Longitudinally centered embossed structure in the locking compression plate for biodegradable bone implant plate: a finite element analysis

References

• Abd Aziz AU, Abdul Wahab AH, Abdul Rahim RA, Abdul Kadir MR, Ramlee MH. 2020. A finite element study: finding the best configuration between unilateral, hybrid, and ilizarov in terms of biomechanical point of view. Injury. 51 (11):2474–2478.
   PubMed Web of Science ®Google Scholar
• Arnone JC, Sherif El-Gizawy A, Crist BD, Della Rocca GJ, Ward CV. 2013. Computer-Aided engineering approach for parametric investigation of locked plating systems design. J Med Dev Trans ASME. 7 (2):021001.
   Web of Science ®Google Scholar
• ASTM F382-17, Standard Specification and Test Method for Metallic Bone Plates. n.d. ASTM F382-17, standard specification and test method for metallic bone plates. ASTM International; West Conshohocken; PA; 2017. www.astm.org.
   Google Scholar
• Bel JC. 2019. Pitfalls and limits of locking plates. Orthop Traumatol Surg Res. 105 (1S):S103–S9.
   PubMedGoogle Scholar
• Bui HP, Tomar S, Courtecuisse H, Cotin S, Bordas SPA. 2018. Real-Time error control for surgical simulation. IEEE Trans Biomed Eng. 65 (3):596–607.
   PubMed Web of Science ®Google Scholar
• Burkhart TA, Andrews DM, Dunning CE. 2013. Finite element modeling mesh quality, energy balance and validation methods: a review with recommendations associated with the modeling of bone tissue. J Biomech. 46 (9):1477–1488.
   PubMed Web of Science ®Google Scholar
• Chandra G, Pandey A. 2020b. Biodegradable bone implants in orthopedic applications: a review. Biocybernetics Biomed Eng. 40 (2):596–610.
   Web of Science ®Google Scholar
• Chandra G, Pandey A. 2020a. Preparation strategies for Mg-alloys for biodegradable orthopaedic implants and other biomedical applications: a review. Irbm.
   Google Scholar
• Chandra G, Pandey A. 2021a. Design and analysis of biodegradable buttress threaded screws for fracture fixation in orthopedics: a finite element analysis. Biomed Phys Eng Exp. 7 (4):45010. https://doi.org/https://doi.org/10.1088/2057-1976/ac00d1.
   Web of Science ®Google Scholar
• Chandra G, Pandey A. 2021b. Design approaches and challenges for biodegradable bone implants: a review. Expert Rev Med Devices. 18 (7):629–648. https://doi.org/https://doi.org/10.1080/17434440.2021.1935875.
   PubMed Web of Science ®Google Scholar
• Chandra G, Pandey A, Pandey S. 2020. Design of a biodegradable plate for femoral shaft fracture fixation. Med Eng Phys. 81:86–96.
   PubMed Web of Science ®Google Scholar
• Chen J, Tan L, Yang K. 2017. Effect of heat treatment on mechanical and biodegradable properties of an extruded ZK60 Alloy. Bioact Mater. 2 (1):19–26.
   PubMed Web of Science ®Google Scholar
• Chen J, Tan L, Yu X, Etim IP, Ibrahim M, Yang K. 2018. Mechanical properties of magnesium alloys for medical application: a review. J Mech Behav Biomed Mater. 87:68–79.
   PubMed Web of Science ®Google Scholar
• Duprez M, Bordas SPA, Bucki M, Bui HP, Chouly F, Lleras V, Lobos C, Lozinski A, Rohan P-Y, Tomar S. 2020. Quantifying discretization errors for soft tissue simulation in computer assisted surgery: a preliminary study. Appl Math Modell. 77:709–723.
   Web of Science ®Google Scholar
• Fan J, Qiu X, Niu X, Tian Z, Sun W, Liu X, Li Y, Li W, Meng J. 2013. Microstructure, mechanical properties, in vitro degradation and cytotoxicity evaluations of Mg-1.5Y-1.2Zn-0.44Zr Alloys for biodegradable metallic implants. Mater Sci Eng C Mater Biol Appl. 33 (4):2345–2352.
   PubMed Web of Science ®Google Scholar
• Fouda N, Mostafa R, Saker A. 2019. Numerical study of stress shielding reduction at fractured bone using metallic and composite bone-plate models. Ain Shams Eng J. 10 (3):481–488.
   Web of Science ®Google Scholar
• Ganadhiepan G, Miramini S, Patel M, Mendis P, Zhang L. 2019. Bone fracture healing under ilizarov fixator: influence of fixator configuration, fracture geometry, and loading. Int J Numer Method Biomed Eng. 35 (6):e3199–18.
   PubMed Web of Science ®Google Scholar
• Ghimire S, Miramini S, Richardson M, Mendis P, Zhang L. 2019. Effects of dynamic loading on fracture healing under different locking compression plate configurations: a finite element study. J Mech Behav Biomed Mater. 94:74–85.
