating resin-composite, glass ionomer and glass ceramic materials. Dental Mater. 33(12):1456–1465.
   PubMed Web of Science ®Google Scholar
• Barao VA, Assuncao WG, Tabata LF, de Sousa EA, Rocha EP. 2008. Effect of different mucosa thickness and resiliency on stress distribution of implant-retained overdentures-2D FEA. Comput Methods Prog Biomed. 92(2):213–223.
   PubMed Web of Science ®Google Scholar
• Barao VA, Assuncao WG, Tabata LF, Delben JA, Gomes EA, de Sousa EA, Rocha EP. 2009. Finite element analysis to compare complete denture and implant-retained overdentures with different attachment systems. J Craniofac Surg. 20(4):1066–1071.
   PubMed Web of Science ®Google Scholar
• Barao VA, Delben JA, Lima J, Cabral T, Assuncao WG. 2013. Comparison of different designs of implant-retained overdentures and fixed full-arch implant-supported prosthesis on stress distribution in edentulous mandible-a computed tomography-based three-dimensional finite element analysis. J Biomech. 46(7):1312–1320.
   PubMed Web of Science ®Google Scholar
• Blanes RJ. 2009. To what extent does the crown-implant ratio affect the survival and complications of implant-supported reconstructions? A systematic review. Clin Oral Implants Res. 20:67–72.
   PubMed Web of Science ®Google Scholar
• Bonnet AS, Postaire M, Lipinski P. 2009. Biomechanical study of mandible bone supporting a four-implant retained bridge: finite element analysis of the influence of bone anisotropy and foodstuff position. Med Eng Phys. 31(7):806–815.
   PubMed Web of Science ®Google Scholar
• Borchers L, Reichart P. 1983. Three-dimensional stress distribution around a dental implant at different stages of interface development. J Dent Res. 62(2):155–159.
   PubMed Web of Science ®Google Scholar
• Chapman RJ. 1989. Principles of occlusion for implant prostheses: guidelines for position, timing, and force of occlusal contacts. Quintessence Int. 20(7):473–480.
   PubMedGoogle Scholar
• Cheng R, Zhou XD, Liu Z, Hu T. 2007. Development of a finite element analysis model with curved canal and stress analysis. J Endod. 33(6):727–731.
   PubMed Web of Science ®Google Scholar
• Cooper LF. 2012. Factors influencing primary dental implant stability remain unclear. J Evid Based Dent Pract. 12(3 Suppl):185–186.
   PubMedGoogle Scholar
• Cruz M, Wassall T, Toledo EM, da Silva Barra LP, Cruz S. 2009. Finite element stress analysis of dental prostheses supported by straight and angled implants. Int J Oral Maxillofac Implants. 24(3):391–403.
   PubMed Web of Science ®Google Scholar
• Daas M, Dubois G, Bonnet AS, Lipinski P, Rignon-Bret C. 2008. A complete finite element model of a mandibular implant-retained overdenture with two implants: comparison between rigid and resilient attachment configurations. Med Eng Phys. 30(2):218–225.
   PubMed Web of Science ®Google Scholar
• Ding X, Zhu XH, Liao SH, Zhang XH, Chen H. 2009. Implant-bone interface stress distribution in immediately loaded implants of different diameters: a three-dimensional finite element analysis. J Prosthodont. 18(5):393–402.
   PubMedGoogle Scholar
• Eazhil R, Swaminathan SV, Gunaseelan M, Kannan GV, Alagesan C. 2016. Impact of implant diameter and length on stress distribution in osseointegrated implants: a 3D FEA study. J Int Soc Prev Community Dent. 6(6):590–596.
   PubMed Web of Science ®Google Scholar
• Faverani LP, Barao VA, Ramalho-Ferreira G, Delben JA, Ferreira MB, Garcia Junior IR, Assuncao WG. 2014. The influence of bone quality on the biomechanical behavior of full-arch implant-supported fixed prostheses. Mater Sci Eng C Mater Biol Appl. 37:164–170.
   PubMed Web of Science ®Google Scholar
• Fernandez JR, Gallas M, Burguera M, Viano JM. 2003. A three-dimensional numerical simulation of mandible fracture reduction with screwed miniplates. J Biomech. 36(3):329–337.
   PubMed Web of Science ®Google Scholar
• Geng JP, Tan KB, Liu GR. 2001. Application of finite element analysis in implant dentistry: a review of the literature. J Prosthet Dent. 85(6):585–598.
