REFERENCES
- Agostinacchio, M. and Cuomo, G., 2004. Asphalt concrete pavement reinforcement through the addition of micro-fibers and steel meshes. In: 4th international SIIV congress, Palermo, Italy: University of Palermo, 1–12.
- ASTM C 1018, 1990. Standard test method for flexural toughness and first crack strength of fiber reinforced concrete. Philadelphia, PA: ASTM, 637–644.
- Bahia, H.U., et al., 2001. Characterization of modified asphalt binders in superpave mix design. NCHRP 459.Washington, DC: TRB, National Research Council.
- Bolzan, P.E. and Huber, G., 1993. Direct tension test experiments. SHRP-A-641.Washington, DC: Strategic Highway Research Program, National Research Council.
- Brule, B., 1996. Polymer modified asphalt cements used in the road construction industry: basic principles. Transportation Research Record, 1535. Washington, DC: TRB, National Research Council48–53.
- Bueno, B.S., et al., 2003. Engineering properties of fiber reinforced cold asphalt mixes. Technical note.Journal of Environmental Engineering, 129 (10), 952–955.
- Elseifi, M.A., 1999. Viscoelasticmodeling of straight and modified binders at intermediate and high temperatures. Master's thesis. Virginia Tech, Blacksburg, VA, USA.
- Lange-Kornbak, D. and Karihaloo, B.L., 1997. Tension softening of fibre-reinforced cementitious composites. Journal of Cement and Concrete Composites, 19, 315–328.
- Lee, S.J., et al., 2005. Fatigue cracking resistance of fiber reinforced asphalt concrete. Textile Research Journal, 75 (2), 123–128.
- Li, V.C., Wang, Y., and Backer, S., 1991. A micromechanical model of tension-softening and bridging toughening of short random fiber reinforced brittle matrix composites. Journal of Mechanics and Physics of Solids, 39 (5), 607–625.
- Petersen, J.C., et al., 1994. Binder characterization and evaluation. Vol. 1. SHRP-A-367. Washington, DC: Strategic Highway Research Program, National Research Council.
- Petersson, P.E., 1981. Direct tensile tests on prismatic concrete specimens. Journal of Cement and Concrete Research, 11, 51–56.
- Roque, R. and Buttlar, W.G., 1992. Development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile test. Journal of the Association of Asphalt Paving Technologists, 61, 304–332.
- Trottier, J.F. and Banthia, N., 1994. Toughness characterization of fiber reinforced concrete. Journal of Materials in Civil Engineering, 6 (2), 264–289.
- Vural, B. and Colak, H., 2011. Laboratory comparison of the crumb-rubber and SBS modified bitumen and hot mix asphalt. Journal of Construction and Building Materials, 25, 3204–3212.
- Wang, Y., Li, V.C., and Backer, S., 1988. Modeling of fibre pull-out from a cement matrix. Journal of Cement Composites and Lightweight Concrete, 10 (3), 143–149.
- Wu, S.P., et al., 2009. Influence of aging on the evolution of structure, morphology and rheology of base and SBS modified bitumen. Journal of Construction and Building Materials, 23, 1005–1010.
- Yoo, P.J., Ohm, B.S., and Choi, J.Y., 2012. Toughening characteristics of plastic fiber-reinforced hot-mix asphalt mixtures. KSCE Journal of Civil Engineering, 16 (5), 751–758.
- Zahran, S.Z. and Fatani, M.N., 1999. Glass fiber reinforced asphalt paving mixture: feasibility assessment. Journal of King Absulaziz University, 11 (1), 85–98.