   PubMed Web of Science ®Google Scholar
• Gómez FS, Lorza RL, Bobadilla MC, García RE. 2017. Improving the process of adjusting the parameters of finite element models of healthy human intervertebral discs by the multi-response surface method. Materials. 10 (10):1–39.
   Web of Science ®Google Scholar
• Gueorguiev B, Lenz M. 2018. Why and how do locking plates fail? Injury. 49:S56–S60. (18)30305-X.
   PubMed Web of Science ®Google Scholar
• Gui Z, Kang Z, Li Y. 2019. Corrosion mechanism of the as-cast and as-extruded biodegradable Mg-3.0Gd-2.7Zn-0.4Zr-0.1Mn alloys. Mater Sci Eng C Mater Biol Appl. 96:831–840.
   PubMed Web of Science ®Google Scholar
• Hou L, Li Z, Zhao H, Pan Y, Pavlinich S, Liu X, Li X, Zheng Y, Li L. 2016. Microstructure, mechanical properties, corrosion behavior and biocompatibility of as-extruded biodegradable Mg–3Sn–1Zn–0.5Mn Alloy. J Mater Sci Technol. 32 (9):874–882.
   Web of Science ®Google Scholar
• Im SH, Jung Y, Kim SH. 2017. Current status and future direction of biodegradable metallic and polymeric vascular scaffolds for next-generation stents. Acta Biomater. 60:3–22.
   PubMed Web of Science ®Google Scholar
• Íñiguez-Macedo S, Lostado-Lorza R, Escribano-García R, Martínez-Calvo M. á. 2019. Finite element model updating combined with multi-response optimization for hyper-elastic materials characterization. Materials. 12 (7).
   PubMed Web of Science ®Google Scholar
• Kang Y, Du B, Li Y, Wang B, Sheng L, Shao L, Zheng Y, Xi T. 2019. Optimizing mechanical property and cytocompatibility of the biodegradable Mg-Zn-Y-Nd Alloy by hot extrusion and heat treatment. J Mater Sci Technol. 35 (1):6–18.
   Web of Science ®Google Scholar
• Kaur M, Singh K. 2019. Review on titanium and titanium based alloys as biomaterials for orthopaedic applications. Mater Sci Eng C Mater Biol Appl. 102:844–862.
   PubMed Web of Science ®Google Scholar
• Koo Y, Jang Y, Yun Y. 2017. A study of long-term static load on degradation and mechanical integrity of Mg alloys-based biodegradable metals. Mater Sci Eng B Solid State Mater Adv Technol. 219:45–54.
   PubMed Web of Science ®Google Scholar
• Kumar K, Gill RS, Batra U. 2018. Challenges and opportunities for biodegradable magnesium alloy implants. Mater Technol. 33 (2):153–172.
   Web of Science ®Google Scholar
• Lacroix D, Prendergast PJ. 2002. A Mechano-regulation model for tissue differentiation during fracture healing: analysis of gap size and loading. J Biomech. 35 (9):1163–1171. (02)00086-6.
   PubMed Web of Science ®Google Scholar
• Lee Y, Ogihara N, Lee T. 2019. Assessment of finite element models for prediction of osteoporotic fracture. J Mech Behav Biomed Mater. 97:312–320.
   PubMed Web of Science ®Google Scholar
• Li Z, Chen M, Li W, Zheng H, You C, Liu D, Jin F. 2017. The synergistic effect of trace Sr and Zr on the microstructure and properties of a biodegradable Mg-Zn-Zr-Sr Alloy. J Alloys Compd. 702:290–302.
   Web of Science ®Google Scholar
• Lin C-H, Chao C-K, Ho Y-J, Lin J. 2018. Modification of the screw hole structures to improve the fatigue strength of locking plates. Clin Biomech (Bristol, Avon). 54:71–77.
   PubMed Web of Science ®Google Scholar
• Liu C, Ren Z, Xu Y, Pang S, Zhao X, Zhao Y. 2018. Biodegradable Magnesium alloys developed as bone repair materials: a review. Scanning. 2018:9216314–9216315.
   PubMedGoogle Scholar
• Li H, Zheng Y, Qin L. 2014. Progress of biodegradable metals. Progress Nat Sci Mater Int. 24 (5):414–422.
   Web of Science ®Google Scholar
• Le Gallo Lucas VPC, Lima Lucas Persohn Sylvain Nérot Agathe S, Laurie S, Wafa L, Gallo VPCL, Lucas Persohn Sylvain N. Agathe 2021. Engineering biomechanical comparative evaluation of percutaneous fixations with vertebral expansion for vertebral compression fractures: an experimental and finite element study. Comput Methods Biomech Biomed Eng. 1–12. https://doi.org/https://doi.org/10.1080/10255842.2021.1959919.