   PubMed Web of Science ®Google Scholar
• Kantardžić I, Vasiljević D, Lužanin O, Maravić T, Blažić L. 2018. Influence of the restorative procedure factors on stress values in premolar with MOD cavity: a finite element study. Med Biol Eng Comput. 56(10):1875–1886.
   PubMed Web of Science ®Google Scholar
• Keltjens HM, Kayser AF, Hertel R, Battistuzzi PG. 1993. Distal extension removable partial dentures supported by implants and residual teeth: considerations and case reports. Int J Oral Maxillofac Implants. 8(2):208–213.
   PubMedGoogle Scholar
• Kong YS, Park JW, Choi DJ. 2016. FEA model analysis of the effects of the stress distribution of saddle-type implants on the alveolar bone and the structural/physical stability of implants. Maxillofac Plast Reconstr Surg. 38(1):9.
   PubMedGoogle Scholar
• Korioth TW, Johann AR. 1999. Influence of mandibular superstructure shape on implant stresses during simulated posterior biting. J Prosthet Dent. 82(1):67–72.
   PubMed Web of Science ®Google Scholar
• Lovald ST, Wagner JD, Baack B. 2009. Biomechanical optimization of bone plates used in rigid fixation of mandibular fractures. J Oral Maxillofac Surg. 67(5):973–985.
   PubMed Web of Science ®Google Scholar
• Lum LB. 1991. A biomechanical rationale for the use of short implants. J Oral Implantol. 17(2):126–131.
   PubMedGoogle Scholar
• Mangano F, Frezzato I, Frezzato A, Veronesi G, Mortellaro C, Mangano C. 2016. The effect of crown-to-implant ratio on the clinical performance of extra-short locking-taper implants. J Craniofac Surg. 27(3):675–681.
   PubMed Web of Science ®Google Scholar
• McAlarney ME, Stavropoulos DN. 2000. Theoretical cantilever lengths versus clinical variables in fifty-five clinical cases. J Prosthet Dent. 83(3):332–343.
   PubMed Web of Science ®Google Scholar
• Mollersten L, Lockowandt P, Linden LA. 1997. Comparison of strength and failure mode of seven implant systems: an in vitro test. J Prosthet Dent. 78(6):582–591.
   PubMed Web of Science ®Google Scholar
• Murphy WM, Williams KR, Gregory MC. 1995. Stress in bone adjacent to dental implants. J Oral Rehabil. 22(12):897–903.
   PubMed Web of Science ®Google Scholar
• O'Mahony AM, Williams JL, Spencer P. 2001. Anisotropic elasticity of cortical and cancellous bone in the posterior mandible increases peri-implant stress and strain under oblique loading. Clin Oral Implants Res. 12(6):648–657.
   PubMed Web of Science ®Google Scholar
• Papavasiliou G, Kamposiora P, Bayne SC, Felton DA. 1996. Three-dimensional finite element analysis of stress-distribution around single tooth implants as a function of bony support, prosthesis type, and loading during function. J Prosthet Dent. 76(6):633–640.
   PubMed Web of Science ®Google Scholar
• Papavasiliou G, Kamposiora P, Bayne SC, Felton DA. 1997. 3D-FEA of osseointegration percentages and patterns on implant-bone interfacial stresses. J Dent. 25(6):485–491.
   PubMed Web of Science ®Google Scholar
• Pierrisnard L, Renouard F, Renault P, Barquins M. 2003. Influence of implant length and bicortical anchorage on implant stress distribution. Clin Implant Dent Relat Res. 5(4):254–262.
   PubMedGoogle Scholar
• Reilly DT, Burstein AH. 1975. The elastic and ultimate properties of compact bone tissue. J Biomech. 8(6):393–405.
   PubMed Web of Science ®Google Scholar
• Rieger MR, Mayberry M, Brose MO. 1990. Finite element analysis of six endosseous implants. J Prosthet Dent. 63(6):671–676.
   PubMed Web of Science ®Google Scholar
• Santos AFV, Tanaka CB, Lima RG, Espósito COM, Ballester RY, Braga RR, Meira JBC. 2009. Vertical root fracture in upper premolars with endodontic posts: finite element analysis. J Endod. 35(1):117–120.
   PubMed Web of Science ®Google Scholar
• Schwartz-Dabney CL, Dechow PC. 2003. Variations in cortical material properties throughout the human dentate mandible. Am J Phys Anthropol. 120(3):252–277.
   PubMed Web of Science ®Google Scholar
• Segundo RM, Oshima HM, Silva IN, Junior LH, Mota EG, Coelho LF. 2007. Stress distribution on external hexagon implant system using 3D finite element analysis. Acta Odontol Latinoam. 20(2):79–81.
