References
- ASTM Designation D7460-10, 2010. Test method for determining fatigue failure of compacted asphalt concrete subjected to repeated flexural bending. West Conshohocken, PA: ASTM International. https://doi.org/doi:10.1520/D7460-10. www.astm.org.
- Benedetto, H., et al., 2004. Fatigue of bituminous mixtures. Materials and Structures, 37 (3), 202–216, 10.1007/BF02481620.
- ČSN EN 12697-24+A1, 2007. Bituminous mixtures – test methods for hot mix asphalt – part 24: resistance to fatigue. Prague, Czech Republic: Czech Office for Standards, Metrology and Testing.
- ČSN EN 13108-1, 2008. Bituminous mixtures – material specification – part 1: asphat concrete. Prague, Czech Republic: Czech Office for Standards, Metrology and Testing.
- De La Roche, C., 2001. Essai de Fatigue Sur Lex Enrobés Bitumineux. Résultats de L'expérience D'exactitude. Revue Generale Des Routes (RGRA), 793, 30–33.
- Freeme, C.R. and Marais, C.P., 1973. Thin bituminous surfaces: their fatigue behavior and prediction. Washington, DC: Transportation Research Board Business Office, ISSN 0335-3191.
- Hudson, W.R. and Kennedy, T.W., 1968. An indirect tensile test for stabilized materials. Research Report 9801. Austin, TX: Center for Highway Research, The University of Texas.
- Jaruskova, D., 2006. Probability and mathematical statistics. Prague, Czech Republic: Česká technika – Publishing House ČVUT, ISBN 80-01-03427-5.
- Molenaar, A., 2007. Prediction of fatigue cracking in asphalt pavements: do we follow the right approach?Transportation Research Record: Journal of the Transportation Research Board, 2001 (1), 155–162, 10.3141/2001-17.
- Monismith, C.L., Deacon, J.A., and Harvey, J., 2000. WesTrack: performance models for permanent deformation and fatigue. Berkeley, CA: Pavement Research Center; Institute of Transportation Studies, University of California.
- Monismith, C.L., et al., 2009. Summary report: the phase 1 I-710 freeway rehabilitation project: initial design (1999) to performance after five years of traffic (2009). Davis and Berkeley: University of California.
- Prowell, B.D., et al., 2010. NCHRP report 646: validating the fatigue endurance limit for hot mix asphalt. Washington, DC: Transportation Research Board – National Research Council, ISBN 97-0-309-11821-7.
- Rao Tangela, S.C.S., et al., 1990. Summary Report on Fatigue Response of Asphalt Mixtures. Washington, DC: Strategic Highway Research Program, National Research Council.
- Said, S.F., et al., 2012. Interlaboratory experiment of asphalt concrete using indirect tensile fatigue test. In: 5th Euroasphalt and Eurobitume Congress – 2012. Istanbul: EAPA-European Asphlat Pavement Association, ISBN 978-90-802884-0-91–9.
- SHRP-A-404, 1994. Fatigue Response of Asphalt-Aggregate Mixes. Washington, DC: Strategic Highway Research Program, National Research Council, ISBN 0-309-05812-0.
- TP 170, 2004. Navrhování Vozovek Pozemních Komunikací. Ministry of Transport, Czech Republic. Available from: http://www.pjpk.cz/TP%20170.pdf.
- Tsai, B.W., et al., 2012. Development of fatigue performance specification and its relation to mechanistic-empirical pavement design using four-point bending beams test results. In: Proceedings of 3rd conference on four-point bending. Davis, CA: CRC Press, 59–71.