   Google Scholar
• Mehta CH, Narayan R, Nayak UY. 2019. Computational modeling for formulation design. Drug Discov Today. 24 (3):781–788.
   PubMed Web of Science ®Google Scholar
• Meischel M, Hörmann D, Draxler J, Tschegg EK, Eichler J, Prohaska T, Stanzl-Tschegg SE. 2017. Bone-Implant degradation and mechanical response of bone surrounding mg-alloy implants. J Mech Behav Biomed Mater. 71:307–313.
   PubMed Web of Science ®Google Scholar
• Miramini S, Zhang L, Richardson M, Mendis P, Ebeling PR. 2016. Influence of fracture geometry on bone healing under locking plate fixations: a comparison between oblique and transverse tibial fractures. Med Eng Phys. 38 (10):1100–1108.
   PubMed Web of Science ®Google Scholar
• Pick JW, Stack JK, Anson BJ. 1941. Measurements on the human femur I. lengths, diamters and angles. Q Bull N.U.M.S. 15 (4):281–290.
   Google Scholar
• Radha R, Sreekanth D. 2017. Insight of magnesium alloys and composites for orthopedic implant applications – a review. J Magnesium Alloys. 5 (3):286–312.
   Web of Science ®Google Scholar
• Riaz U, Shabib I, Haider W. 2019. The current trends of mg alloys in biomedical applications-a review. J Biomed Mater Res B Appl Biomater. 107 (6):1970–1996.
   PubMed Web of Science ®Google Scholar
• Ruggiero A, D’Amato R, Affatato S. 2019. Comparison of meshing strategies in THR finite element modelling. Materials. 12 (14):1–11.
   Web of Science ®Google Scholar
• Sanchez AH, Martinez BJC, Luthringer F, Feyerabend R. Willumeit 2015. Mg and Mg alloys: how comparable are in vitro and in vivo corrosion rates? A review. Acta Biomater. 13 (3):16–31.
   PubMedGoogle Scholar
• Shirurkar A, Tamboli A, Jagtap PN, Dondapati S, Davidson JD. 2017. Mechanical behavior of ZM21 magnesium alloy locking plates - an experimental and finite element study. Mater Today: Proc. 4 (6):6728–6736.
   Google Scholar
• Shuai C, Li S, Peng S, Feng P, Lai Y, Gao C. 2019. Biodegradable metallic bone implants. Mater Chem Front. 3 (4):544–562.
   Web of Science ®Google Scholar
• Somovilla-Gómez F, Lostado-Lorza R, Corral-Bobadilla M, Escribano-García R. 2020. Improvement in determining the risk of damage to the human lumbar functional spinal unit considering age, height, weight and sex using a combination of FEM and RSM. Biomech Model Mechanobiol. 19 (1):351–387.
   PubMed Web of Science ®Google Scholar
• Steiner M, Claes L, Ignatius A, Simon U, Wehner T. 2014. Disadvantages of Interfragmentary Shear on Fracture healing-mechanical insights through numerical simulation. J Orthop Res. 32 (7):865–872.
   PubMed Web of Science ®Google Scholar
• Subasi O, Oral A, Lazoglu I. 2019. A novel adjustable locking plate (ALP) for segmental bone fracture treatment. Injury. 50 (10):1612–1619.
   PubMed Web of Science ®Google Scholar
• Thapa N, Prayson M, Goswami T. 2015. A failure study of a locking compression plate implant. Case Stud Eng Fail Anal. 3:68–72.
   Google Scholar
• Wu Y, Wang YM, Zhao DW, Zhang N, Li H, Li J, Wang Y, Zhao Y, Yan J, Zhou Y. 2019. In Vivo study of microarc oxidation coated mg alloy as a substitute for bone defect repairing: degradation behavior, mechanical properties, and bone response. Colloids Surf B Biointerfaces. 181 (6):349–359.
   PubMedGoogle Scholar
• Yan Y, Cao H, Kang Y, Yu K, Xiao T, Luo J, Deng Y, Fang H, Xiong H, Dai Y. 2017. Effects of Zn concentration and heat treatment on the microstructure, mechanical properties and corrosion behavior of as-extruded Mg-Zn alloys produced by powder metallurgy. J Alloys Compd. 693:1277–1289.
   Web of Science ®Google Scholar
• Yao H, Wen J, Xiong Y, Lu Y, Ren F, Cao W. 2018. Extrusion temperature impacts on biometallic Mg-2.0Zn-0.5Zr-3.0Gd (Wt%) solid-solution alloy. J Alloys Compd. 739:468–480.
   Web of Science ®Google Scholar
• Zheng YF, Gu XN, Witte F. 2014. Biodegradable metals. Mater Sci Eng R. 77:1–34. https://doi.org/https://doi.org/10.1007/978-1-4614-3942-4_5.
   Web of Science ®Google Scholar