   PubMedGoogle Scholar
• Sevimay M, Turhan F, Kilicarslan MA, Eskitascioglu G. 2005. Three-dimensional finite element analysis of the effect of different bone quality on stress distribution in an implant-supported crown. J Prosthet Dent. 93(3):227–234.
   PubMed Web of Science ®Google Scholar
• Sugiura T, Yamamoto K, Murakami K, Kawakami M, Kang YB, Tsutsumi S, Kirita T. 2009. Biomechanical analysis of miniplate osteosynthesis for fractures of the atrophic mandible. J Oral Maxillofac Surg. 67(11):2397–2403.
   PubMed Web of Science ®Google Scholar
• Takahashi T, Shimamura I, Sakurai K. 2010. Influence of number and inclination angle of implants on stress distribution in mandibular cortical bone with all-on-4 concept. J Prosthodont Res. 54(4):179–184.
   PubMed Web of Science ®Google Scholar
• Tanino F, Hayakawa I, Hirano S, Minakuchi S. 2007. Finite element analysis of stress-breaking attachments on maxillary implant-retained overdentures. Int J Prosthodont. 20(2):193–198.
   PubMed Web of Science ®Google Scholar
• Tawil G, Aboujaoude N, Younan R. 2006. Influence of prosthetic parameters on the survival and complication rates of short implants. Int J Oral Maxillofac Implants. 21(2):275–282.
   PubMed Web of Science ®Google Scholar
• Teixeira MF, Ramalho SA, de Mattias Sartori IA, Lehmann RB. 2010. Finite element analysis of 2 immediate loading systems in edentulous mandible: rigid and semirigid splinting of implants. Implant Dent. 19(1):39–49.
   PubMed Web of Science ®Google Scholar
• Telleman G, Raghoebar GM, Vissink A, den Hartog L, Huddleston Slater JJ, Meijer HJ. 2011. A systematic review of the prognosis of short (<10 mm) dental implants placed in the partially edentulous patient. J Clin Periodontol. 38(7):667–676.
   PubMed Web of Science ®Google Scholar
• Vajgel A, Camargo IB, Willmersdorf RB, de Melo TM, Laureano Filho JR, Vasconcellos RJ. 2013. Comparative finite element analysis of the biomechanical stability of 2.0 fixation plates in atrophic mandibular fractures. J Oral Maxillofac Surg. 71(2):335–342.
   PubMed Web of Science ®Google Scholar
• Vilela ABF, Soares PBF, de Oliveira FS, Garcia-Silva TC, Estrela C, Versluis A, Soares CJ. 2019. Dental trauma on primary teeth at different root resorption stages-A dynamic finite element impact analysis of the effect on the permanent tooth germ. Dent Traumatol. 35(2):101–108.
   PubMed Web of Science ®Google Scholar
• Weinberg LA. 1993. The biomechanics of force distribution in implant-supported prostheses. Int J Oral Maxillofac Implants. 8(1):19–31.
   PubMedGoogle Scholar
• Weinberg LA, Kruger B. 1995. A comparison of implant/prosthesis loading with four clinical variables. Int J Prosthodont. 8(5):421–433.
   PubMedGoogle Scholar
• Wu JL, Liu YF, Peng W, Dong HY, Zhang JX. 2018. A biomechanical case study on the optimal orthodontic force on the maxillary canine tooth based on finite element analysis. J Zhejiang Univ Sci. B. 19(7):535–546.
   PubMed Web of Science ®Google Scholar
• Wu J, Liu Y, Wang D, Zhang J, Dong X, Jiang X, Xu X. 2019. Investigation of effective intrusion and extrusion force for maxillary canine using finite element analysis. Comput Methods Biomech Biomed Eng. 22(16):1294–1302.
   PubMed Web of Science ®Google Scholar
• Xing Z, Chen LS, Peng W, Chen LJ. 2007. Development of a finite element analysis model with curved canal and stress analysis. J Endodontics. 33(6):727–731.
   PubMed Web of Science ®Google Scholar
• Zarb GA, Schmitt A. 1990. The longitudinal clinical effectiveness of osseointegrated dental implants: the Toronto Study. Part II: the prosthetic results. J Prosthet Dent. 64(1):53–61.
   PubMed Web of Science ®Google Scholar
• Zarone F, Apicella A, Nicolais L, Aversa R, Sorrentino R. 2003. Mandibular flexure and stress build-up in mandibular full-arch fixed prostheses supported by osseointegrated implants. Clin Oral Implants Res. 14(1):103–114.
   PubMed Web of Science ®Google Scholar