An analytical procedure for strain response prediction of flexible pavement

References

• Baker, H.B., Buth, M.R., and Van Deusen, D.A., 1994. Minnesota road research project: load response instrumentation installation and testing procedures, Final Report, 1992-94, Report No. MN/PR-94/01, Minnesota Department of Transportation, Maplewood, MN
   Google Scholar
• Bao, W., 2000. Calibration of flexible pavement structural model using MnRoad field data. MS Thesis, Department of Civil Engineering, University of Minnesota, Minneapolis, MN
   Google Scholar
• Carpenter, S.H., 2008. Extended life hot-mix asphalt pavement (ELHMAP) test sections at ATREL. Research Report FHWA-ICT-08-017, Illinois Center for Transportation, University of Illinois, Urbana-Champaign, IL
   Google Scholar
• Chatti, K., et al., 1996. Field investigation into effects of vehicle speed and tire pressure on asphalt concrete pavement strains. Transportation Research Record No. 1539, Washington, D.C
   Google Scholar
• Colombo , D. , Giglio , M. and Manes , A. 2007 . 3D fatigue crack propagation analysis of a helicopter component . International Journal of Materials and Product Technology , 30 : 107 – 123 .
   Web of Science ®Google Scholar
• Cormier , N.G. 1999 . Aggressive submodelling of stress concentrations . International Journal for Numerical Methods in Engineering , 46 : 889 – 909 .
   Web of Science ®Google Scholar
• De Beer , M. 1996 . Measurement of tyre/pavement interface stresses under moving wheel loads . International Journal of Vehicle Design , : 1 – 40 .
   Google Scholar
• De Jong , D.L. , Peatz , M.G.F. and Korswagen , A.R. 1973 . Computer program bisar layered system under normal and tangential loads , Amsterdam : Konin Klijke Shell-Laboratorium .
   Google Scholar
• Elseifi , M.A. 2006 . Viscoelastic modeling and field validation of flexible pavements . Journal of Engineering Mechanics , 132 : 172 – 178 .
   Web of Science ®Google Scholar
• Fagan , M.J. 1992 . Finite element analysis: theory and practice , New York : Wiley .
   Google Scholar
• Fanous , F. , Coree , B. and Wood , D. 1999 . Response of iowa pavements to heavy agricultural loads , Ames, IA : Department of Civil and Construction Engineering, Iowa State University .
   Google Scholar
• Huang , Y. 1993 . Pavement analysis and design , Englewood Cliffs, NJ : Prentice Hall .
   Google Scholar
• Loulizi, A., et al., 2001. Data collection and management of the instrumented smart road flexible pavement sections. Transportation Research Record No. 1769, 142–151, Washington, DC
   Google Scholar
• Loulizi, A. and Al-Qadi, I.L., 2004. Inability of the elastic-layered theory to predict pavement vertical stresses. Proceedings of second international conference on accelerated pavement testing, Minneapolis, MN
   Google Scholar
• Loulizi , A. , Al-Qadi , I.L. and Elseifi , M. 2006 . Difference between in situ flexible pavement measured and calculated stresses and strains . ASCE Journal of Transportation Engineering , 132 : 574 – 579 .
   Web of Science ®Google Scholar
• Moreno, A.M., 2000. Load equivalency factors from the structural response of flexible pavements. MS Thesis, Department of Civil Engineering, University of Minnesota, MN
   Google Scholar
• Sargand, S.M., Green, R., and Khoury, I., 1997. Instrumentation ohio test pavement. Transportation Research Record No. 1596, Washington, DC
   Google Scholar
• Sebaaly, P.E. and Mamlouk, M., 1987. Prediction of pavement response to actual traffic loading. Transportation Research Board, Washington, DC
   Google Scholar
• Schapery , R. and Park , S. 1999 . Methods of interconversion between linear viscoelastic material functions, Part II – An approximate analytical method . International Journal of Solids and Structures , 36 : 1677 – 1699 .
   Web of Science ®Google Scholar
• Siddharthan , R.V. 2002 . Investigation of tire contact stress distributions on pavement response . Journal of Transportation Engineering , 128 : 136 – 144 .
   Web of Science ®Google Scholar
• Solaimanian, M., Hunter, D., and Stoffels, S.M., 2006. Design and construction report for superpave in-situ stress–strain instrumentation sites. State Route 1001, Blair County, PA. Final Report, Pennsylvania Transportation Institute, University Park, PA
   Google Scholar
• Stoffels, S.M., Solaimanian, M., and Yin, H., 2009. Superpave in-situ stress–strain investigation – Phase II Final Report. Vol. IV: Mechanistic analysis and implementation, Pennsylvania Transportation Institute, University Park, PA
   Google Scholar
• Timm, D.H., Priest, A.L., and McEwen, T.V., 2004. Design and instrumentation of the structural pavement experiment at the NCAT test track. NCAT Report 04-01, National Center for Asphalt Technology, Auburn University, Auburn, AL
   Google Scholar
• Timm, D.H., 2009. I-35 Pavement instrumentation final report - FHWA-OK-09-04 National Center for Asphalt Technology. Auburn University, Auburn, AL
   Google Scholar
• Wang, J., 2001. Three-dimensional finite element analysis of flexible pavements. MS Thesis, Department of Civil Engineering, University of Maine, Orono, ME
   Google Scholar
• Whitcomb , J.D. and Woo , K. 1993 . Application of iterative global/local finite element analysis, Part 1: linear analysis . Communications in Numerical Methods in Engineering , 9 : 745 – 756 .
   Web of Science ®Google Scholar
• Wu, Z. and Hossain, M., 2003. Pilot instrumentation of a superpave test section at the kansas accelerated testing laboratory. Final Report, Report No. KTRAN: KSU-98-2, Department of Civil Engineering, Kansas State University, Manhattan, KS
   Google Scholar
• Yin, H., 2007. Integrating instrumentation data in probabilistic performance prediction of flexible pavements. Ph.D. dissertation. The Pennsylvania State University, University Park, PA
   Google Scholar
• Yin , H. 2007 . The effect of loading time on flexible pavement dynamic response: a finite element analysis . Mechanics of Time-Dependent Materials , 11 : 265 – 288 .
   Web of Science ®Google Scholar
• Yin , H. , Stoffels , S. and Solaimanian , M. 2008 . Optimization of asphalt pavement modeling based on the global-local 3D FEM approach . International Journal of Road Materials and Pavements Design , 9 : 345 – 355 .
   Web of Science ®Google Scholar