References
- AASHTO, 2002. Guide for design of pavement structures, American Association of State Highway and Transportation Officials, USA
- AS 1289.3.2.1, 1995. Methods of testing soils for engineering purposes, Method 3.2.1: Soil classification tests – Determination of the plastic limit of a soil. Standards Australia
- AS 1289.3.3.1, 1995. Methods of testing soils for engineering purposes, Method 3.3.1: Soil classification tests – Determination of the plasticity index of a soil. Standards Australia
- AS 1289.3.4.1, 1995. Methods of testing soils for engineering purposes, Method 3.4.1: Soil classification tests – Determination of the linear shrinkage of a soil. Standards Australia
- AS 1289.3.9.1, 2002. Methods of testing soils for engineering purposes, Method 3.9.1: Soil classification tests – Determination of the cone liquid limit of a soil. Standards Australia
- ASTM C 295, 2003. Standard guide for petrographic examination of aggregates for concrete
- ASTM D 698, 1991. Standard test methods for laboratory compaction characteristics of soil using standard effort (12 400 ft lbf/ft3 (600 kN m/m3))
- AUSTROADS, 2004. Guide to the structural design of road pavements, AUSTROADS, Sydney, Australia
- AUSTSTAB . 2003 . Determination of the resilient modulus and fatigue properties of stabilised materials–indirect tensile method , Sydney, Australia : Australian Stabilisation Industry Association (AUSTSTAB) .
- BSI . 1993 . Method for the determination of the indirect tensile stiffness modulus of bituminous materials: DD 213 , London : British Standards Institution .
- Foley, G. and Australian Stabilisation Expert Group, 2001a. Contract report – Effect of design, construction and environmental factors for long-term performance of stabilised materials. AUSTROADS. RC91022-1, November
- Foley, G. and Australian Stabilisation Expert Group, 2001b. Contract report – Mechanistic design issues for stabilised pavement materials. AUSTROADS. Rc91022-3, November
- Khattak , M.J. and Alrashidi , M. 2006 . Durability and mechanistic characteristics of fiber reinforced soil–cement mixtures . The International Journal of Pavement Engineering , 7 ( 1 ) : 53 – 62 .
- Liebenberg , J. and Visser , A. 2003 . Stabilization and structural design of marginal materials for use in low-volume roads . Transportation Research Record , 1819 ( 1 ) : 166 – 172 .
- Neville , A.M. 1995 . “ Properties of concrete ” . In Fourth and final edition , England : Longman Group Limited .
- Nunes , M.C.M. , Bridges , M.G. and Dawson , A.R. 1996 . Assessment of secondary materials for pavement construction: technical and environmental aspects . Waste Management , 16 ( 1–3 ) : 87 – 96 .
- Nunes, M.C.M., 1997. Enabling the use of alternative materials in road construction. Thesis (PhD). Department of Civil Engineering, University of Nottingham, University Park, Nottingham NG7 2RD, UK
- Oliver , J.W.H. The use of gyratory compaction for asphalt mix design in Australia . Proceedings 21st ARRB and 11th REAAA Conference, Cairns, Australia. ARRB Transport Research, 18–23 May
- Timoshenko , S.P. and Goodier , J.N. 1970 . Theory of elasticity , Third edition , 97 – 165 . New York : McGraw-Hill Book Company .
- Wardle, L.J., 1997. Program CIRCLY user's manual. CSIRO Australia Division of Applied Geomechanics Computer Program, number 2
- White , G.W. and Gnanendran , C.T. 2005 . The influence of compaction method and density on the strength and modulus of cementitiously stabilised pavement materials . The International Journal of Pavement Engineering , 6 ( 2 ) : 97 – 110 .
- Yeo, R., Vuong, B., and Alderson, A., 2002. Contract report-towards national test methods for stiffness and fatigue characterisation of stabilised materials. ARRB Transport Research, RC2028-002, 23 July