Comparison of measured vs. predicted performance of jointed plain concrete pavements using the Mechanistic–Empirical Pavement Design Guideline

References

• ARA, Inc. 2004 . Guide for mechanistic–empirical design of new and rehabilitated pavement structure , National Cooperative Highway Research Program, Transportation Research Board, National Research Council, Washington, DC
   Google Scholar
• Barenberg, E.J., et al., 2005. Review comments on the 2002 MEDG for new concrete pavements prepared for NCHRP 1-40A (02)
   Google Scholar
• Beckemeyer , C. , Khazanovich , L. and Yu , T. 2002 . Determining amount of built-in curling in jointed plain concrete pavement: Case study of Pennsylvania I-80 . Transportation Research Record: Journal of the Transportation Research Board , 1809 : 85 – 92 .
   Google Scholar
• Burnham , T.R. and Pirkl , W.M. 1997 . Application of empirical and mechanistic empirical pavement design procedures to Mn/ROAD concrete pavement test sections , Technical Report for Minnesota Department of Transportation, Report No. MN/RC-97/14
   Google Scholar
• Byrum , C. 2000 . Analysis by high-speed profile of jointed concrete pavement slab curvatures . Transportation Research Record: Journal of the Transportation Research Board , 1730 : 1 – 9 .
   Google Scholar
• Coree , B. 2005 . Implementing the mechanistic–empirical pavement design guide: Technical Report Iowa State University. Report prepared for the Iowa Highway Research Board (IHRB) Project TR-509
   Google Scholar
• Gotlif , A. , Mallela , J. and Khazanovich , L. 2006 . Finite element study of partial-depth cracks in restrained PCC slabs . International Journal for Pavement Engineering , 7 ( 4 ) : 323 – 329 .
   Google Scholar
• Gutierrez , J.J. 2008 . Evaluating the JPCP cracking model of the mechanistic–empirical pavement design guide Thesis for the Degree Master of Science in Civil Engineering. University of Pittsburgh
   Google Scholar
• Hall , K.D. and Beam , S. 2004 . Estimating the sensitivity of design input variables for rigid pavement analysis with a mechanistic–empirical design guide . Transportation Research Record: Journal of the Transportation Research Board , 1919 : 65 – 73 .
   Google Scholar
• Janssen , D.J. and Snyder , M.B. 2000 . Temperature-moment concept for evaluating pavement temperature data . Journal of Infrastructure Systems. American Society of Civil Engineers , 6 ( 2 ) Technical Note No. 19948
   Google Scholar
• Kannekanti , V. and Harvey , J. 2005 . Sensitivity analysis of 2002 design guide rigid pavement distress prediction models , Davis, CA : University of California . Report prepared for the California Department of Transportation
   Google Scholar
• Khazanovich , L. and Yu , T. 2005 . “ Accounting for concrete shrinkage in the mechanistic–empirical pavement design procedure ” . In Creep, shrinkage and durability of concrete structures , Edited by: Pijaudier-Cabot , Gilles , Gerard , Bruno and Acker , Paul . 287 – 292 . Ecole Centrale de Nantes, France : Hermes Science Publishing, Ltd .
   Google Scholar
• Khazanovich , L. 2001 . Development of rapid solutions for prediction of critical CRCP stresses . Transportation Research Record: Journal of the Transportation Research Board , 1778 : 64 – 72 .
   Google Scholar
• Khazanovich , L. 2008 . Adaption of MEPDG for design of Minnesota low-volume Portland cement concrete pavements . Transportation Research Record: Journal of the Transportation Research Board , 2087 : 57 – 67 .
   Google Scholar
• Mu, F., et al., 2010. Prepare and execute a sensitivity analysis to evaluate the MEDPG rigid pavement performance prediction models – task 4 & 5 draft report, FHWA-Project Number DTFH61-05-P-00094
   Google Scholar
• Packard , R.G. and Tayabji , S.D. 1985 . “ New PCA thickness design procedure for concrete highway and street pavements ” . In Proceedings of 3rd International Conference on Concrete Pavement Design and Rehabilitation Purdue University
   Google Scholar
• Rao , S. and Roesler , J.R. 2005 . Characterizing effective built in curling from concrete pavement field measurements . Journal of Transportation Engineering , 131 ( 4 ) : 320 – 327 . American Society of Civil Engineering
   Web of Science ®Google Scholar
• Vandenbossche , J.M. 2003 . Interpreting falling weight deflectometer results for curled and warped Portland cement concrete pavements Thesis for the Degree Doctor of Philosophy in Civil Engineering. University of Minnesota
   Google Scholar
• Vandenbossche , J. and Mu , F. 2009 . Evaluating the built-in temperature difference in the JPCP cracking model of the M-EPDG . International Journal of Pavement Engineering , (under review)
   Google Scholar
• Vandenbossche , J.M. 2008 . Sensitivity analysis of various design parameters for JPCPs and CRCPs , Technical Report for Federal Highway Administration
   Google Scholar
• Well , S.A. , Phillips , B.M. and Vandenbossche , J.M. 2006 . Quantifying built-in construction gradients and early-age slab shape to environmental loads for jointed plain concrete pavements . International Journal for Pavement Engineers , 7 ( 4 ) : 275 – 289 .
   Google Scholar
• Yu , T. 1998 . Analysis of concrete pavement responses to temperature and wheel loads measured from instrumented slabs . Transportation Research Record: Journal of the Transportation Research Board , 1639 : 94 – 101 .
   Google Scholar