New achievements in visco-elastoplastic constitutive model and temperature sensitivity of glasphalt

References

• AASHTO (American Association of State Highway and Transportation Officials), 1993. Guide for design of pavement structures. New York: AASHTO.
   Google Scholar
• Al Hakim, B., Cheung, L.W., and Armitage, R.J., 2000. Use of FWD data for prediction of bonding between pavement layers. International Journal of Pavement Engineering, 1, 49–59.
   Google Scholar
• Arabani, M., 2011. Effect of glass cullet on the improvement of the dynamic behavior of asphalt concrete. Construction and Building Materials, 25, 1181–1185.
   Web of Science ®Google Scholar
• Arabani, M., 2006. Increment of fatigue resistance of HMA by waste tire thread. In: 7th International congress on civil engineering. Tehran, Iran.
   Google Scholar
• Arabani, M. and Mirabdolazimi, S.M., 2009. Evaluation of the effect of the use of waste glass cullet in increasing the lifetime of HMA. In: Proceedings of the 8th International congress on civil engineering. Iran: Shiraz University.
   Google Scholar
• ASTM, 2000. Road and paving materials. West Conshohocken, PA: Annual book of ASTM standards. Vol. 04.03.
   Google Scholar
• Buttlar, W.G. and Roque, R., 1996. Evaluation of empirical and theoretical models to determine asphalt mixtures stiffness at low temperature. AAPT, 65, 99–141.
   Google Scholar
• Darabi, M.K., 2012. A modified viscoplastic model to predict the permanent deformation of asphaltic materials under cyclic-compression loading at high temperatures. International Journal of Plasticity, 35, 100–134.
   Web of Science ®Google Scholar
• Huang, Y., 2002. Pavement analysis and design. Englewood Cliffs, NJ: Prentice Hall.
   Google Scholar
• Gabrielson, J.R., 1992. Evaluation of hot mix asphalt (HMA) under static creep and repeated load tests. Dissertation (PhD). Auburn University.
   Google Scholar
• Gonzalez, J.M., 2007. A viscoplastic constitutive model with strain rate variables for asphalt mixtures – numerical simulation. Computational Material Science, 38 (4), 543–560.
   Web of Science ®Google Scholar
• Kandhal, P.S., 1992. Waste materials in hot mix asphalt – an overview. National Center for Asphalt Technology. NCAT Report 92-06.
   Google Scholar
• Li, G., 1999. Elastic modulus prediction of asphalt concrete. Journal Materials in Civil Engineering, 11, 236–241.
   Web of Science ®Google Scholar
• Little, D.N. and Epps, J.A., 2001. Hydrated lime – More than just a filler. Arlington, VA: National Lime Association.
   Google Scholar
• Little, D.N., Epps, J.A., and Sebaaly, P.E., 2006. The benefits of hydrated lime in Hot Mix Asphalt. Arlington, VA: National Lime Association.
   Google Scholar
• Lu, Y. and Wright, P.J., 1998. Numerical approach of visco-elastoplastic analysis for asphalt mixtures. Computer and Structure, 69 (2), 139–147.
   Web of Science ®Google Scholar
• MaupinJr, G.W., 1998. Effect of glass concentration on stripping of glasphalt. Virginia Transportation Research Council, Report No.: VTRC- 98-R30.
   Google Scholar
• Meyers, M.A. and Chawla, K.K., 1999. Mechanical behavior of materials. The Netherlands: Balkema.
   Google Scholar
• Picado Santos, L., Capitao, S.D., and Pais, J.C., 2003. Stiffness modulus and phase angle prediction models for high modulus asphalt concrete. International Journal of Pavements, 2 (3), 37–49.
   Google Scholar
• Sides, J., Uzan, M., and Perl, 1985. A comprehensive visco-elastoplastic characterization of sand–asphalt compressive and tensile cyclic loading. Journal of Testing Evaluation, 13 (1), 49–59.
   Web of Science ®Google Scholar
• Szydlo, A. and Mackiewicz, P., 2005. Asphalt mixes deformation sensitivity to change in rheological parameters. Journal of Materials in Civil Engineering, 17 (1), 1–9.
   Web of Science ®Google Scholar
• Wu, S., Yang, W., and Xue, Y., 2004. Preparation and properties of glass–asphalt concrete. Wuham, China: Key Laboratory for Silicate Materials Science and Engineering of Ministry of Education, Wuham University of Technology.
   Google Scholar
• Ye, Y., Yang, X., and Chen, C., 2009. Experimental researches on visco-elastoplastic constitutive model of asphalt mastic. Construction and Building Materials, 23, 3161–3165.
   Web of Science ®Google Scholar
• Zhu, H. and Nodes, J., 2000. Contact based analysis of asphalt pavement with the effect of aggregate angularity. Mechanics of Materials, 32, 193–202.
   Web of Science ®Google Scholar
• Zhu, H. and Sun, L., 2013. A viscoelastic–viscoplastic damage constitutive model for asphalt mixtures based on thermodynamics. International Journal of Plasticity, 40, 81–100.
   Web of Science ®Google Scholar